diff mbox series

[v4,1/5] media: dt-bindings: media: i2c: Deprecate usage of the clock-frequency property

Message ID 1584620363-2255-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
State Not Applicable, archived
Headers show
Series ov5645: Deprecate usage of the clock-frequency | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Lad Prabhakar March 19, 2020, 12:19 p.m. UTC 
Deprecate usage of the clock-frequency property. The preferred method to
set clock rates is to use assigned-clock-rates.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/devicetree/bindings/media/i2c/ov5645.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring (Arm) March 30, 2020, 11:15 p.m. UTC | #1 
On Thu, Mar 19, 2020 at 12:19:19PM +0000, Lad Prabhakar wrote:
> Deprecate usage of the clock-frequency property. The preferred method to
> set clock rates is to use assigned-clock-rates.

Somewhere here and in the subject you should have 'ov5645'. Otherwise,

Acked-by: Rob Herring <robh@kernel.org>

> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  Documentation/devicetree/bindings/media/i2c/ov5645.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index 72ad992f77be..1c85c78ec58c 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
@@ -8,7 +8,6 @@  Required Properties:
 - compatible: Value should be "ovti,ov5645".
 - clocks: Reference to the xclk clock.
 - clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
 - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
   to the hardware pin PWDNB which is physically active low.
 - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
@@ -37,7 +36,8 @@  Example:
 
 			clocks = <&clks 200>;
 			clock-names = "xclk";
-			clock-frequency = <24000000>;
+			assigned-clocks = <&clks 200>;
+			assigned-clock-rates = <24000000>;
 
 			vdddo-supply = <&camera_dovdd_1v8>;
 			vdda-supply = <&camera_avdd_2v8>;