| Message ID | 1540295058-26090-7-git-send-email-aisheng.dong@nxp.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [V2,1/8] dt-bindings: fsl: add compatible for imx7ulp evk | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | "total: 0 errors, 11 warnings, 323 lines checked" |
On Tue, Oct 23, 2018 at 11:49:25AM +0000, A.s. Dong wrote: > The i.MX 7ULP family of processors represents NXP’s latest achievement > in ultra-low-power processing for use cases demanding long battery life. > Targeted towards the growing market of portable devices, the i.MX 7ULP > family of processors features NXP's advanced implementation of the Arm® > Cortex®-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D Graphics > Processing Units (GPUs). > > This patch aims to add the initial support including: > 1) CLK > 2) GPIO PTC, PTD, PTE, PTF > 3) uSDHC 1/2 > 4) LPUART 4/5/6/7 > 5) LPI2C 6/7 > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: devicetree@vger.kernel.org > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > --- > ChangeLog: > v1->v2: > * update clk part due to binding change > * separate soc.dtsi from board.dts > --- > arch/arm/boot/dts/imx7ulp.dtsi | 323 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 323 insertions(+) > create mode 100644 arch/arm/boot/dts/imx7ulp.dtsi > > diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi > new file mode 100644 > index 0000000..795edc2 > --- /dev/null > +++ b/arch/arm/boot/dts/imx7ulp.dtsi > @@ -0,0 +1,323 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017-2018 NXP > + * Dong Aisheng <aisheng.dong@nxp.com> > + */ > + > +#include <dt-bindings/clock/imx7ulp-clock.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +#include "imx7ulp-pinfunc.h" > + > +/ { > + interrupt-parent = <&intc>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + aliases { > + gpio0 = &gpio_ptc; > + gpio1 = &gpio_ptd; > + gpio2 = &gpio_pte; > + gpio3 = &gpio_ptf; > + i2c0 = &lpi2c6; > + i2c1 = &lpi2c7; > + mmc0 = &usdhc0; > + mmc1 = &usdhc1; > + serial0 = &lpuart4; > + serial1 = &lpuart5; > + serial2 = &lpuart6; > + serial3 = &lpuart7; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu0: cpu@0 { > + compatible = "arm,cortex-a7"; > + device_type = "cpu"; > + reg = <0>; > + }; > + }; > + > + intc: interrupt-controller@40021000 { > + compatible = "arm,cortex-a7-gic"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x40021000 0x1000>, > + <0x40022000 0x1000>; > + }; > + > + rosc: clock-rosc { > + compatible = "fixed-clock"; > + clock-frequency = <32768>; > + clock-output-names = "rosc"; > + #clock-cells = <0>; > + }; > + > + sosc: clock-sosc { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "sosc"; > + #clock-cells = <0>; > + }; > + > + sirc: clock-sirc { > + compatible = "fixed-clock"; > + clock-frequency = <16000000>; > + clock-output-names = "sirc"; > + #clock-cells = <0>; > + }; > + > + firc: clock-firc { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + clock-output-names = "firc"; > + #clock-cells = <0>; > + }; > + > + upll: clock-upll { > + compatible = "fixed-clock"; > + clock-frequency = <480000000>; > + clock-output-names = "upll"; > + #clock-cells = <0>; > + }; > + > + mpll: clock-mpll { > + compatible = "fixed-clock"; > + clock-frequency = <480000000>; > + clock-output-names = "mpll"; > + #clock-cells = <0>; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + arm,cpu-registers-not-fw-configured; AIUI, this was a work-around for some existing platform. New platforms should not have this property. > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <1000000>; This too should be initialized by firmware and not in DT IIRC. > + status = "disabled"; I think enabled should be the norm. > + }; > + > + ahbbridge0: bus@40000000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x40000000 0x800000>; > + ranges; > + > + lpuart4: serial@402d0000 { > + compatible = "fsl,imx7ulp-lpuart"; > + reg = <0x402d0000 0x1000>; > + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; > + clock-names = "ipg"; > + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; > + assigned-clock-rates = <24000000>; > + status = "disabled"; > + }; > + > + lpuart5: serial@402e0000 { > + compatible = "fsl,imx7ulp-lpuart"; > + reg = <0x402e0000 0x1000>; > + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; > + clock-names = "ipg"; > + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + tpm5: tpm@40260000 { > + compatible = "fsl,imx7ulp-tpm"; > + reg = <0x40260000 0x1000>; > + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, > + <&pcc2 IMX7ULP_CLK_LPTPM5>; > + clock-names = "ipg", "per"; > + }; > + > + usdhc0: usdhc@40370000 { mmc@... is the standard name. > + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; > + reg = <0x40370000 0x10000>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, > + <&scg1 IMX7ULP_CLK_NIC1_DIV>, > + <&pcc2 IMX7ULP_CLK_USDHC0>; > + clock-names ="ipg", "ahb", "per"; > + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; > + bus-width = <4>; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + status = "disabled"; > + }; > + > + usdhc1: usdhc@40380000 { ditto. > + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; > + reg = <0x40380000 0x10000>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, > + <&scg1 IMX7ULP_CLK_NIC1_DIV>, > + <&pcc2 IMX7ULP_CLK_USDHC1>; > + clock-names ="ipg", "ahb", "per"; > + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; > + bus-width = <4>; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + status = "disabled"; > + }; > + > + scg1: scg1@403e0000 { clock-controller@... > + compatible = "fsl,imx7ulp-scg1"; > + reg = <0x403e0000 0x10000>; > + clocks = <&rosc>, <&sosc>, <&sirc>, > + <&firc>, <&upll>, <&mpll>; > + clock-names = "rosc", "sosc", "sirc", > + "firc", "upll", "mpll"; > + #clock-cells = <1>; > + }; > + > + pcc2: pcc2@403f0000 { clock-controller@... > + compatible = "fsl,imx7ulp-pcc2"; > + reg = <0x403f0000 0x10000>; > + #clock-cells = <1>; > + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; > + }; > + > + smc1: smc1@40410000 { > + compatible = "fsl,imx7ulp-smc1"; > + reg = <0x40410000 0x1000>; > + }; > + > + pcc3: pcc3@40b30000 { clock-controller@... > + compatible = "fsl,imx7ulp-pcc3"; > + reg = <0x40b30000 0x10000>; > + #clock-cells = <1>; > + }; > + }; > + > + ahbbridge1: bus@40800000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x40800000 0x800000>; > + ranges; > + > + lpi2c6: lpi2c@40a40000 { i2c@... > + compatible = "fsl,imx7ulp-lpi2c"; > + reg = <0x40a40000 0x10000>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; > + clock-names = "ipg"; > + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpi2c7: lpi2c@40a50000 { i2c@... > + compatible = "fsl,imx7ulp-lpi2c"; > + reg = <0x40a50000 0x10000>; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; > + clock-names = "ipg"; > + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpuart6: serial@40a60000 { > + compatible = "fsl,imx7ulp-lpuart"; > + reg = <0x40a60000 0x1000>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; > + clock-names = "ipg"; > + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + lpuart7: serial@40a70000 { > + compatible = "fsl,imx7ulp-lpuart"; > + reg = <0x40a70000 0x1000>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; > + clock-names = "ipg"; > + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; > + assigned-clock-rates = <48000000>; > + status = "disabled"; > + }; > + > + iomuxc1: iomuxc@40ac0000 { pinctrl@... > + compatible = "fsl,imx7ulp-iomuxc1"; > + reg = <0x40ac0000 0x1000>; > + }; > + > + gpio_ptc: gpio@40ae0000 { > + compatible = "fsl,vf610-gpio"; > + reg = <0x40ae0000 0x1000 0x400f0000 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, > + <&pcc3 IMX7ULP_CLK_PCTLC>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 0 32>; > + }; > + > + gpio_ptd: gpio@40af0000 { > + compatible = "fsl,vf610-gpio"; > + reg = <0x40af0000 0x1000 0x400f0040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, > + <&pcc3 IMX7ULP_CLK_PCTLD>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 32 32>; > + }; > + > + gpio_pte: gpio@40b00000 { > + compatible = "fsl,vf610-gpio"; > + reg = <0x40b00000 0x1000 0x400f0080 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, > + <&pcc3 IMX7ULP_CLK_PCTLE>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 64 32>; > + }; > + > + gpio_ptf: gpio@40b10000 { > + compatible = "fsl,vf610-gpio"; > + reg = <0x40b10000 0x1000 0x400f00c0 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, > + <&pcc3 IMX7ULP_CLK_PCTLF>; > + clock-names = "gpio", "port"; > + gpio-ranges = <&iomuxc1 0 96 32>; > + }; > + }; > +}; > -- > 2.7.4 >
> -----Original Message----- > From: Rob Herring [mailto:robh@kernel.org] > Sent: Thursday, October 25, 2018 6:02 AM [...] > On Tue, Oct 23, 2018 at 11:49:25AM +0000, A.s. Dong wrote: > > The i.MX 7ULP family of processors represents NXP’s latest achievement > > in ultra-low-power processing for use cases demanding long battery life. > > Targeted towards the growing market of portable devices, the i.MX 7ULP > > family of processors features NXP's advanced implementation of the > > Arm® > > Cortex®-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D > > Graphics Processing Units (GPUs). > > > > This patch aims to add the initial support including: > > 1) CLK > > 2) GPIO PTC, PTD, PTE, PTF > > 3) uSDHC 1/2 > > 4) LPUART 4/5/6/7 > > 5) LPI2C 6/7 > > > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: devicetree@vger.kernel.org > > Cc: Sascha Hauer <kernel@pengutronix.de> > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > --- > > ChangeLog: > > v1->v2: > > * update clk part due to binding change > > * separate soc.dtsi from board.dts > > --- > > arch/arm/boot/dts/imx7ulp.dtsi | 323 > > +++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 323 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx7ulp.dtsi > > > > diff --git a/arch/arm/boot/dts/imx7ulp.dtsi > > b/arch/arm/boot/dts/imx7ulp.dtsi new file mode 100644 index > > 0000000..795edc2 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx7ulp.dtsi > > @@ -0,0 +1,323 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017-2018 NXP > > + * Dong Aisheng <aisheng.dong@nxp.com> > > + */ > > + > > +#include <dt-bindings/clock/imx7ulp-clock.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +#include "imx7ulp-pinfunc.h" > > + > > +/ { > > + interrupt-parent = <&intc>; > > + > > + #address-cells = <1>; > > + #size-cells = <1>; > > + > > + aliases { > > + gpio0 = &gpio_ptc; > > + gpio1 = &gpio_ptd; > > + gpio2 = &gpio_pte; > > + gpio3 = &gpio_ptf; > > + i2c0 = &lpi2c6; > > + i2c1 = &lpi2c7; > > + mmc0 = &usdhc0; > > + mmc1 = &usdhc1; > > + serial0 = &lpuart4; > > + serial1 = &lpuart5; > > + serial2 = &lpuart6; > > + serial3 = &lpuart7; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + cpu0: cpu@0 { > > + compatible = "arm,cortex-a7"; > > + device_type = "cpu"; > > + reg = <0>; > > + }; > > + }; > > + > > + intc: interrupt-controller@40021000 { > > + compatible = "arm,cortex-a7-gic"; > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + reg = <0x40021000 0x1000>, > > + <0x40022000 0x1000>; > > + }; > > + > > + rosc: clock-rosc { > > + compatible = "fixed-clock"; > > + clock-frequency = <32768>; > > + clock-output-names = "rosc"; > > + #clock-cells = <0>; > > + }; > > + > > + sosc: clock-sosc { > > + compatible = "fixed-clock"; > > + clock-frequency = <24000000>; > > + clock-output-names = "sosc"; > > + #clock-cells = <0>; > > + }; > > + > > + sirc: clock-sirc { > > + compatible = "fixed-clock"; > > + clock-frequency = <16000000>; > > + clock-output-names = "sirc"; > > + #clock-cells = <0>; > > + }; > > + > > + firc: clock-firc { > > + compatible = "fixed-clock"; > > + clock-frequency = <48000000>; > > + clock-output-names = "firc"; > > + #clock-cells = <0>; > > + }; > > + > > + upll: clock-upll { > > + compatible = "fixed-clock"; > > + clock-frequency = <480000000>; > > + clock-output-names = "upll"; > > + #clock-cells = <0>; > > + }; > > + > > + mpll: clock-mpll { > > + compatible = "fixed-clock"; > > + clock-frequency = <480000000>; > > + clock-output-names = "mpll"; > > + #clock-cells = <0>; > > + }; > > + > > + timer { > > + compatible = "arm,armv7-timer"; > > + arm,cpu-registers-not-fw-configured; > > AIUI, this was a work-around for some existing platform. New platforms should > not have this property. > > > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | > IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | > IRQ_TYPE_LEVEL_LOW)>; > > + clock-frequency = <1000000>; > > This too should be initialized by firmware and not in DT IIRC. > Sorry for the careless. I should double checking these codes before sending as the origin code base is quite old since first version. > > + status = "disabled"; > > I think enabled should be the norm. > This is mostly because the arm timer may stop during low power idle and we already have a TPM timer function the same in SoC. Do you think we should still enable it? > > + }; > > + > > + ahbbridge0: bus@40000000 { > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + reg = <0x40000000 0x800000>; > > + ranges; > > + > > + lpuart4: serial@402d0000 { > > + compatible = "fsl,imx7ulp-lpuart"; > > + reg = <0x402d0000 0x1000>; > > + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; > > + clock-names = "ipg"; > > + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; > > + assigned-clock-parents = <&scg1 > IMX7ULP_CLK_SOSC_BUS_CLK>; > > + assigned-clock-rates = <24000000>; > > + status = "disabled"; > > + }; > > + > > + lpuart5: serial@402e0000 { > > + compatible = "fsl,imx7ulp-lpuart"; > > + reg = <0x402e0000 0x1000>; > > + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; > > + clock-names = "ipg"; > > + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; > > + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; > > + assigned-clock-rates = <48000000>; > > + status = "disabled"; > > + }; > > + > > + tpm5: tpm@40260000 { > > + compatible = "fsl,imx7ulp-tpm"; > > + reg = <0x40260000 0x1000>; > > + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, > > + <&pcc2 IMX7ULP_CLK_LPTPM5>; > > + clock-names = "ipg", "per"; > > + }; > > + > > + usdhc0: usdhc@40370000 { > > mmc@... is the standard name. > I should be more careful about these. Other places are the same. Thanks for the reminder. Regards Dong Aisheng
On Tue, Oct 23, 2018 at 8:55 AM A.s. Dong <aisheng.dong@nxp.com> wrote: > + gpio_ptc: gpio@40ae0000 { > + compatible = "fsl,vf610-gpio"; This should be: compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
> -----Original Message----- > From: Fabio Estevam [mailto:festevam@gmail.com] > Sent: Friday, October 26, 2018 12:44 AM [...] > On Tue, Oct 23, 2018 at 8:55 AM A.s. Dong <aisheng.dong@nxp.com> wrote: > > > + gpio_ptc: gpio@40ae0000 { > > + compatible = "fsl,vf610-gpio"; > > This should be: > > compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; That's true. Thanks for reminder. Regards Dong Aisheng
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi new file mode 100644 index 0000000..795edc2 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx7ulp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx7ulp-pinfunc.h" + +/ { + interrupt-parent = <&intc>; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio_ptc; + gpio1 = &gpio_ptd; + gpio2 = &gpio_pte; + gpio3 = &gpio_ptf; + i2c0 = &lpi2c6; + i2c1 = &lpi2c7; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + intc: interrupt-controller@40021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40021000 0x1000>, + <0x40022000 0x1000>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + sirc: clock-sirc { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "sirc"; + #clock-cells = <0>; + }; + + firc: clock-firc { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + clock-output-names = "firc"; + #clock-cells = <0>; + }; + + upll: clock-upll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "upll"; + #clock-cells = <0>; + }; + + mpll: clock-mpll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "mpll"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <1000000>; + status = "disabled"; + }; + + ahbbridge0: bus@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x800000>; + ranges; + + lpuart4: serial@402d0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402d0000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + assigned-clock-rates = <24000000>; + status = "disabled"; + }; + + lpuart5: serial@402e0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402e0000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&pcc2 IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; + }; + + usdhc0: usdhc@40370000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40370000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC0>; + clock-names ="ipg", "ahb", "per"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc1: usdhc@40380000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + scg1: scg1@403e0000 { + compatible = "fsl,imx7ulp-scg1"; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; + }; + + pcc2: pcc2@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + }; + + smc1: smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + }; + + pcc3: pcc3@40b30000 { + compatible = "fsl,imx7ulp-pcc3"; + reg = <0x40b30000 0x10000>; + #clock-cells = <1>; + }; + }; + + ahbbridge1: bus@40800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40800000 0x800000>; + ranges; + + lpi2c6: lpi2c@40a40000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a40000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c7: lpi2c@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a50000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart6: serial@40a60000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a60000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart7: serial@40a70000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a70000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + iomuxc1: iomuxc@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + }; + + gpio_ptc: gpio@40ae0000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40ae0000 0x1000 0x400f0000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLC>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 0 32>; + }; + + gpio_ptd: gpio@40af0000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40af0000 0x1000 0x400f0040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLD>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 32>; + }; + + gpio_pte: gpio@40b00000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40b00000 0x1000 0x400f0080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 32>; + }; + + gpio_ptf: gpio@40b10000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40b10000 0x1000 0x400f00c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 96 32>; + }; + }; +};
The i.MX 7ULP family of processors represents NXP’s latest achievement in ultra-low-power processing for use cases demanding long battery life. Targeted towards the growing market of portable devices, the i.MX 7ULP family of processors features NXP's advanced implementation of the Arm® Cortex®-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D Graphics Processing Units (GPUs). This patch aims to add the initial support including: 1) CLK 2) GPIO PTC, PTD, PTE, PTF 3) uSDHC 1/2 4) LPUART 4/5/6/7 5) LPI2C 6/7 Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v1->v2: * update clk part due to binding change * separate soc.dtsi from board.dts --- arch/arm/boot/dts/imx7ulp.dtsi | 323 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 arch/arm/boot/dts/imx7ulp.dtsi