| Message ID | 1540127173-21346-7-git-send-email-aisheng.dong@nxp.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | None | expand |
On Sun, Oct 21, 2018 at 01:11:09PM +0000, A.s. Dong wrote: > i.MX7ULP Clock functions are under joint control of the System > Clock Generation (SCG) modules, Peripheral Clock Control (PCC) > modules, and Core Mode Controller (CMC)1 blocks > > Note IMX7ULP has two clock domains: M4 and A7. This binding doc > is only for A7 clock domain. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: devicetree@vger.kernel.org > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Anson Huang <Anson.Huang@nxp.com> > Cc: Bai Ping <ping.bai@nxp.com> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > --- > ChangeLog: > v3->v4: > * make scg, pcc separate nodes according to Rob's suggestion > v2->v3: > * no changes > v1->v2: no changes > --- > .../devicetree/bindings/clock/imx7ulp-clock.txt | 87 ++++++++++++++++ > include/dt-bindings/clock/imx7ulp-clock.h | 109 +++++++++++++++++++++ > 2 files changed, 196 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h > > diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > new file mode 100644 > index 0000000..2239383 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > @@ -0,0 +1,87 @@ > +* Clock bindings for Freescale i.MX7ULP > + > +i.MX7ULP Clock functions are under joint control of the System > +Clock Generation (SCG) modules, Peripheral Clock Control (PCC) > +modules, and Core Mode Controller (CMC)1 blocks > + > +The clocking scheme provides clear separation between M4 domain > +and A7 domain. Except for a few clock sources shared between two > +domains, such as the System Oscillator clock, the Slow IRC (SIRC), > +and and the Fast IRC clock (FIRCLK), clock sources and clock > +management are separated and contained within each domain. > + > +M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. > +A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. Where's the CMC1 binding? > + > +Note: this binding doc is only for A7 clock domain. > + > +System Clock Generation (SCG) modules: > +--------------------------------------------------------------------- > +The System Clock Generation (SCG) is responsible for clock generation > +and distribution across this device. Functions performed by the SCG > +include: clock reference selection, generation of clock used to derive > +processor, system, peripheral bus and external memory interface clocks, > +source selection for peripheral clocks and control of power saving > +clock gating mode. > + > +Required properties: > + > +- compatible: Should be "fsl,imx7ulp-scg1". > +- reg : Should contain registers location and length. > +- #clock-cells: Should be <1>. > +- clocks: Should contain the fixed input clocks. > +- clock-name: Should contain the following clock names:"rosc", "sosc", clock-names > + "sirc", "firc", "upll", "mpll". > + > +Peripheral Clock Control (PCC) modules: > +--------------------------------------------------------------------- > +The Peripheral Clock Control (PCC) is responsible for clock selection, > +optional division and clock gating mode for peripherals in their > +respected power domain > + > +Required properties: > +- compatible: Should be "fsl,imx7ulp-pcc2" or "fsl,imx7ulp-pcc3". Please format one per line. There's some register layout difference between PCC2 and PCC3? > +- reg : Should contain registers location and length. > +- #clock-cells: Should be <1>. No input clocks to list? > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. > +See include/dt-bindings/clock/imx7ulp-clock.h > +for the full list of i.MX7ULP clock IDs of each module. > + > +Examples: > + > +#include <dt-bindings/clock/imx7ulp-clock.h> > + > +scg1: scg1@403e0000 { > + compatible = "fsl,imx7ulp-scg1; > + reg = <0x403e0000 0x10000>; > + clocks = <&rosc>, <&sosc>, <&sirc>, > + <&firc>, <&upll>, <&mpll>; > + clock-names = "rosc", "sosc", "sirc", > + "firc", "upll", "mpll"; > + #clock-cells = <1>; > +}; > + > +pcc2: pcc2@403f0000 { > + compatible = "fsl,imx7ulp-pcc2"; > + reg = <0x403f0000 0x10000>; > + #clock-cells = <1>; > +}; > + > +pcc3: pcc3@40b30000 { > + compatible = "fsl,imx7ulp-pcc3"; > + reg = <0x40b30000 0x10000>; > + #clock-cells = <1>; > +}; > + > +usdhc1: usdhc@40380000 { > + compatible = "fsl,imx7ulp-usdhc"; > + reg = <0x40380000 0x10000>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, > + <&scg1 IMX7ULP_CLK_NIC1_DIV>, > + <&pcc2 IMX7ULP_CLK_USDHC1>; > + clock-names ="ipg", "ahb", "per"; > + bus-width = <4>; > +}; > diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h > new file mode 100644 > index 0000000..008c5ee > --- /dev/null > +++ b/include/dt-bindings/clock/imx7ulp-clock.h > @@ -0,0 +1,109 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Copyright 2017~2018 NXP > + * > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_IMX7ULP_H > +#define __DT_BINDINGS_CLOCK_IMX7ULP_H > + > +/* SCG1 */ > + > +#define IMX7ULP_CLK_DUMMY 0 > +#define IMX7ULP_CLK_ROSC 1 > +#define IMX7ULP_CLK_SOSC 2 > +#define IMX7ULP_CLK_FIRC 3 > +#define IMX7ULP_CLK_SPLL_PRE_SEL 4 > +#define IMX7ULP_CLK_SPLL_PRE_DIV 5 > +#define IMX7ULP_CLK_SPLL 6 > +#define IMX7ULP_CLK_SPLL_POST_DIV1 7 > +#define IMX7ULP_CLK_SPLL_POST_DIV2 8 > +#define IMX7ULP_CLK_SPLL_PFD0 9 > +#define IMX7ULP_CLK_SPLL_PFD1 10 > +#define IMX7ULP_CLK_SPLL_PFD2 11 > +#define IMX7ULP_CLK_SPLL_PFD3 12 > +#define IMX7ULP_CLK_SPLL_PFD_SEL 13 > +#define IMX7ULP_CLK_SPLL_SEL 14 > +#define IMX7ULP_CLK_APLL_PRE_SEL 15 > +#define IMX7ULP_CLK_APLL_PRE_DIV 16 > +#define IMX7ULP_CLK_APLL 17 > +#define IMX7ULP_CLK_APLL_POST_DIV1 18 > +#define IMX7ULP_CLK_APLL_POST_DIV2 19 > +#define IMX7ULP_CLK_APLL_PFD0 20 > +#define IMX7ULP_CLK_APLL_PFD1 21 > +#define IMX7ULP_CLK_APLL_PFD2 22 > +#define IMX7ULP_CLK_APLL_PFD3 23 > +#define IMX7ULP_CLK_APLL_PFD_SEL 24 > +#define IMX7ULP_CLK_APLL_SEL 25 > +#define IMX7ULP_CLK_UPLL 26 > +#define IMX7ULP_CLK_SYS_SEL 27 > +#define IMX7ULP_CLK_CORE_DIV 28 > +#define IMX7ULP_CLK_BUS_DIV 29 > +#define IMX7ULP_CLK_PLAT_DIV 30 > +#define IMX7ULP_CLK_DDR_SEL 31 > +#define IMX7ULP_CLK_DDR_DIV 32 > +#define IMX7ULP_CLK_NIC_SEL 33 > +#define IMX7ULP_CLK_NIC0_DIV 34 > +#define IMX7ULP_CLK_GPU_DIV 35 > +#define IMX7ULP_CLK_NIC1_DIV 36 > +#define IMX7ULP_CLK_NIC1_BUS_DIV 37 > +#define IMX7ULP_CLK_NIC1_EXT_DIV 38 > +#define IMX7ULP_CLK_MIPI_PLL 39 > +#define IMX7ULP_CLK_SIRC 40 > +#define IMX7ULP_CLK_SOSC_BUS_CLK 41 > +#define IMX7ULP_CLK_FIRC_BUS_CLK 42 > +#define IMX7ULP_CLK_SPLL_BUS_CLK 43 > + > +#define IMX7ULP_CLK_SCG1_END 44 > + > +/* PCC2 */ > +#define IMX7ULP_CLK_DMA1 0 > +#define IMX7ULP_CLK_RGPIO2P1 1 > +#define IMX7ULP_CLK_FLEXBUS 2 > +#define IMX7ULP_CLK_SEMA42_1 3 > +#define IMX7ULP_CLK_DMA_MUX1 4 > +#define IMX7ULP_CLK_SNVS 5 > +#define IMX7ULP_CLK_CAAM 6 > +#define IMX7ULP_CLK_LPTPM4 7 > +#define IMX7ULP_CLK_LPTPM5 8 > +#define IMX7ULP_CLK_LPIT1 9 > +#define IMX7ULP_CLK_LPSPI2 10 > +#define IMX7ULP_CLK_LPSPI3 11 > +#define IMX7ULP_CLK_LPI2C4 12 > +#define IMX7ULP_CLK_LPI2C5 13 > +#define IMX7ULP_CLK_LPUART4 14 > +#define IMX7ULP_CLK_LPUART5 15 > +#define IMX7ULP_CLK_FLEXIO1 16 > +#define IMX7ULP_CLK_USB0 17 > +#define IMX7ULP_CLK_USB1 18 > +#define IMX7ULP_CLK_USB_PHY 19 > +#define IMX7ULP_CLK_USB_PL301 20 > +#define IMX7ULP_CLK_USDHC0 21 > +#define IMX7ULP_CLK_USDHC1 22 > +#define IMX7ULP_CLK_WDG1 23 > +#define IMX7ULP_CLK_WDG2 24 > + > +#define IMX7ULP_CLK_PCC2_END 25 > + > +/* PCC3 */ > +#define IMX7ULP_CLK_LPTPM6 0 > +#define IMX7ULP_CLK_LPTPM7 1 > +#define IMX7ULP_CLK_LPI2C6 2 > +#define IMX7ULP_CLK_LPI2C7 3 > +#define IMX7ULP_CLK_LPUART6 4 > +#define IMX7ULP_CLK_LPUART7 5 > +#define IMX7ULP_CLK_VIU 6 > +#define IMX7ULP_CLK_DSI 7 > +#define IMX7ULP_CLK_LCDIF 8 > +#define IMX7ULP_CLK_MMDC 9 > +#define IMX7ULP_CLK_PCTLC 10 > +#define IMX7ULP_CLK_PCTLD 11 > +#define IMX7ULP_CLK_PCTLE 12 > +#define IMX7ULP_CLK_PCTLF 13 > +#define IMX7ULP_CLK_GPU3D 14 > +#define IMX7ULP_CLK_GPU2D 15 > + > +#define IMX7ULP_CLK_PCC3_END 16 > + > +#endif /* __DT_BINDINGS_CLOCK_IMX7ULP_H */ > -- > 2.7.4 >
> -----Original Message----- > From: Rob Herring [mailto:robh@kernel.org] > Sent: Tuesday, October 23, 2018 6:17 AM [...] > > On Sun, Oct 21, 2018 at 01:11:09PM +0000, A.s. Dong wrote: > > i.MX7ULP Clock functions are under joint control of the System Clock > > Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and > > Core Mode Controller (CMC)1 blocks > > > > Note IMX7ULP has two clock domains: M4 and A7. This binding doc is > > only for A7 clock domain. > > > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: Stephen Boyd <sboyd@codeaurora.org> > > Cc: Michael Turquette <mturquette@baylibre.com> > > Cc: devicetree@vger.kernel.org > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Anson Huang <Anson.Huang@nxp.com> > > Cc: Bai Ping <ping.bai@nxp.com> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > --- > > ChangeLog: > > v3->v4: > > * make scg, pcc separate nodes according to Rob's suggestion > > v2->v3: > > * no changes > > v1->v2: no changes > > --- > > .../devicetree/bindings/clock/imx7ulp-clock.txt | 87 > ++++++++++++++++ > > include/dt-bindings/clock/imx7ulp-clock.h | 109 > +++++++++++++++++++++ > > 2 files changed, 196 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > > create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h > > > > diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > > b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > > new file mode 100644 > > index 0000000..2239383 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt > > @@ -0,0 +1,87 @@ > > +* Clock bindings for Freescale i.MX7ULP > > + > > +i.MX7ULP Clock functions are under joint control of the System Clock > > +Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and > > +Core Mode Controller (CMC)1 blocks > > + > > +The clocking scheme provides clear separation between M4 domain and > > +A7 domain. Except for a few clock sources shared between two domains, > > +such as the System Oscillator clock, the Slow IRC (SIRC), and and the > > +Fast IRC clock (FIRCLK), clock sources and clock management are > > +separated and contained within each domain. > > + > > +M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. > > +A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. > > Where's the CMC1 binding? > CMC module is more related to low power control, so did not put in clock series. But yes, it's missed in early series, will add it in next Arch patch series. > > + > > +Note: this binding doc is only for A7 clock domain. > > + > > +System Clock Generation (SCG) modules: > > +--------------------------------------------------------------------- > > +The System Clock Generation (SCG) is responsible for clock generation > > +and distribution across this device. Functions performed by the SCG > > +include: clock reference selection, generation of clock used to > > +derive processor, system, peripheral bus and external memory > > +interface clocks, source selection for peripheral clocks and control > > +of power saving clock gating mode. > > + > > +Required properties: > > + > > +- compatible: Should be "fsl,imx7ulp-scg1". > > +- reg : Should contain registers location and length. > > +- #clock-cells: Should be <1>. > > +- clocks: Should contain the fixed input clocks. > > +- clock-name: Should contain the following clock names:"rosc", "sosc", > > clock-names > Got it > > + "sirc", "firc", "upll", "mpll". > > + > > +Peripheral Clock Control (PCC) modules: > > +--------------------------------------------------------------------- > > +The Peripheral Clock Control (PCC) is responsible for clock > > +selection, optional division and clock gating mode for peripherals in > > +their respected power domain > > + > > +Required properties: > > +- compatible: Should be "fsl,imx7ulp-pcc2" or "fsl,imx7ulp-pcc3". > > Please format one per line. > Got it > There's some register layout difference between PCC2 and PCC3? > Yes, they're for different clocks and the layout may be slightly different. For example, some clocks support rate setting (with dividers) while some of them not. > > +- reg : Should contain registers location and length. > > +- #clock-cells: Should be <1>. > > No input clocks to list? > Sorry for missing them, should add it. Appreciate for the review. Regards Dong Aisheng > > + > > +The clock consumer should specify the desired clock by having the > > +clock ID in its "clocks" phandle cell. > > +See include/dt-bindings/clock/imx7ulp-clock.h > > +for the full list of i.MX7ULP clock IDs of each module. > > + > > +Examples: > > + > > +#include <dt-bindings/clock/imx7ulp-clock.h> > > + > > +scg1: scg1@403e0000 { > > + compatible = "fsl,imx7ulp-scg1; > > + reg = <0x403e0000 0x10000>; > > + clocks = <&rosc>, <&sosc>, <&sirc>, > > + <&firc>, <&upll>, <&mpll>; > > + clock-names = "rosc", "sosc", "sirc", > > + "firc", "upll", "mpll"; > > + #clock-cells = <1>; > > +}; > > + > > +pcc2: pcc2@403f0000 { > > + compatible = "fsl,imx7ulp-pcc2"; > > + reg = <0x403f0000 0x10000>; > > + #clock-cells = <1>; > > +}; > > + > > +pcc3: pcc3@40b30000 { > > + compatible = "fsl,imx7ulp-pcc3"; > > + reg = <0x40b30000 0x10000>; > > + #clock-cells = <1>; > > +}; > > + > > +usdhc1: usdhc@40380000 { > > + compatible = "fsl,imx7ulp-usdhc"; > > + reg = <0x40380000 0x10000>; > > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, > > + <&scg1 IMX7ULP_CLK_NIC1_DIV>, > > + <&pcc2 IMX7ULP_CLK_USDHC1>; > > + clock-names ="ipg", "ahb", "per"; > > + bus-width = <4>; > > +}; > > diff --git a/include/dt-bindings/clock/imx7ulp-clock.h > > b/include/dt-bindings/clock/imx7ulp-clock.h > > new file mode 100644 > > index 0000000..008c5ee > > --- /dev/null > > +++ b/include/dt-bindings/clock/imx7ulp-clock.h > > @@ -0,0 +1,109 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * Copyright 2017~2018 NXP > > + * > > + */ > > + > > +#ifndef __DT_BINDINGS_CLOCK_IMX7ULP_H #define > > +__DT_BINDINGS_CLOCK_IMX7ULP_H > > + > > +/* SCG1 */ > > + > > +#define IMX7ULP_CLK_DUMMY 0 > > +#define IMX7ULP_CLK_ROSC 1 > > +#define IMX7ULP_CLK_SOSC 2 > > +#define IMX7ULP_CLK_FIRC 3 > > +#define IMX7ULP_CLK_SPLL_PRE_SEL 4 > > +#define IMX7ULP_CLK_SPLL_PRE_DIV 5 > > +#define IMX7ULP_CLK_SPLL 6 > > +#define IMX7ULP_CLK_SPLL_POST_DIV1 7 > > +#define IMX7ULP_CLK_SPLL_POST_DIV2 8 > > +#define IMX7ULP_CLK_SPLL_PFD0 9 > > +#define IMX7ULP_CLK_SPLL_PFD1 10 > > +#define IMX7ULP_CLK_SPLL_PFD2 11 > > +#define IMX7ULP_CLK_SPLL_PFD3 12 > > +#define IMX7ULP_CLK_SPLL_PFD_SEL 13 > > +#define IMX7ULP_CLK_SPLL_SEL 14 > > +#define IMX7ULP_CLK_APLL_PRE_SEL 15 > > +#define IMX7ULP_CLK_APLL_PRE_DIV 16 > > +#define IMX7ULP_CLK_APLL 17 > > +#define IMX7ULP_CLK_APLL_POST_DIV1 18 > > +#define IMX7ULP_CLK_APLL_POST_DIV2 19 > > +#define IMX7ULP_CLK_APLL_PFD0 20 > > +#define IMX7ULP_CLK_APLL_PFD1 21 > > +#define IMX7ULP_CLK_APLL_PFD2 22 > > +#define IMX7ULP_CLK_APLL_PFD3 23 > > +#define IMX7ULP_CLK_APLL_PFD_SEL 24 > > +#define IMX7ULP_CLK_APLL_SEL 25 > > +#define IMX7ULP_CLK_UPLL 26 > > +#define IMX7ULP_CLK_SYS_SEL 27 > > +#define IMX7ULP_CLK_CORE_DIV 28 > > +#define IMX7ULP_CLK_BUS_DIV 29 > > +#define IMX7ULP_CLK_PLAT_DIV 30 > > +#define IMX7ULP_CLK_DDR_SEL 31 > > +#define IMX7ULP_CLK_DDR_DIV 32 > > +#define IMX7ULP_CLK_NIC_SEL 33 > > +#define IMX7ULP_CLK_NIC0_DIV 34 > > +#define IMX7ULP_CLK_GPU_DIV 35 > > +#define IMX7ULP_CLK_NIC1_DIV 36 > > +#define IMX7ULP_CLK_NIC1_BUS_DIV 37 > > +#define IMX7ULP_CLK_NIC1_EXT_DIV 38 > > +#define IMX7ULP_CLK_MIPI_PLL 39 > > +#define IMX7ULP_CLK_SIRC 40 > > +#define IMX7ULP_CLK_SOSC_BUS_CLK 41 > > +#define IMX7ULP_CLK_FIRC_BUS_CLK 42 > > +#define IMX7ULP_CLK_SPLL_BUS_CLK 43 > > + > > +#define IMX7ULP_CLK_SCG1_END 44 > > + > > +/* PCC2 */ > > +#define IMX7ULP_CLK_DMA1 0 > > +#define IMX7ULP_CLK_RGPIO2P1 1 > > +#define IMX7ULP_CLK_FLEXBUS 2 > > +#define IMX7ULP_CLK_SEMA42_1 3 > > +#define IMX7ULP_CLK_DMA_MUX1 4 > > +#define IMX7ULP_CLK_SNVS 5 > > +#define IMX7ULP_CLK_CAAM 6 > > +#define IMX7ULP_CLK_LPTPM4 7 > > +#define IMX7ULP_CLK_LPTPM5 8 > > +#define IMX7ULP_CLK_LPIT1 9 > > +#define IMX7ULP_CLK_LPSPI2 10 > > +#define IMX7ULP_CLK_LPSPI3 11 > > +#define IMX7ULP_CLK_LPI2C4 12 > > +#define IMX7ULP_CLK_LPI2C5 13 > > +#define IMX7ULP_CLK_LPUART4 14 > > +#define IMX7ULP_CLK_LPUART5 15 > > +#define IMX7ULP_CLK_FLEXIO1 16 > > +#define IMX7ULP_CLK_USB0 17 > > +#define IMX7ULP_CLK_USB1 18 > > +#define IMX7ULP_CLK_USB_PHY 19 > > +#define IMX7ULP_CLK_USB_PL301 20 > > +#define IMX7ULP_CLK_USDHC0 21 > > +#define IMX7ULP_CLK_USDHC1 22 > > +#define IMX7ULP_CLK_WDG1 23 > > +#define IMX7ULP_CLK_WDG2 24 > > + > > +#define IMX7ULP_CLK_PCC2_END 25 > > + > > +/* PCC3 */ > > +#define IMX7ULP_CLK_LPTPM6 0 > > +#define IMX7ULP_CLK_LPTPM7 1 > > +#define IMX7ULP_CLK_LPI2C6 2 > > +#define IMX7ULP_CLK_LPI2C7 3 > > +#define IMX7ULP_CLK_LPUART6 4 > > +#define IMX7ULP_CLK_LPUART7 5 > > +#define IMX7ULP_CLK_VIU 6 > > +#define IMX7ULP_CLK_DSI 7 > > +#define IMX7ULP_CLK_LCDIF 8 > > +#define IMX7ULP_CLK_MMDC 9 > > +#define IMX7ULP_CLK_PCTLC 10 > > +#define IMX7ULP_CLK_PCTLD 11 > > +#define IMX7ULP_CLK_PCTLE 12 > > +#define IMX7ULP_CLK_PCTLF 13 > > +#define IMX7ULP_CLK_GPU3D 14 > > +#define IMX7ULP_CLK_GPU2D 15 > > + > > +#define IMX7ULP_CLK_PCC3_END 16 > > + > > +#endif /* __DT_BINDINGS_CLOCK_IMX7ULP_H */ > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt new file mode 100644 index 0000000..2239383 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt @@ -0,0 +1,87 @@ +* Clock bindings for Freescale i.MX7ULP + +i.MX7ULP Clock functions are under joint control of the System +Clock Generation (SCG) modules, Peripheral Clock Control (PCC) +modules, and Core Mode Controller (CMC)1 blocks + +The clocking scheme provides clear separation between M4 domain +and A7 domain. Except for a few clock sources shared between two +domains, such as the System Oscillator clock, the Slow IRC (SIRC), +and and the Fast IRC clock (FIRCLK), clock sources and clock +management are separated and contained within each domain. + +M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. +A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. + +Note: this binding doc is only for A7 clock domain. + +System Clock Generation (SCG) modules: +--------------------------------------------------------------------- +The System Clock Generation (SCG) is responsible for clock generation +and distribution across this device. Functions performed by the SCG +include: clock reference selection, generation of clock used to derive +processor, system, peripheral bus and external memory interface clocks, +source selection for peripheral clocks and control of power saving +clock gating mode. + +Required properties: + +- compatible: Should be "fsl,imx7ulp-scg1". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-name: Should contain the following clock names:"rosc", "sosc", + "sirc", "firc", "upll", "mpll". + +Peripheral Clock Control (PCC) modules: +--------------------------------------------------------------------- +The Peripheral Clock Control (PCC) is responsible for clock selection, +optional division and clock gating mode for peripherals in their +respected power domain + +Required properties: +- compatible: Should be "fsl,imx7ulp-pcc2" or "fsl,imx7ulp-pcc3". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See include/dt-bindings/clock/imx7ulp-clock.h +for the full list of i.MX7ULP clock IDs of each module. + +Examples: + +#include <dt-bindings/clock/imx7ulp-clock.h> + +scg1: scg1@403e0000 { + compatible = "fsl,imx7ulp-scg1; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; +}; + +pcc2: pcc2@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; +}; + +pcc3: pcc3@40b30000 { + compatible = "fsl,imx7ulp-pcc3"; + reg = <0x40b30000 0x10000>; + #clock-cells = <1>; +}; + +usdhc1: usdhc@40380000 { + compatible = "fsl,imx7ulp-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + bus-width = <4>; +}; diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h new file mode 100644 index 0000000..008c5ee --- /dev/null +++ b/include/dt-bindings/clock/imx7ulp-clock.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017~2018 NXP + * + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX7ULP_H +#define __DT_BINDINGS_CLOCK_IMX7ULP_H + +/* SCG1 */ + +#define IMX7ULP_CLK_DUMMY 0 +#define IMX7ULP_CLK_ROSC 1 +#define IMX7ULP_CLK_SOSC 2 +#define IMX7ULP_CLK_FIRC 3 +#define IMX7ULP_CLK_SPLL_PRE_SEL 4 +#define IMX7ULP_CLK_SPLL_PRE_DIV 5 +#define IMX7ULP_CLK_SPLL 6 +#define IMX7ULP_CLK_SPLL_POST_DIV1 7 +#define IMX7ULP_CLK_SPLL_POST_DIV2 8 +#define IMX7ULP_CLK_SPLL_PFD0 9 +#define IMX7ULP_CLK_SPLL_PFD1 10 +#define IMX7ULP_CLK_SPLL_PFD2 11 +#define IMX7ULP_CLK_SPLL_PFD3 12 +#define IMX7ULP_CLK_SPLL_PFD_SEL 13 +#define IMX7ULP_CLK_SPLL_SEL 14 +#define IMX7ULP_CLK_APLL_PRE_SEL 15 +#define IMX7ULP_CLK_APLL_PRE_DIV 16 +#define IMX7ULP_CLK_APLL 17 +#define IMX7ULP_CLK_APLL_POST_DIV1 18 +#define IMX7ULP_CLK_APLL_POST_DIV2 19 +#define IMX7ULP_CLK_APLL_PFD0 20 +#define IMX7ULP_CLK_APLL_PFD1 21 +#define IMX7ULP_CLK_APLL_PFD2 22 +#define IMX7ULP_CLK_APLL_PFD3 23 +#define IMX7ULP_CLK_APLL_PFD_SEL 24 +#define IMX7ULP_CLK_APLL_SEL 25 +#define IMX7ULP_CLK_UPLL 26 +#define IMX7ULP_CLK_SYS_SEL 27 +#define IMX7ULP_CLK_CORE_DIV 28 +#define IMX7ULP_CLK_BUS_DIV 29 +#define IMX7ULP_CLK_PLAT_DIV 30 +#define IMX7ULP_CLK_DDR_SEL 31 +#define IMX7ULP_CLK_DDR_DIV 32 +#define IMX7ULP_CLK_NIC_SEL 33 +#define IMX7ULP_CLK_NIC0_DIV 34 +#define IMX7ULP_CLK_GPU_DIV 35 +#define IMX7ULP_CLK_NIC1_DIV 36 +#define IMX7ULP_CLK_NIC1_BUS_DIV 37 +#define IMX7ULP_CLK_NIC1_EXT_DIV 38 +#define IMX7ULP_CLK_MIPI_PLL 39 +#define IMX7ULP_CLK_SIRC 40 +#define IMX7ULP_CLK_SOSC_BUS_CLK 41 +#define IMX7ULP_CLK_FIRC_BUS_CLK 42 +#define IMX7ULP_CLK_SPLL_BUS_CLK 43 + +#define IMX7ULP_CLK_SCG1_END 44 + +/* PCC2 */ +#define IMX7ULP_CLK_DMA1 0 +#define IMX7ULP_CLK_RGPIO2P1 1 +#define IMX7ULP_CLK_FLEXBUS 2 +#define IMX7ULP_CLK_SEMA42_1 3 +#define IMX7ULP_CLK_DMA_MUX1 4 +#define IMX7ULP_CLK_SNVS 5 +#define IMX7ULP_CLK_CAAM 6 +#define IMX7ULP_CLK_LPTPM4 7 +#define IMX7ULP_CLK_LPTPM5 8 +#define IMX7ULP_CLK_LPIT1 9 +#define IMX7ULP_CLK_LPSPI2 10 +#define IMX7ULP_CLK_LPSPI3 11 +#define IMX7ULP_CLK_LPI2C4 12 +#define IMX7ULP_CLK_LPI2C5 13 +#define IMX7ULP_CLK_LPUART4 14 +#define IMX7ULP_CLK_LPUART5 15 +#define IMX7ULP_CLK_FLEXIO1 16 +#define IMX7ULP_CLK_USB0 17 +#define IMX7ULP_CLK_USB1 18 +#define IMX7ULP_CLK_USB_PHY 19 +#define IMX7ULP_CLK_USB_PL301 20 +#define IMX7ULP_CLK_USDHC0 21 +#define IMX7ULP_CLK_USDHC1 22 +#define IMX7ULP_CLK_WDG1 23 +#define IMX7ULP_CLK_WDG2 24 + +#define IMX7ULP_CLK_PCC2_END 25 + +/* PCC3 */ +#define IMX7ULP_CLK_LPTPM6 0 +#define IMX7ULP_CLK_LPTPM7 1 +#define IMX7ULP_CLK_LPI2C6 2 +#define IMX7ULP_CLK_LPI2C7 3 +#define IMX7ULP_CLK_LPUART6 4 +#define IMX7ULP_CLK_LPUART7 5 +#define IMX7ULP_CLK_VIU 6 +#define IMX7ULP_CLK_DSI 7 +#define IMX7ULP_CLK_LCDIF 8 +#define IMX7ULP_CLK_MMDC 9 +#define IMX7ULP_CLK_PCTLC 10 +#define IMX7ULP_CLK_PCTLD 11 +#define IMX7ULP_CLK_PCTLE 12 +#define IMX7ULP_CLK_PCTLF 13 +#define IMX7ULP_CLK_GPU3D 14 +#define IMX7ULP_CLK_GPU2D 15 + +#define IMX7ULP_CLK_PCC3_END 16 + +#endif /* __DT_BINDINGS_CLOCK_IMX7ULP_H */
i.MX7ULP Clock functions are under joint control of the System Clock Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and Core Mode Controller (CMC)1 blocks Note IMX7ULP has two clock domains: M4 and A7. This binding doc is only for A7 clock domain. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: devicetree@vger.kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- ChangeLog: v3->v4: * make scg, pcc separate nodes according to Rob's suggestion v2->v3: * no changes v1->v2: no changes --- .../devicetree/bindings/clock/imx7ulp-clock.txt | 87 ++++++++++++++++ include/dt-bindings/clock/imx7ulp-clock.h | 109 +++++++++++++++++++++ 2 files changed, 196 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx7ulp-clock.txt create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h