diff mbox series

[RFC,v2,2/2] dt-bindings: mailbox: Add Xilinx IPI Mailbox

Message ID 1512368735-27147-3-git-send-email-jliang@xilinx.com
State Not Applicable, archived
Headers show
Series Xilinx ZynqMP IPI Mailbox Controller Driver | expand

Commit Message

Jiaying Liang Dec. 4, 2017, 6:25 a.m. UTC 
Xilinx ZynqMP IPI(Inter Processor Interrupt) is a hardware block
in ZynqMP SoC used for the communication between various processor
systems.

Signed-off-by: Wendy Liang <jliang@xilinx.com>
---
 .../bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt   | 104 +++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt

Comments

Rob Herring (Arm) Dec. 7, 2017, 10:14 p.m. UTC | #1 
On Sun, Dec 03, 2017 at 10:25:35PM -0800, Wendy Liang wrote:
> Xilinx ZynqMP IPI(Inter Processor Interrupt) is a hardware block
> in ZynqMP SoC used for the communication between various processor
> systems.
> 
> Signed-off-by: Wendy Liang <jliang@xilinx.com>
> ---
>  .../bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt   | 104 +++++++++++++++++++++
>  1 file changed, 104 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt

Reviewed-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
new file mode 100644
index 0000000..5e270a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
@@ -0,0 +1,104 @@ 
+Xilinx IPI Mailbox Controller
+========================================
+
+The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+agent owns registers used for notification and buffers for message.
+
+               +-------------------------------------+
+               | Xilinx ZynqMP IPI Controller        |
+               +-------------------------------------+
+    +--------------------------------------------------+
+ATF                    |                     |
+                       |                     |
+                       |                     |
+    +--------------------------+             |
+                       |                     |
+                       |                     |
+    +--------------------------------------------------+
+            +------------------------------------------+
+            |  +----------------+   +----------------+ |
+Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
+            |  |  Registers     |   |                | |
+            |  |                |   |                | |
+            |  +----------------+   +----------------+ |
+            |                                          |
+            | Xilinx IPI Agent Block                   |
+            +------------------------------------------+
+
+
+Controller Device Node:
+===========================
+Required properties:
+--------------------
+- compatible:		Shall be: "xlnx,zynqmp-ipi-mailbox"
+- reg:			IPI buffers address ranges
+- reg-names:		Names of the reg resources. It should have:
+			* local_request_region
+			  - IPI request msg buffer written by local and read
+			    by remote
+			* local_response_region
+			  - IPI response msg buffer written by local and read
+			    by remote
+			* remote_request_region
+			  - IPI request msg buffer written by remote and read
+			    by local
+			* remote_response_region
+			  - IPI response msg buffer written by remote and read
+			    by local
+- #mbox-cells:		Shall be 1. It contains:
+			* tx(0) or rx(1) channel
+- xlnx,ipi-ids:		Xilinx IPI agent IDs of the two peers of the
+			Xilinx IPI communication channel.
+- interrupt-parent:	Phandle for the interrupt controller
+- interrupts:		Interrupt information corresponding to the
+			interrupt-names property.
+
+Optional properties:
+--------------------
+- method:              The method of accessing the IPI agent registers.
+                       Permitted values are: "smc" and "hvc". Default is
+                       "smc".
+
+Example:
+===========================
+	/* APU<->RPU0 IPI mailbox controller */
+	ipi_mailbox_rpu0: mailbox@ff90400 {
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		reg = <0x0 0xff990400 0x0 0x20>,
+		      <0x0 0xff990420 0x0 0x20>,
+		      <0x0 0xff990080 0x0 0x20>,
+		      <0x0 0xff9900a0 0x0 0x20>;
+		reg-names = "local_request_region", "local_response_region",
+			    "remote_request_region", "remote_response_region";
+		#mbox-cells = <1>;
+		xlnx-ipi-ids = <0 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 29 4>;
+	};
+	/* APU<->RPU1 IPI mailbox controller */
+	ipi_mailbox_rpu1: mailbox@ff990440 {
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		reg = <0x0 0xff990440 0x0 0x20>,
+		      <0x0 0xff990460 0x0 0x20>,
+		      <0x0 0xff990280 0x0 0x20>,
+		      <0x0 0xff9902a0 0x0 0x20>;
+		reg-names = "local_request_region", "local_response_region",
+			    "remote_request_region", "remote_response_region";
+		#mbox-cells = <1>;
+		xlnx-ipi-ids = <0 2>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 29 4>;
+	};
+	rpu0 {
+		...
+		mboxes = <&ipi_mailbox_rpu0 0>,
+			 <&ipi_mailbox_rpu0 1>;
+		mbox-names = "tx", "rx";
+	};
+	rpu1 {
+		...
+		mboxes = <&ipi_mailbox_rpu1 0>,
+			 <&ipi_mailbox_rpu1 1>;
+		mbox-names = "tx", "rx";
+	};