| Message ID | 1509073651-23730-2-git-send-email-shawnguo@kernel.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add Combo PHY driver for HiSilicon STB SoCs | expand |
On Fri, Oct 27, 2017 at 11:07:30AM +0800, Shawn Guo wrote: > From: Jianguo Sun <sunjianguo1@huawei.com> > > It adds the device tree bindings for PCIE/SATA/USB3 combo PHY found on > HiSilicon STB SoCs. > > Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > .../bindings/phy/phy-hi3798cv200-combphy.txt | 57 ++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt > new file mode 100644 > index 000000000000..efb6cd5eae04 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt > @@ -0,0 +1,57 @@ > +HiSilicon STB PCIE/SATA/USB3 PHY Please add a reference to the parent node binding. With that, Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Oct 27, 2017 at 09:38:30AM -0500, Rob Herring wrote: > On Fri, Oct 27, 2017 at 11:07:30AM +0800, Shawn Guo wrote: > > From: Jianguo Sun <sunjianguo1@huawei.com> > > > > It adds the device tree bindings for PCIE/SATA/USB3 combo PHY found on > > HiSilicon STB SoCs. > > > > Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > --- > > .../bindings/phy/phy-hi3798cv200-combphy.txt | 57 ++++++++++++++++++++++ > > 1 file changed, 57 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt > > > > diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt > > new file mode 100644 > > index 000000000000..efb6cd5eae04 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt > > @@ -0,0 +1,57 @@ > > +HiSilicon STB PCIE/SATA/USB3 PHY > > Please add a reference to the parent node binding. > > With that, > > Acked-by: Rob Herring <robh@kernel.org> Just noticed that we do not have a bindings doc for the parent peripheral controller yet. I will add a new patch for that in v5. Shawn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt new file mode 100644 index 000000000000..efb6cd5eae04 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt @@ -0,0 +1,57 @@ +HiSilicon STB PCIE/SATA/USB3 PHY + +Required properties: +- compatible: Should be "hisilicon,hi3798cv200-combphy" +- reg: Should be the address space for COMBPHY configuration and state + registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and + PERI_COMBPHY0_STATE for COMBPHY0 Hi3798cv200 SoC. +- #phy-cells: Should be 1. The cell number is used to select the phy mode + as defined in <dt-bindings/phy/phy.h>. +- clocks: The phandle to clock provider and clock specifier pair. +- resets: The phandle to reset controller and reset specifier pair. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Optional properties: +- hisilicon,fixed-mode: If the phy device doesn't support mode select + but a fixed mode setting, the property should be present to specify + the particular mode. +- hisilicon,mode-select-bits: If the phy device support mode select, + this property should be present to specify the register bits in + peripheral controller, as a 3 integers tuple: + <register_offset bit_shift bit_mask>. + +Notes: +- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only + one of them should be present. +- The device node should be a child of peripheral controller that contains + COMBPHY configuration/state and PERI_CTRL register used to select PHY mode. + +Examples: + +perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", + "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + combphy0: phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY0_CLK>; + resets = <&crg 0x188 4>; + hisilicon,fixed-mode = <PHY_TYPE_USB3>; + }; + + combphy1: phy@858 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x858 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY1_CLK>; + resets = <&crg 0x188 12>; + hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>; + }; +};