| Message ID | 1468577391-5096-1-git-send-email-matthias.bgg@gmail.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Fri, Jul 15, 2016 at 12:09:51PM +0200, Matthias Brugger wrote: > This patch adds basic support for the Tronsmart orion r86 set-top-box. > > Signed-off-by: Matthias Brugger <mbrugger@suse.com> > --- > Changes since v2: > - gpio-keys cleanpup > - set sdmmc properties correctly > > Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3368-orion-r68-meta.dts | 385 +++++++++++++++++++++ > 3 files changed, 390 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
在 2016/7/15 18:09, Matthias Brugger 写道: > This patch adds basic support for the Tronsmart orion r86 set-top-box. > > Signed-off-by: Matthias Brugger <mbrugger@suse.com> > --- > Changes since v2: > - gpio-keys cleanpup > - set sdmmc properties correctly It seems there are two "cap-mmc-highspeed;" for emmc. > > Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3368-orion-r68-meta.dts | 385 +++++++++++++++++++++ > 3 files changed, 390 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt > index 715d960..1d5c65e0 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.txt > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt > @@ -110,3 +110,7 @@ Rockchip platforms device tree bindings > - Rockchip RK3399 evb: > Required root node properties: > - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; > + > +- Tronsmart Orion R68 Meta > + Required root node properties: > + - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 7037a16..87669f6 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -1,5 +1,6 @@ > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb > > diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts > new file mode 100644 > index 0000000..d5e1af5 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts > @@ -0,0 +1,385 @@ > +/* > + * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include <dt-bindings/input/input.h> > +#include "rk3368.dtsi" > + > +/ { > + model = "Rockchip Orion R68"; > + compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; > + > + chosen { > + stdout-path = "serial2:115200n8"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + pinctrl-0 = <&emmc_reset>; > + pinctrl-names = "default"; > + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > + }; > + > + ext_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "ext_gmac"; > + }; > + > + keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwr_key>; > + > + power { > + wakeup-source; > + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; > + label = "GPIO Power"; > + linux,code = <KEY_POWER>; > + }; > + }; > + > + leds: gpio-leds { > + compatible = "gpio-leds"; > + > + red { > + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; > + label = "orion:red:led"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_ctl>; > + default-state = "on"; > + }; > + > + blue { > + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > + label = "orion:blue:led"; > + pinctrl-names = "default"; > + pinctrl-0 = <&stby_pwren>; > + default-state = "off"; > + }; > + }; > + > + vcc_18: vcc18-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > + > + /* supplies both host and otg */ > + vcc_host: vcc-host-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&host_vbus_drv>; > + regulator-name = "vcc_host"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > + > + vccio_sd: vcc-io-sd-regulator { > + compatible = "regulator-fixed"; > + regulator-name= "vccio_sd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > + > + vcc_sd: vcc-sd-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sd"; > + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > + > + vcc_io: vcc-io-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_io"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc_lan: vcc-lan-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_lan"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > + > + vcc_sys: vcc-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vccio_wl: vccio-wl-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_wl"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_io>; > + }; > + > + vdd_10: vdd-10-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_10"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > +}; > + > +&emmc { > + bus-width = <8>; > + cap-mmc-highspeed; > + disable-wp; > + mmc-pwrseq = <&emmc_pwrseq>; > + non-removable; > + num-slots = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; > + keep-power-in-suspend; > + cap-mmc-highspeed; > + mmc-hs200-1_2v; > + mmc-hs200-1_8v; > + status = "okay"; > +}; > + > +&gmac { > + assigned-clocks = <&cru SCLK_MAC>; > + assigned-clock-parents = <&ext_gmac>; > + phy-supply = <&vcc_lan>; > + phy-mode = "rgmii"; > + clock_in_out = "input"; > + snps,reset-gpio = <&gpio3 12 0>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 1000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + tx_delay = <0x30>; > + rx_delay = <0x10>; > + status = "ok"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + vdd_cpu: syr827@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu"; > + regulator-enable-ramp-delay = <300>; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <8000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + }; > + > + hym8563: hym8563@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "xin32k"; > + /* rtc_int is not connected */ > + }; > +}; > + > +&pinctrl { > + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { > + bias-disable; > + drive-strength = <8>; > + }; > + > + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { > + bias-pull-up; > + drive-strength = <8>; > + }; > + > + emmc { > + emmc_bus8: emmc-bus8 { > + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, > + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; > + }; > + > + emmc-clk { > + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; > + }; > + > + emmc-cmd { > + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; > + }; > + > + emmc_reset: emmc-reset { > + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + keys { > + pwr_key: pwr-key { > + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + leds { > + stby_pwren: stby-pwren { > + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + led_ctl: led-ctl { > + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + sdmmc { > + sdmmc_clk: sdmmc-clk { > + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; > + }; > + > + sdmmc_cmd: sdmmc-cmd { > + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; > + }; > + > + sdmmc_cd: sdmmc-cd { > + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; > + }; > + > + sdmmc_bus1: sdmmc-bus1 { > + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; > + }; > + > + sdmmc_bus4: sdmmc-bus4 { > + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, > + <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, > + <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, > + <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; > + }; > + }; > + > + usb { > + host_vbus_drv: host-vbus-drv { > + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&saradc { > + vref-supply = <&vcc_18>; > + status = "okay"; > +}; > + > +&sdmmc { > + clock-frequency = <50000000>; > + clock-freq-min-max = <400000 50000000>; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; > + bus-width = <4>; > + num-slots = <1>; > + keep-power-in-suspend; > + > + vmmc-supply = <&vcc_sd>; > + vqmmc-supply = <&vccio_sd>; > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&uart4 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart4_xfer>; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_otg { > + status = "okay"; > +}; > + > +&wdt { > + status = "okay"; > +}; >
On 07/18/2016 03:13 AM, Shawn Lin wrote: > 在 2016/7/15 18:09, Matthias Brugger 写道: >> This patch adds basic support for the Tronsmart orion r86 set-top-box. >> >> Signed-off-by: Matthias Brugger <mbrugger@suse.com> >> --- >> Changes since v2: >> - gpio-keys cleanpup >> - set sdmmc properties correctly > > It seems there are two "cap-mmc-highspeed;" for emmc. > True, I will fix it in the next version. Thanks, Matthias >> >> Documentation/devicetree/bindings/arm/rockchip.txt | 4 + >> arch/arm64/boot/dts/rockchip/Makefile | 1 + >> .../boot/dts/rockchip/rk3368-orion-r68-meta.dts | 385 >> +++++++++++++++++++++ >> 3 files changed, 390 insertions(+) >> create mode 100644 >> arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt >> b/Documentation/devicetree/bindings/arm/rockchip.txt >> index 715d960..1d5c65e0 100644 >> --- a/Documentation/devicetree/bindings/arm/rockchip.txt >> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt >> @@ -110,3 +110,7 @@ Rockchip platforms device tree bindings >> - Rockchip RK3399 evb: >> Required root node properties: >> - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; >> + >> +- Tronsmart Orion R68 Meta >> + Required root node properties: >> + - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile >> b/arch/arm64/boot/dts/rockchip/Makefile >> index 7037a16..87669f6 100644 >> --- a/arch/arm64/boot/dts/rockchip/Makefile >> +++ b/arch/arm64/boot/dts/rockchip/Makefile >> @@ -1,5 +1,6 @@ >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb >> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts >> b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts >> new file mode 100644 >> index 0000000..d5e1af5 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts >> @@ -0,0 +1,385 @@ >> +/* >> + * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> the >> + * License, or (at your option) any later version. >> + * >> + * This file is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +/dts-v1/; >> +#include <dt-bindings/input/input.h> >> +#include "rk3368.dtsi" >> + >> +/ { >> + model = "Rockchip Orion R68"; >> + compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; >> + >> + chosen { >> + stdout-path = "serial2:115200n8"; >> + }; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x0 0x0 0x0 0x80000000>; >> + }; >> + >> + emmc_pwrseq: emmc-pwrseq { >> + compatible = "mmc-pwrseq-emmc"; >> + pinctrl-0 = <&emmc_reset>; >> + pinctrl-names = "default"; >> + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + ext_gmac: external-gmac-clock { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "ext_gmac"; >> + }; >> + >> + keys: gpio-keys { >> + compatible = "gpio-keys"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pwr_key>; >> + >> + power { >> + wakeup-source; >> + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; >> + label = "GPIO Power"; >> + linux,code = <KEY_POWER>; >> + }; >> + }; >> + >> + leds: gpio-leds { >> + compatible = "gpio-leds"; >> + >> + red { >> + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; >> + label = "orion:red:led"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&led_ctl>; >> + default-state = "on"; >> + }; >> + >> + blue { >> + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; >> + label = "orion:blue:led"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&stby_pwren>; >> + default-state = "off"; >> + }; >> + }; >> + >> + vcc_18: vcc18-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc_18"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_sys>; >> + }; >> + >> + /* supplies both host and otg */ >> + vcc_host: vcc-host-regulator { >> + compatible = "regulator-fixed"; >> + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&host_vbus_drv>; >> + regulator-name = "vcc_host"; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_sys>; >> + }; >> + >> + vccio_sd: vcc-io-sd-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name= "vccio_sd"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_io>; >> + }; >> + >> + vcc_sd: vcc-sd-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc_sd"; >> + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_io>; >> + }; >> + >> + vcc_io: vcc-io-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc_io"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_sys>; >> + }; >> + >> + vcc_lan: vcc-lan-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc_lan"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_io>; >> + }; >> + >> + vcc_sys: vcc-sys-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc_sys"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + vccio_wl: vccio-wl-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vccio_wl"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_io>; >> + }; >> + >> + vdd_10: vdd-10-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vdd_10"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_sys>; >> + }; >> +}; >> + >> +&emmc { >> + bus-width = <8>; >> + cap-mmc-highspeed; >> + disable-wp; >> + mmc-pwrseq = <&emmc_pwrseq>; >> + non-removable; >> + num-slots = <1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; >> + keep-power-in-suspend; >> + cap-mmc-highspeed; >> + mmc-hs200-1_2v; >> + mmc-hs200-1_8v; >> + status = "okay"; >> +}; >> + >> +&gmac { >> + assigned-clocks = <&cru SCLK_MAC>; >> + assigned-clock-parents = <&ext_gmac>; >> + phy-supply = <&vcc_lan>; >> + phy-mode = "rgmii"; >> + clock_in_out = "input"; >> + snps,reset-gpio = <&gpio3 12 0>; >> + snps,reset-active-low; >> + snps,reset-delays-us = <0 10000 1000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rgmii_pins>; >> + tx_delay = <0x30>; >> + rx_delay = <0x10>; >> + status = "ok"; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> + >> + vdd_cpu: syr827@40 { >> + compatible = "silergy,syr827"; >> + reg = <0x40>; >> + fcs,suspend-voltage-selector = <1>; >> + regulator-name = "vdd_cpu"; >> + regulator-enable-ramp-delay = <300>; >> + regulator-min-microvolt = <712500>; >> + regulator-max-microvolt = <1500000>; >> + regulator-ramp-delay = <8000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc_sys>; >> + }; >> + >> + hym8563: hym8563@51 { >> + compatible = "haoyu,hym8563"; >> + reg = <0x51>; >> + #clock-cells = <0>; >> + clock-frequency = <32768>; >> + clock-output-names = "xin32k"; >> + /* rtc_int is not connected */ >> + }; >> +}; >> + >> +&pinctrl { >> + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { >> + bias-disable; >> + drive-strength = <8>; >> + }; >> + >> + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { >> + bias-pull-up; >> + drive-strength = <8>; >> + }; >> + >> + emmc { >> + emmc_bus8: emmc-bus8 { >> + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, >> + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; >> + }; >> + >> + emmc-clk { >> + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; >> + }; >> + >> + emmc-cmd { >> + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; >> + }; >> + >> + emmc_reset: emmc-reset { >> + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + keys { >> + pwr_key: pwr-key { >> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; >> + }; >> + }; >> + >> + leds { >> + stby_pwren: stby-pwren { >> + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + led_ctl: led-ctl { >> + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + sdmmc { >> + sdmmc_clk: sdmmc-clk { >> + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; >> + }; >> + >> + sdmmc_cmd: sdmmc-cmd { >> + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; >> + }; >> + >> + sdmmc_cd: sdmmc-cd { >> + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; >> + }; >> + >> + sdmmc_bus1: sdmmc-bus1 { >> + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; >> + }; >> + >> + sdmmc_bus4: sdmmc-bus4 { >> + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, >> + <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, >> + <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, >> + <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; >> + }; >> + }; >> + >> + usb { >> + host_vbus_drv: host-vbus-drv { >> + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> +}; >> + >> +&saradc { >> + vref-supply = <&vcc_18>; >> + status = "okay"; >> +}; >> + >> +&sdmmc { >> + clock-frequency = <50000000>; >> + clock-freq-min-max = <400000 50000000>; >> + cap-sd-highspeed; >> + card-detect-delay = <200>; >> + >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; >> + bus-width = <4>; >> + num-slots = <1>; >> + keep-power-in-suspend; >> + >> + vmmc-supply = <&vcc_sd>; >> + vqmmc-supply = <&vccio_sd>; >> + status = "okay"; >> +}; >> + >> +&uart2 { >> + status = "okay"; >> +}; >> + >> +&uart4 { >> + status = "okay"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart4_xfer>; >> +}; >> + >> +&usb_host0_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_otg { >> + status = "okay"; >> +}; >> + >> +&wdt { >> + status = "okay"; >> +}; >> > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Freitag, 15. Juli 2016, 12:09:51 schrieb Matthias Brugger: > This patch adds basic support for the Tronsmart orion r86 set-top-box. > > Signed-off-by: Matthias Brugger <mbrugger@suse.com> applied [0] with Rob's Ack. I've removed the duplicate mmc cap and also reordered properties to be alphabetically sorted, please double check. While it is in my 4.8 dts branch, this will only make it into 4.9 though. Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 715d960..1d5c65e0 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -110,3 +110,7 @@ Rockchip platforms device tree bindings - Rockchip RK3399 evb: Required root node properties: - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; + +- Tronsmart Orion R68 Meta + Required root node properties: + - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 7037a16..87669f6 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts new file mode 100644 index 0000000..d5e1af5 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -0,0 +1,385 @@ +/* + * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3368.dtsi" + +/ { + model = "Rockchip Orion R68"; + compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + wakeup-source; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + red { + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + label = "orion:red:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + default-state = "on"; + }; + + blue { + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + label = "orion:blue:led"; + pinctrl-names = "default"; + pinctrl-0 = <&stby_pwren>; + default-state = "off"; + }; + }; + + vcc_18: vcc18-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + /* supplies both host and otg */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vccio_sd: vcc-io-sd-regulator { + compatible = "regulator-fixed"; + regulator-name= "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sd: vcc-sd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd"; + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vccio_wl: vccio-wl-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_wl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vdd_10: vdd-10-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + keep-power-in-suspend; + cap-mmc-highspeed; + mmc-hs200-1_2v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio3 12 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <8000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + /* rtc_int is not connected */ + }; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_reset: emmc-reset { + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + stby_pwren: stby-pwren { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_ctl: led-ctl { + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdmmc { + clock-frequency = <50000000>; + clock-freq-min-max = <400000 50000000>; + cap-sd-highspeed; + card-detect-delay = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + bus-width = <4>; + num-slots = <1>; + keep-power-in-suspend; + + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +};
This patch adds basic support for the Tronsmart orion r86 set-top-box. Signed-off-by: Matthias Brugger <mbrugger@suse.com> --- Changes since v2: - gpio-keys cleanpup - set sdmmc properties correctly Documentation/devicetree/bindings/arm/rockchip.txt | 4 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3368-orion-r68-meta.dts | 385 +++++++++++++++++++++ 3 files changed, 390 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts