diff mbox

[2/2] crypto: s5p-sss - Remove useless hash interrupt handler

Message ID 1461073452-10426-2-git-send-email-k.kozlowski@samsung.com
State Rejected, archived
Headers show

Commit Message

Krzysztof Kozlowski April 19, 2016, 1:44 p.m. UTC 
Beside regular feed control interrupt, the driver requires also hash
interrupt for older SoCs (samsung,s5pv210-secss). However after
requesting it, the interrupt handler isn't doing anything with it, not
even clearing the hash interrupt bit.

Driver does not provide hash functions so it is safe to remove the hash
interrupt related code and to not require the interrupt in Device Tree.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 .../devicetree/bindings/crypto/samsung-sss.txt     |  6 ++--
 drivers/crypto/s5p-sss.c                           | 34 ++++------------------
 2 files changed, 8 insertions(+), 32 deletions(-)

Comments

Vladimir Zapolskiy April 20, 2016, 10:04 a.m. UTC | #1 
On 19.04.2016 16:44, Krzysztof Kozlowski wrote:
> Beside regular feed control interrupt, the driver requires also hash
> interrupt for older SoCs (samsung,s5pv210-secss). However after
> requesting it, the interrupt handler isn't doing anything with it, not
> even clearing the hash interrupt bit.
> 
> Driver does not provide hash functions so it is safe to remove the hash
> interrupt related code and to not require the interrupt in Device Tree.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Thank you for the change.

Acked-by: Vladimir Zapolskiy <vz@mleia.com>

> ---
>  .../devicetree/bindings/crypto/samsung-sss.txt     |  6 ++--
>  drivers/crypto/s5p-sss.c                           | 34 ++++------------------
>  2 files changed, 8 insertions(+), 32 deletions(-)
> 

---
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring (Arm) April 21, 2016, 3:24 p.m. UTC | #2 
On Tue, Apr 19, 2016 at 03:44:12PM +0200, Krzysztof Kozlowski wrote:
> Beside regular feed control interrupt, the driver requires also hash
> interrupt for older SoCs (samsung,s5pv210-secss). However after
> requesting it, the interrupt handler isn't doing anything with it, not
> even clearing the hash interrupt bit.
> 
> Driver does not provide hash functions so it is safe to remove the hash
> interrupt related code and to not require the interrupt in Device Tree.

NAK for the DT change. If the h/w has a 2nd interrupt, then it should be 
defined. Whether the driver uses it or not is a driver problem.

Rob

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.txt b/Documentation/devicetree/bindings/crypto/samsung-sss.txt
index a6dafa83c6df..7a5ca56683cc 100644
--- a/Documentation/devicetree/bindings/crypto/samsung-sss.txt
+++ b/Documentation/devicetree/bindings/crypto/samsung-sss.txt
@@ -23,10 +23,8 @@  Required properties:
   - "samsung,exynos4210-secss" for Exynos4210, Exynos4212, Exynos4412, Exynos5250,
 		Exynos5260 and Exynos5420 SoCs.
 - reg : Offset and length of the register set for the module
-- interrupts : interrupt specifiers of SSS module interrupts, should contain
-		following entries:
-		- first : feed control interrupt (required for all variants),
-		- second : hash interrupt (required only for samsung,s5pv210-secss).
+- interrupts : interrupt specifiers of SSS module interrupts (one feed
+		control interrupt).
 
 - clocks : list of clock phandle and specifier pairs for all clocks  listed in
 		clock-names property.
diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index b0484d4d68d9..71ca6a5d636d 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -149,7 +149,6 @@ 
 
 /**
  * struct samsung_aes_variant - platform specific SSS driver data
- * @has_hash_irq: true if SSS module uses hash interrupt, false otherwise
  * @aes_offset: AES register offset from SSS module's base.
  *
  * Specifies platform specific configuration of SSS module.
@@ -157,7 +156,6 @@ 
  * expansion of its usage.
  */
 struct samsung_aes_variant {
-	bool			    has_hash_irq;
 	unsigned int		    aes_offset;
 };
 
@@ -178,7 +176,6 @@  struct s5p_aes_dev {
 	struct clk                 *clk;
 	void __iomem               *ioaddr;
 	void __iomem               *aes_ioaddr;
-	int                         irq_hash;
 	int                         irq_fc;
 
 	struct ablkcipher_request  *req;
@@ -201,12 +198,10 @@  struct s5p_aes_dev {
 static struct s5p_aes_dev *s5p_dev;
 
 static const struct samsung_aes_variant s5p_aes_data = {
-	.has_hash_irq	= true,
 	.aes_offset	= 0x4000,
 };
 
 static const struct samsung_aes_variant exynos_aes_data = {
-	.has_hash_irq	= false,
 	.aes_offset	= 0x200,
 };
 
@@ -421,15 +416,13 @@  static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
 
 	spin_lock_irqsave(&dev->lock, flags);
 
-	if (irq == dev->irq_fc) {
-		status = SSS_READ(dev, FCINTSTAT);
-		if (status & SSS_FCINTSTAT_BRDMAINT)
-			s5p_aes_rx(dev);
-		if (status & SSS_FCINTSTAT_BTDMAINT)
-			s5p_aes_tx(dev);
+	status = SSS_READ(dev, FCINTSTAT);
+	if (status & SSS_FCINTSTAT_BRDMAINT)
+		s5p_aes_rx(dev);
+	if (status & SSS_FCINTSTAT_BTDMAINT)
+		s5p_aes_tx(dev);
 
-		SSS_WRITE(dev, FCINTPEND, status);
-	}
+	SSS_WRITE(dev, FCINTPEND, status);
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -795,21 +788,6 @@  static int s5p_aes_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
-	if (variant->has_hash_irq) {
-		pdata->irq_hash = platform_get_irq(pdev, 1);
-		if (pdata->irq_hash < 0) {
-			err = pdata->irq_hash;
-			dev_warn(dev, "hash interrupt is not available.\n");
-			goto err_irq;
-		}
-		err = devm_request_irq(dev, pdata->irq_hash, s5p_aes_interrupt,
-				       IRQF_SHARED, pdev->name, pdev);
-		if (err < 0) {
-			dev_warn(dev, "hash interrupt is not available.\n");
-			goto err_irq;
-		}
-	}
-
 	pdata->busy = false;
 	pdata->variant = variant;
 	pdata->dev = dev;