| Message ID | 1452478400-4267-1-git-send-email-horms+renesas@verge.net.au |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Jan 11, 2016 at 11:13:20AM +0900, Simon Horman wrote: > Add fallback compatibility string. > This is in keeping with the fallback scheme being adopted wherever > appropriate for drivers for Renesas SoCs. > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > > --- > v2 > * Make fallback compat string for R-Car Gen2 rather than all renesas > hardware: that seems too generic > --- > Documentation/devicetree/bindings/media/renesas,jpu.txt | 13 +++++++------ > drivers/media/platform/rcar_jpu.c | 1 + > 2 files changed, 8 insertions(+), 6 deletions(-) Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.txt b/Documentation/devicetree/bindings/media/renesas,jpu.txt index 0cb94201bf92..d3436e5190f9 100644 --- a/Documentation/devicetree/bindings/media/renesas,jpu.txt +++ b/Documentation/devicetree/bindings/media/renesas,jpu.txt @@ -5,11 +5,12 @@ and decoding function conforming to the JPEG baseline process, so that the JPU can encode image data and decode JPEG data quickly. Required properties: - - compatible: should containg one of the following: - - "renesas,jpu-r8a7790" for R-Car H2 - - "renesas,jpu-r8a7791" for R-Car M2-W - - "renesas,jpu-r8a7792" for R-Car V2H - - "renesas,jpu-r8a7793" for R-Car M2-N +- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback. + Examples with soctypes are: + - "renesas,jpu-r8a7790" for R-Car H2 + - "renesas,jpu-r8a7791" for R-Car M2-W + - "renesas,jpu-r8a7792" for R-Car V2H + - "renesas,jpu-r8a7793" for R-Car M2-N - reg: Base address and length of the registers block for the JPU. - interrupts: JPU interrupt specifier. @@ -17,7 +18,7 @@ Required properties: Example: R8A7790 (R-Car H2) JPU node jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7790"; + compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; diff --git a/drivers/media/platform/rcar_jpu.c b/drivers/media/platform/rcar_jpu.c index f8e3e83c52a2..4caae52d9864 100644 --- a/drivers/media/platform/rcar_jpu.c +++ b/drivers/media/platform/rcar_jpu.c @@ -1611,6 +1611,7 @@ static const struct of_device_id jpu_dt_ids[] = { { .compatible = "renesas,jpu-r8a7791" }, /* M2-W */ { .compatible = "renesas,jpu-r8a7792" }, /* V2H */ { .compatible = "renesas,jpu-r8a7793" }, /* M2-N */ + { .compatible = "renesas,rcar-gen2-jpu" }, { }, }; MODULE_DEVICE_TABLE(of, jpu_dt_ids);
Add fallback compatibility string. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- v2 * Make fallback compat string for R-Car Gen2 rather than all renesas hardware: that seems too generic --- Documentation/devicetree/bindings/media/renesas,jpu.txt | 13 +++++++------ drivers/media/platform/rcar_jpu.c | 1 + 2 files changed, 8 insertions(+), 6 deletions(-)