Message ID | 1447584528-12411-1-git-send-email-michael@amarulasolutions.com |
---|---|
State | Accepted, archived |
Headers | show |
On Sun, Nov 15, 2015 at 11:48:48AM +0100, Michael Trimarchi wrote: > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Applied, thanks. Rob > --- > Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt > index 52493b1..c1a0a91 100644 > --- a/Documentation/devicetree/bindings/usb/usb3503.txt > +++ b/Documentation/devicetree/bindings/usb/usb3503.txt > @@ -18,7 +18,8 @@ Optional properties: > - refclk: Clock used for driving REFCLK signal (optional, if not provided > the driver assumes that clock signal is always available, its > rate is specified by REF_SEL pins and a value from the primary > - reference clock frequencies table is used) > + reference clock frequencies table is used). Use clocks and > + clock-names in order to assign it > - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL > pins (optional, if not provided, driver will not set rate of the > REFCLK signal and assume that a value from the primary reference > @@ -33,4 +34,6 @@ Examples: > intn-gpios = <&gpx3 4 1>; > reset-gpios = <&gpx3 5 1>; > initial-mode = <1>; > + clocks = <&clks 80>; > + clock-names = "refclk"; > }; > -- > 2.6.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 52493b1..c1a0a91 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -18,7 +18,8 @@ Optional properties: - refclk: Clock used for driving REFCLK signal (optional, if not provided the driver assumes that clock signal is always available, its rate is specified by REF_SEL pins and a value from the primary - reference clock frequencies table is used) + reference clock frequencies table is used). Use clocks and + clock-names in order to assign it - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL pins (optional, if not provided, driver will not set rate of the REFCLK signal and assume that a value from the primary reference @@ -33,4 +34,6 @@ Examples: intn-gpios = <&gpx3 4 1>; reset-gpios = <&gpx3 5 1>; initial-mode = <1>; + clocks = <&clks 80>; + clock-names = "refclk"; };
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)