Message ID | 1444700338-27582-6-git-send-email-fcooper@ti.com |
---|---|
State | Under Review, archived |
Headers | show |
On 13/10/15 04:38, Franklin S Cooper Jr wrote: > Add additional details to the gpmc and nand documentation to clarify > what is needed to enable nand dma prefetch. > > Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> > --- > Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt | 7 ++++++- > Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 ++ > 2 files changed, 8 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt > index 704be93..b1e2802 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt > +++ b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt > @@ -33,6 +33,10 @@ Required properties: > As this will change in the future, filling correct > values here is a requirement. > > +GPMC DMA information. Required only when GPMC nand prefetch is enabled. > + - dmas GPMC nand prefetch dma channel s/nand/NAND > + - dma-names DMA channel name use as a reference within the Nand driver s/Nand/NAND This is inevitably going to be "rxtx". So why not say that it should be "rxtx" Should these bindings go in bindings/mtd/gpmc-nand.txt instead? > + > Timing properties for child nodes. All are optional and default to 0. > > - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds > @@ -119,7 +123,8 @@ Example for an AM33xx board: > ti,hwmods = "gpmc"; > reg = <0x50000000 0x2000>; > interrupts = <100>; > - > + dmas = <&edma 52>; > + dma-names = "rxtx"; Why not define these in the NAND node instead of gpmc node? > gpmc,num-cs = <8>; > gpmc,num-waitpins = <2>; > #address-cells = <2>; > diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt > index 253e6de..4b0c240 100644 > --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt > +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt > @@ -61,6 +61,8 @@ Example for an AM33xx board: > ti,hwmods = "gpmc"; > reg = <0x50000000 0x36c>; > interrupts = <100>; > + dmas = <&edma 52>; > + dma-names = "rxtx"; > gpmc,num-cs = <8>; > gpmc,num-waitpins = <2>; > #address-cells = <2>; > cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/14/2015 06:50 AM, Roger Quadros wrote: > On 13/10/15 04:38, Franklin S Cooper Jr wrote: >> Add additional details to the gpmc and nand documentation to clarify >> what is needed to enable nand dma prefetch. >> >> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> >> --- >> Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt | 7 ++++++- >> Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 ++ >> 2 files changed, 8 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt >> index 704be93..b1e2802 100644 >> --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt >> +++ b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt >> @@ -33,6 +33,10 @@ Required properties: >> As this will change in the future, filling correct >> values here is a requirement. >> >> +GPMC DMA information. Required only when GPMC nand prefetch is enabled. >> + - dmas GPMC nand prefetch dma channel > s/nand/NAND > >> + - dma-names DMA channel name use as a reference within the Nand driver > s/Nand/NAND > > This is inevitably going to be "rxtx". So why not say that it should be "rxtx" I'll fix all three of these > > Should these bindings go in bindings/mtd/gpmc-nand.txt instead? > >> + >> Timing properties for child nodes. All are optional and default to 0. >> >> - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds >> @@ -119,7 +123,8 @@ Example for an AM33xx board: >> ti,hwmods = "gpmc"; >> reg = <0x50000000 0x2000>; >> interrupts = <100>; >> - >> + dmas = <&edma 52>; >> + dma-names = "rxtx"; > Why not define these in the NAND node instead of gpmc node? Since we decided that the dma entry will stay in the GPMC node I'll leave these as is. > >> gpmc,num-cs = <8>; >> gpmc,num-waitpins = <2>; >> #address-cells = <2>; >> diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt >> index 253e6de..4b0c240 100644 >> --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt >> +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt >> @@ -61,6 +61,8 @@ Example for an AM33xx board: >> ti,hwmods = "gpmc"; >> reg = <0x50000000 0x36c>; >> interrupts = <100>; >> + dmas = <&edma 52>; >> + dma-names = "rxtx"; >> gpmc,num-cs = <8>; >> gpmc,num-waitpins = <2>; >> #address-cells = <2>; >> > cheers, > -roger -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt index 704be93..b1e2802 100644 --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt @@ -33,6 +33,10 @@ Required properties: As this will change in the future, filling correct values here is a requirement. +GPMC DMA information. Required only when GPMC nand prefetch is enabled. + - dmas GPMC nand prefetch dma channel + - dma-names DMA channel name use as a reference within the Nand driver + Timing properties for child nodes. All are optional and default to 0. - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds @@ -119,7 +123,8 @@ Example for an AM33xx board: ti,hwmods = "gpmc"; reg = <0x50000000 0x2000>; interrupts = <100>; - + dmas = <&edma 52>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 253e6de..4b0c240 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -61,6 +61,8 @@ Example for an AM33xx board: ti,hwmods = "gpmc"; reg = <0x50000000 0x36c>; interrupts = <100>; + dmas = <&edma 52>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>;
Add additional details to the gpmc and nand documentation to clarify what is needed to enable nand dma prefetch. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> --- Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt | 7 ++++++- Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 ++ 2 files changed, 8 insertions(+), 1 deletion(-)