| Message ID | 1443602873-4316-2-git-send-email-yoshihiro.shimoda.uh@renesas.com |
|---|---|
| State | Under Review, archived |
| Headers | show |
On Wed, Sep 30, 2015 at 05:47:52PM +0900, Yoshihiro Shimoda wrote: > Add binding document for Renesas PWM Timer on R-Car SoCs. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > .../devicetree/bindings/pwm/renesas,pwm-rcar.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt Applied, thanks. Thierry
On Wed, Sep 30, 2015 at 3:47 AM, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> wrote: > Add binding document for Renesas PWM Timer on R-Car SoCs. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > .../devicetree/bindings/pwm/renesas,pwm-rcar.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > > diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > new file mode 100644 > index 0000000..ea0a27b > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > @@ -0,0 +1,27 @@ > +* Renesas R-Car PWM Timer Controller > + > +Required Properties: > +- compatible: should be one of the following. > + - "renesas,pwm-rcar": for generic R-Car compatible PWM Timer Should be this one and one of the following? That is what the example shows. > + - "renesas,pwm-r8a7778": for R-Car M1A > + - "renesas,pwm-r8a7779": for R-Car H1 > + - "renesas,pwm-r8a7790": for R-Car H2 > + - "renesas,pwm-r8a7791": for R-Car M2-W > + - "renesas,pwm-r8a7794": for R-Car E2 > +- reg: base address and length of the registers block for the PWM. > +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of > + the cells format. > +- clocks: clock phandle and specifier pair. > +- pinctrl-0: phandle, referring to a default pin configuration node. > +- pinctrl-names: Set to "default". > + > +Example: R8A7790 (R-Car H2) PWM Timer node > + > + pwm0: pwm@e6e30000 { > + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; > + reg = <0 0xe6e30000 0 0x8>; > + #pwm-cells = <2>; > + clocks = <&mstp5_clks R8A7790_CLK_PWM>; > + pinctrl-0 = <&pwm0_pins>; > + pinctrl-names = "default"; > + }; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, > Sent: Tuesday, October 06, 2015 12:39 AM > > On Wed, Sep 30, 2015 at 3:47 AM, Yoshihiro Shimoda > <yoshihiro.shimoda.uh@renesas.com> wrote: > > Add binding document for Renesas PWM Timer on R-Car SoCs. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > > --- > > .../devicetree/bindings/pwm/renesas,pwm-rcar.txt | 27 ++++++++++++++++++++++ > > 1 file changed, 27 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > > > > diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > > new file mode 100644 > > index 0000000..ea0a27b > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt > > @@ -0,0 +1,27 @@ > > +* Renesas R-Car PWM Timer Controller > > + > > +Required Properties: > > +- compatible: should be one of the following. > > + - "renesas,pwm-rcar": for generic R-Car compatible PWM Timer > > Should be this one and one of the following? That is what the example shows. Thank you for the point. Since this patch is already merged in linux-pwm repository, I will submit a new patch to revise it. Best regards, Yoshihiro Shimoda > > + - "renesas,pwm-r8a7778": for R-Car M1A > > + - "renesas,pwm-r8a7779": for R-Car H1 > > + - "renesas,pwm-r8a7790": for R-Car H2 > > + - "renesas,pwm-r8a7791": for R-Car M2-W > > + - "renesas,pwm-r8a7794": for R-Car E2 > > +- reg: base address and length of the registers block for the PWM. > > +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of > > + the cells format. > > +- clocks: clock phandle and specifier pair. > > +- pinctrl-0: phandle, referring to a default pin configuration node. > > +- pinctrl-names: Set to "default". > > + > > +Example: R8A7790 (R-Car H2) PWM Timer node > > + > > + pwm0: pwm@e6e30000 { > > + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; > > + reg = <0 0xe6e30000 0 0x8>; > > + #pwm-cells = <2>; > > + clocks = <&mstp5_clks R8A7790_CLK_PWM>; > > + pinctrl-0 = <&pwm0_pins>; > > + pinctrl-names = "default"; > > + }; > > -- > > 1.9.1 > >
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt new file mode 100644 index 0000000..ea0a27b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -0,0 +1,27 @@ +* Renesas R-Car PWM Timer Controller + +Required Properties: +- compatible: should be one of the following. + - "renesas,pwm-rcar": for generic R-Car compatible PWM Timer + - "renesas,pwm-r8a7778": for R-Car M1A + - "renesas,pwm-r8a7779": for R-Car H1 + - "renesas,pwm-r8a7790": for R-Car H2 + - "renesas,pwm-r8a7791": for R-Car M2-W + - "renesas,pwm-r8a7794": for R-Car E2 +- reg: base address and length of the registers block for the PWM. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. +- clocks: clock phandle and specifier pair. +- pinctrl-0: phandle, referring to a default pin configuration node. +- pinctrl-names: Set to "default". + +Example: R8A7790 (R-Car H2) PWM Timer node + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&mstp5_clks R8A7790_CLK_PWM>; + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + };