diff mbox

Altera Modular ADC driver device tree binding

Message ID 1440056795-6190-1-git-send-email-cnphoon@altera.com
State New, archived
Headers show

Commit Message

Chee Nouk Phoo Aug. 20, 2015, 7:46 a.m. UTC
From: Chee Nouk Phoon <cnphoon@altera.com>

Altera Modular ADC is soft IP that wraps the hardened ADC block in a Max1
device. It can be configured to dual ADC mode that supports two channel
synchronous sampling or independent single ADCs. ADC sampled values will be
written into memory slots in sequence determined by a user configurable
sequencer block.

This patch adds device tree binding for Altera Modular ADC driver

Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com>
---
 .../bindings/iio/adc/altr,modular-adc.txt          |   63 ++++++++++++++++++++
 1 files changed, 63 insertions(+), 0 deletions(-)
 create mode 100755 Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt

Comments

Lars-Peter Clausen Aug. 20, 2015, 3:54 p.m. UTC | #1
On 08/20/2015 09:46 AM, Chee Nouk Phoo wrote:
> From: Chee Nouk Phoon <cnphoon@altera.com>
> 
> Altera Modular ADC is soft IP that wraps the hardened ADC block in a Max1
> device. It can be configured to dual ADC mode that supports two channel
> synchronous sampling or independent single ADCs. ADC sampled values will be
> written into memory slots in sequence determined by a user configurable
> sequencer block.
> 
> This patch adds device tree binding for Altera Modular ADC driver

Is there also a driver for the device? Would be nice to see some of the DT
properties in context.

[...]
> +- altr,adc-slot-count : specify number of conversion slot in use
> +
> +- altr,adc<ADC index>-slot-sequence-<slot index>: specify ADC channel 
> +  conversion sequence
> +  <ADC index>: instantiated ADC number
> +  <slot index>: slot index for ADC memory slot
> +

These attributes for example sound like a software rather than a hardware
configuration.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Aug. 31, 2015, 5:28 p.m. UTC | #2
On 20/08/15 08:46, Chee Nouk Phoo wrote:
> From: Chee Nouk Phoon <cnphoon@altera.com>
> 
> Altera Modular ADC is soft IP that wraps the hardened ADC block in a Max1
> device. It can be configured to dual ADC mode that supports two channel
> synchronous sampling or independent single ADCs. ADC sampled values will be
> written into memory slots in sequence determined by a user configurable
> sequencer block.
> 
> This patch adds device tree binding for Altera Modular ADC driver
> 
> Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com>
> ---
>  .../bindings/iio/adc/altr,modular-adc.txt          |   63 ++++++++++++++++++++
>  1 files changed, 63 insertions(+), 0 deletions(-)
>  create mode 100755 Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt b/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
> new file mode 100755
> index 0000000..4106cb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
> @@ -0,0 +1,63 @@
> +Altera Modular (Dual) ADC
> +
> +This binding document describes both Altera Modular ADC and Altera Modular Dual
> +ADC. Both options can be configured during generation time in Qsys. This driver
> +only support standard sequencer with Avalon-MM sample storage with up to 64
> +memory slots.
> +
> +Required properties:
> +- compatible: must be one of the following strings
> +  "altr,modular-adc": single ADC configuration
> +  "altr,modular-dual-adc": dual ADC configuration
> +
> +- reg: Address and length of the register set for the device. It contains the
> +  information of registers in the same order as described by reg-names
> +
> +- reg-names: Should contain the reg names
> +  "sequencer_csr": register region for adc sequencer block
> +  "sample_store_csr": register region for sample store block
> +
> +- interrupts: interrupt line for ADC
> +
> +- altr,adc-mode : ADC configuration
> +  1: single ADC mode
> +  2: dual ADC mode
> +
> +- altr,adc-slot-count : specify number of conversion slot in use
> +
> +- altr,adc<ADC index>-slot-sequence-<slot index>: specify ADC channel 
> +  conversion sequence
> +  <ADC index>: instantiated ADC number
> +  <slot index>: slot index for ADC memory slot
> +
> +- altr,adc-number : specify ADC number when single ADC mode is selected
> +  1: 1st ADC
> +  2: 2nd ACD
> +
> +Example: single ADC
> +modular_adc_0: adc@0x20000200 {
> +  compatible = "altr,modular-adc";
> +  reg = <0x20000000 0x00000008>,
> +    <0x20000200 0x00000200>;
> +  reg-names = "sequencer_csr", "sample_store_csr";
> +  interrupt-parent = <&cpu>;
> +  interrupts = <8>;
> +  altr,adc-mode = <1>;
> +  altr,adc-slot-count = <2>;
> +  altr,adc1-slot-sequence-1 = <1>;
> +  altr,adc-number = <1>;
> +};
> +
> +Example: dual ADC
> +modular_adc_1: adc@0x18002200 {
> +  compatible = "altr,modular-dual-adc";
> +  reg = <0x18002000 0x00000008>,
> +    <0x18002200 0x00000200>;
> +  reg-names = "sequencer_csr", "sample_store_csr";
> +  interrupt-parent = <&cpu>;
> +  interrupts = <8>;
> +  altr,adc-mode = <2>;
> +  altr,adc-slot-count = <1>;
> +  altr,adc1-slot-sequence-1 = <6>;
> +  altr,adc2-slot-sequence-1 = <6>;
> +};
> \ No newline at end of file
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt b/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
new file mode 100755
index 0000000..4106cb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
@@ -0,0 +1,63 @@ 
+Altera Modular (Dual) ADC
+
+This binding document describes both Altera Modular ADC and Altera Modular Dual
+ADC. Both options can be configured during generation time in Qsys. This driver
+only support standard sequencer with Avalon-MM sample storage with up to 64
+memory slots.
+
+Required properties:
+- compatible: must be one of the following strings
+  "altr,modular-adc": single ADC configuration
+  "altr,modular-dual-adc": dual ADC configuration
+
+- reg: Address and length of the register set for the device. It contains the
+  information of registers in the same order as described by reg-names
+
+- reg-names: Should contain the reg names
+  "sequencer_csr": register region for adc sequencer block
+  "sample_store_csr": register region for sample store block
+
+- interrupts: interrupt line for ADC
+
+- altr,adc-mode : ADC configuration
+  1: single ADC mode
+  2: dual ADC mode
+
+- altr,adc-slot-count : specify number of conversion slot in use
+
+- altr,adc<ADC index>-slot-sequence-<slot index>: specify ADC channel 
+  conversion sequence
+  <ADC index>: instantiated ADC number
+  <slot index>: slot index for ADC memory slot
+
+- altr,adc-number : specify ADC number when single ADC mode is selected
+  1: 1st ADC
+  2: 2nd ACD
+
+Example: single ADC
+modular_adc_0: adc@0x20000200 {
+  compatible = "altr,modular-adc";
+  reg = <0x20000000 0x00000008>,
+    <0x20000200 0x00000200>;
+  reg-names = "sequencer_csr", "sample_store_csr";
+  interrupt-parent = <&cpu>;
+  interrupts = <8>;
+  altr,adc-mode = <1>;
+  altr,adc-slot-count = <2>;
+  altr,adc1-slot-sequence-1 = <1>;
+  altr,adc-number = <1>;
+};
+
+Example: dual ADC
+modular_adc_1: adc@0x18002200 {
+  compatible = "altr,modular-dual-adc";
+  reg = <0x18002000 0x00000008>,
+    <0x18002200 0x00000200>;
+  reg-names = "sequencer_csr", "sample_store_csr";
+  interrupt-parent = <&cpu>;
+  interrupts = <8>;
+  altr,adc-mode = <2>;
+  altr,adc-slot-count = <1>;
+  altr,adc1-slot-sequence-1 = <6>;
+  altr,adc2-slot-sequence-1 = <6>;
+};
\ No newline at end of file