diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt b/Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt
new file mode 100644
index 0000000..0972602
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt
@@ -0,0 +1,25 @@
+Raspberry Pi firmware clock provider.
+
+The Raspberry Pi architecture doesn't provide direct access to the
+CLOCKMAN peripheral from the ARM side, so Linux has to make requests
+to the VPU firmware to program them.
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:		Should be "raspberrypi,bcm2835-firmware-clocks"
+
+- #clock-cells:		Shall have value <1>.  The permitted clock-specifier
+			  values can be found in
+			  include/dt-bindings/clk/raspberrypi.h.
+
+- raspberrypi,firmware:	Phandle to the firmware driver node.
+
+Example:
+
+firmware_clocks: firmware-clocks {
+	compatible = "raspberrypi,bcm2835-firmware-clocks";
+	#clock-cells = <1>;
+	raspberrypi,firmware = <&firmware>;
+};
diff --git a/include/dt-bindings/clk/raspberrypi.h b/include/dt-bindings/clk/raspberrypi.h
new file mode 100644
index 0000000..ceec90f
--- /dev/null
+++ b/include/dt-bindings/clk/raspberrypi.h
@@ -0,0 +1,23 @@
+#/*
+ *  Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_CLK_RASPBERRYPI_H
+#define _DT_BINDINGS_CLK_RASPBERRYPI_H
+
+#define RPI_CLOCK_EMMC	1
+#define RPI_CLOCK_UART0	2
+#define RPI_CLOCK_ARM	3
+#define RPI_CLOCK_CORE	4
+#define RPI_CLOCK_V3D	5
+#define RPI_CLOCK_H264	6
+#define RPI_CLOCK_ISP	7
+#define RPI_CLOCK_SDRAM	8
+#define RPI_CLOCK_PIXEL	9
+#define RPI_CLOCK_PWM	10
+
+#endif