new file mode 100644
@@ -0,0 +1,35 @@
+* Ingenic JZ4780 I2C Bus controller
+
+Required properties:
+- compatible: should be "ingenic,jz4780-i2c"
+- reg: Should contain the address & size of the I2C controller registers.
+- interrupts: Should specify the interrupt provided by parent.
+- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
+- clock-frequency: desired I2C bus clock frequency in Hz.
+
+Recommended properties:
+- pinctrl-names: should be "default";
+- pinctrl-0: phandle to pinctrl function
+
+Optional properties:
+- interrupt-parent: Should be the phandle of the interrupt controller that
+ delivers interrupts to the I2C block.
+
+Example
+
+/ {
+ i2c4: i2c4@0x10054000 {
+ compatible = "ingenic,jz4780-i2c";
+ reg = <0x10054000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <56>;
+
+ clocks = <&cgu JZ4780_CLK_SMB4>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4_data>;
+
+ };
+};
+
Adds DT documentation for the the i2c controller for the JZ4780 SoC Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> --- V2 -> V3 Rebase to v4.0-rc6 V1 -> V2 Reworded example node. Was separated between board/soc. No need for that as such. Rebase to v4.0-rc3 --- .../devicetree/bindings/i2c/i2c-jz4780.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-jz4780.txt