| Message ID | 1424871377-1795-6-git-send-email-peter.griffin@linaro.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, Feb 25, 2015 at 7:36 AM, Peter Griffin <peter.griffin@linaro.org> wrote: > There is a subtle type phys-names should be phy-names. Using the > current example means you don't have working usb. Also update > the example to use the generic phy type constants which are now > used for miphy28. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/usb/dwc3-st.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt > index f9d7025..6634064 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt > @@ -62,7 +62,7 @@ st_dwc3: dwc3@8f94000 { > reg = <0x09900000 0x100000>; > interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; > dr_mode = "host"; > - phys-names = "usb2-phy", "usb3-phy"; > - phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; > + phy-names = "usb2-phy", "usb3-phy"; > + phys = <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>; > }; > }; > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index f9d7025..6634064 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -62,7 +62,7 @@ st_dwc3: dwc3@8f94000 { reg = <0x09900000 0x100000>; interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; dr_mode = "host"; - phys-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>; }; };
There is a subtle type phys-names should be phy-names. Using the current example means you don't have working usb. Also update the example to use the generic phy type constants which are now used for miphy28. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- Documentation/devicetree/bindings/usb/dwc3-st.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)