diff mbox

[v4,06/20] usb: dwc3: add U2Exit LFPS quirk

Message ID 1414663725-2195-7-git-send-email-ray.huang@amd.com
State New, archived
Headers show

Commit Message

Huang Rui Oct. 30, 2014, 10:08 a.m. UTC
This patch adds U2Exit LFPS quirk, and some special platforms can configure
that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 1 +
 drivers/usb/dwc3/core.c                        | 6 ++++++
 drivers/usb/dwc3/core.h                        | 3 +++
 drivers/usb/dwc3/platform_data.h               | 1 +
 4 files changed, 11 insertions(+)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 2b0c1f2..79ed37c 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -18,6 +18,7 @@  Optional properties:
 	Only really useful for FPGA builds.
  - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
  - snps,lpm-nyet-threshold: LPM NYET threshold
+ - snps,u2exit_lfps_quirk: set if we want to enable U2Exit LFPS quirk
 
 This is usually a subnode to DWC3 glue to which it is connected.
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2ac96e4..6d1f09f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -470,6 +470,9 @@  static int dwc3_core_init(struct dwc3 *dwc)
 	else
 		reg &= ~DWC3_GCTL_DISSCRAMBLE;
 
+	if (dwc->u2exit_lfps_quirk)
+		reg |= DWC3_GCTL_U2EXIT_LFPS;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.90a have a bug
 	 * where the device can fail to connect at SuperSpeed
@@ -726,6 +729,8 @@  static int dwc3_probe(struct platform_device *pdev)
 
 		dwc->disable_scramble_quirk = of_property_read_bool(node,
 				"snps,disable_scramble_quirk");
+		dwc->u2exit_lfps_quirk = of_property_read_bool(node,
+				"snps,u2exit_lfps_quirk");
 	} else if (pdata) {
 		dwc->maximum_speed = pdata->maximum_speed;
 		dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -736,6 +741,7 @@  static int dwc3_probe(struct platform_device *pdev)
 		dwc->dr_mode = pdata->dr_mode;
 
 		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
+		dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
 	}
 
 	/* default to superspeed if no maximum_speed passed */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 34f1e08..45130a1 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -166,6 +166,7 @@ 
 #define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
 #define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
 #define DWC3_GCTL_DISSCRAMBLE		(1 << 3)
+#define DWC3_GCTL_U2EXIT_LFPS		(1 << 2)
 #define DWC3_GCTL_GBLHIBERNATIONEN	(1 << 1)
 #define DWC3_GCTL_DSBLCLKGTNG		(1 << 0)
 
@@ -679,6 +680,7 @@  struct dwc3_scratchpad_array {
  * @start_config_issued: true when StartConfig command has been issued
  * @three_stage_setup: set if we perform a three phase setup
  * @disable_scramble_quirk: set if we enable the disable scramble quirk
+ * @u2exit_lfps_quirk: set if we enable U2Exit LFPS quirk
  */
 struct dwc3 {
 	struct usb_ctrlrequest	*ctrl_req;
@@ -787,6 +789,7 @@  struct dwc3 {
 	unsigned		three_stage_setup:1;
 
 	unsigned		disable_scramble_quirk:1;
+	unsigned		u2exit_lfps_quirk:1;
 };
 
 /* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index e128308..3f21591 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -29,4 +29,5 @@  struct dwc3_platform_data {
 
 	unsigned disable_scramble_quirk:1;
 	unsigned has_lpm_erratum:1;
+	unsigned u2exit_lfps_quirk:1;
 };