| Message ID | 1408464476-28316-3-git-send-email-dianders@chromium.org |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hi Doug, I reviewed it, the change is need. Reviewed-on: https://github.com/rkchrome/kernel.git Reviewed-by: Caesar Wang <caesar.wang@rock-chips.com> 在 2014年08月20日 00:07, Doug Anderson 写道: > The rk3288 has the ability to invert the polarity of the PWM. Let's > enable that ability. > > To do this we increase the number of pwm_cells to 3 to allow using the > PWM_POLARITY_INVERTED flag. Since the PWM driver on rk3288 is very > new, I thought this was OK. > > Signed-off-by: Doug Anderson <dianders@chromium.org> > --- > Changes in v3: > - Don't store a private copy of polarity. > - Use true instead of 1. > - Cleanup init order with "has_invert". > > Changes in v2: None > > .../devicetree/bindings/pwm/pwm-rockchip.txt | 4 +- > drivers/pwm/pwm-rockchip.c | 48 ++++++++++++++++++---- > 2 files changed, 43 insertions(+), 9 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt > index d47d15a..b8be3d0 100644 > --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt > +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt > @@ -7,8 +7,8 @@ Required properties: > "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC > - reg: physical base address and length of the controller's registers > - clocks: phandle and clock specifier of the PWM reference clock > - - #pwm-cells: should be 2. See pwm.txt in this directory for a > - description of the cell format. > + - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory > + for a description of the cell format. > > Example: > > diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c > index bdd8644..646aed2 100644 > --- a/drivers/pwm/pwm-rockchip.c > +++ b/drivers/pwm/pwm-rockchip.c > @@ -24,7 +24,9 @@ > #define PWM_ENABLE (1 << 0) > #define PWM_CONTINUOUS (1 << 1) > #define PWM_DUTY_POSITIVE (1 << 3) > +#define PWM_DUTY_NEGATIVE (0 << 3) > #define PWM_INACTIVE_NEGATIVE (0 << 4) > +#define PWM_INACTIVE_POSITIVE (1 << 4) > #define PWM_OUTPUT_LEFT (0 << 5) > #define PWM_LP_DISABLE (0 << 8) > > @@ -45,8 +47,10 @@ struct rockchip_pwm_regs { > struct rockchip_pwm_data { > struct rockchip_pwm_regs regs; > unsigned int prescaler; > + bool has_invert; > > - void (*set_enable)(struct pwm_chip *chip, bool enable); > + void (*set_enable)(struct pwm_chip *chip, > + struct pwm_device *pwm, bool enable); > }; > > static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c) > @@ -54,7 +58,8 @@ static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c) > return container_of(c, struct rockchip_pwm_chip, chip); > } > > -static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) > +static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, > + struct pwm_device *pwm, bool enable) > { > struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN; > @@ -70,14 +75,19 @@ static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) > writel_relaxed(val, pc->base + pc->data->regs.ctrl); > } > > -static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) > +static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, > + struct pwm_device *pwm, bool enable) > { > struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE | > - PWM_CONTINUOUS | PWM_DUTY_POSITIVE | > - PWM_INACTIVE_NEGATIVE; > + PWM_CONTINUOUS; > u32 val; > > + if (pwm->polarity == PWM_POLARITY_INVERSED) > + enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE; > + else > + enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE; > + > val = readl_relaxed(pc->base + pc->data->regs.ctrl); > > if (enable) > @@ -124,6 +134,23 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, > return 0; > } > > +int rockchip_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, > + enum pwm_polarity polarity) > +{ > + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > + > + if (!pc->data->has_invert) > + return -ENOSYS; > + > + /* > + * No action needed here because pwm->polarity will be set by the core > + * and the core will only change polarity when the PWM is not enabled. > + * We'll handle things in set_enable(). > + */ > + > + return 0; > +} > + > static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) > { > struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > @@ -133,7 +160,7 @@ static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) > if (ret) > return ret; > > - pc->data->set_enable(chip, true); > + pc->data->set_enable(chip, pwm, true); > > return 0; > } > @@ -142,13 +169,14 @@ static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) > { > struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > > - pc->data->set_enable(chip, false); > + pc->data->set_enable(chip, pwm, false); > > clk_disable(pc->clk); > } > > static const struct pwm_ops rockchip_pwm_ops = { > .config = rockchip_pwm_config, > + .set_polarity = rockchip_pwm_set_polarity, > .enable = rockchip_pwm_enable, > .disable = rockchip_pwm_disable, > .owner = THIS_MODULE, > @@ -173,6 +201,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = { > .ctrl = 0x0c, > }, > .prescaler = 1, > + .has_invert = true, > .set_enable = rockchip_pwm_set_enable_v2, > }; > > @@ -184,6 +213,7 @@ static const struct rockchip_pwm_data pwm_data_vop = { > .ctrl = 0x00, > }, > .prescaler = 1, > + .has_invert = true, > .set_enable = rockchip_pwm_set_enable_v2, > }; > > @@ -230,6 +260,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev) > pc->chip.ops = &rockchip_pwm_ops; > pc->chip.base = -1; > pc->chip.npwm = 1; > + if (pc->data->has_invert) { > + pc->chip.of_xlate = of_pwm_xlate_with_flags; > + pc->chip.of_pwm_n_cells = 3; > + } > > ret = pwmchip_add(&pc->chip); > if (ret < 0) {
On Tue, Aug 19, 2014 at 09:07:54AM -0700, Doug Anderson wrote: > The rk3288 has the ability to invert the polarity of the PWM. Let's > enable that ability. > > To do this we increase the number of pwm_cells to 3 to allow using the > PWM_POLARITY_INVERTED flag. Since the PWM driver on rk3288 is very > new, I thought this was OK. I don't see any files in arch/arm/boot/dts using either of the rockchip,vop-pwm or rockchip,rk3288-pwm compatible strings, so there's no reason to consider this stable ABI yet. As far as I'm concerned the last sentence can just as well be dropped. Besides, patches have been posted to support #pwm-cells = <2> and #pwm-cells = <3> at the same time which should give you backwards- compatibility for free. A couple more comments inline. > diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c [...] > +int rockchip_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, > + enum pwm_polarity polarity) This should be static. > +{ > + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > + > + if (!pc->data->has_invert) > + return -ENOSYS; > + > + /* > + * No action needed here because pwm->polarity will be set by the core > + * and the core will only change polarity when the PWM is not enabled. > + * We'll handle things in set_enable(). > + */ > + > + return 0; > +} An alternative here would be to provide a separate pwm_ops with .set_polarity = NULL for the versions of the IP block that don't support polarity inversion yet, but this works for me too. > @@ -173,6 +201,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = { > .ctrl = 0x0c, > }, > .prescaler = 1, > + .has_invert = true, > .set_enable = rockchip_pwm_set_enable_v2, > }; > > @@ -184,6 +213,7 @@ static const struct rockchip_pwm_data pwm_data_vop = { > .ctrl = 0x00, > }, > .prescaler = 1, > + .has_invert = true, > .set_enable = rockchip_pwm_set_enable_v2, > }; Can you please add a '.has_invert = false,' line to pwm_data_v1? I know it's not strictly necessary but I like it when things are explicitly stated. > > @@ -230,6 +260,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev) > pc->chip.ops = &rockchip_pwm_ops; > pc->chip.base = -1; > pc->chip.npwm = 1; > + if (pc->data->has_invert) { There should be a blank line between the above two. Thierry
Thierry, On Wed, Aug 20, 2014 at 3:04 AM, Thierry Reding <thierry.reding@gmail.com> wrote: > On Tue, Aug 19, 2014 at 09:07:54AM -0700, Doug Anderson wrote: >> The rk3288 has the ability to invert the polarity of the PWM. Let's >> enable that ability. >> >> To do this we increase the number of pwm_cells to 3 to allow using the >> PWM_POLARITY_INVERTED flag. Since the PWM driver on rk3288 is very >> new, I thought this was OK. > > I don't see any files in arch/arm/boot/dts using either of the > rockchip,vop-pwm or rockchip,rk3288-pwm compatible strings, so there's > no reason to consider this stable ABI yet. As far as I'm concerned the > last sentence can just as well be dropped. > > Besides, patches have been posted to support #pwm-cells = <2> and > #pwm-cells = <3> at the same time which should give you backwards- > compatibility for free. Done. I'm happy that the subsystem is being improved to handle pwm-cells more dynamically, too! That's a nice improvement. > A couple more comments inline. > >> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c > [...] >> +int rockchip_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, >> + enum pwm_polarity polarity) > > This should be static. Done. >> +{ >> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); >> + >> + if (!pc->data->has_invert) >> + return -ENOSYS; >> + >> + /* >> + * No action needed here because pwm->polarity will be set by the core >> + * and the core will only change polarity when the PWM is not enabled. >> + * We'll handle things in set_enable(). >> + */ >> + >> + return 0; >> +} > > An alternative here would be to provide a separate pwm_ops with > .set_polarity = NULL for the versions of the IP block that don't support > polarity inversion yet, but this works for me too. Good point. I'll make the change since it paves the way for other pwm_ops that are different. >> @@ -173,6 +201,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = { >> .ctrl = 0x0c, >> }, >> .prescaler = 1, >> + .has_invert = true, >> .set_enable = rockchip_pwm_set_enable_v2, >> }; >> >> @@ -184,6 +213,7 @@ static const struct rockchip_pwm_data pwm_data_vop = { >> .ctrl = 0x00, >> }, >> .prescaler = 1, >> + .has_invert = true, >> .set_enable = rockchip_pwm_set_enable_v2, >> }; > > Can you please add a '.has_invert = false,' line to pwm_data_v1? I know > it's not strictly necessary but I like it when things are explicitly > stated. No longer relevant with different pwm_ops. >> @@ -230,6 +260,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev) >> pc->chip.ops = &rockchip_pwm_ops; >> pc->chip.base = -1; >> pc->chip.npwm = 1; >> + if (pc->data->has_invert) { > > There should be a blank line between the above two. Done. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On August 20, 2014 1:54:11 PM CDT, Doug Anderson <dianders@chromium.org> wrote: >On Wed, Aug 20, 2014 at 3:04 AM, Thierry Reding ><thierry.reding@gmail.com> wrote: >> On Tue, Aug 19, 2014 at 09:07:54AM -0700, Doug Anderson wrote: >>> The rk3288 has the ability to invert >>> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); >>> + >>> + if (!pc->data->has_invert) >>> + return -ENOSYS; >>> + At the kernel summit hpa also mentioned that ENOSYS should only be used for missing syscalls. Not sure what error code would suit better here though... Thanks.
Dmitry, On Wed, Aug 20, 2014 at 12:29 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > On August 20, 2014 1:54:11 PM CDT, Doug Anderson <dianders@chromium.org> wrote: >>On Wed, Aug 20, 2014 at 3:04 AM, Thierry Reding >><thierry.reding@gmail.com> wrote: >>> On Tue, Aug 19, 2014 at 09:07:54AM -0700, Doug Anderson wrote: >>>> The rk3288 has the ability to invert >>>> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); >>>> + >>>> + if (!pc->data->has_invert) >>>> + return -ENOSYS; >>>> + > > At the kernel summit hpa also mentioned that ENOSYS should only be used for missing syscalls. Not sure what error code would suit better here though... Luckily this code is gone now. See v4 of the series. ;) -Doug -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 20, 2014 at 02:29:17PM -0500, Dmitry Torokhov wrote: > On August 20, 2014 1:54:11 PM CDT, Doug Anderson <dianders@chromium.org> wrote: > >On Wed, Aug 20, 2014 at 3:04 AM, Thierry Reding > ><thierry.reding@gmail.com> wrote: > >> On Tue, Aug 19, 2014 at 09:07:54AM -0700, Doug Anderson wrote: > >>> The rk3288 has the ability to invert > >>> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); > >>> + > >>> + if (!pc->data->has_invert) > >>> + return -ENOSYS; > >>> + > > At the kernel summit hpa also mentioned that ENOSYS should only be > used for missing syscalls. Not sure what error code would suit better > here though... I'd be interested in the rationale why ENOSYS shouldn't be used within the kernel. As long as it doesn't leak to userspace where it could possibly confuse applications I don't see any harm in using it. Thierry
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt index d47d15a..b8be3d0 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt @@ -7,8 +7,8 @@ Required properties: "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC - reg: physical base address and length of the controller's registers - clocks: phandle and clock specifier of the PWM reference clock - - #pwm-cells: should be 2. See pwm.txt in this directory for a - description of the cell format. + - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory + for a description of the cell format. Example: diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c index bdd8644..646aed2 100644 --- a/drivers/pwm/pwm-rockchip.c +++ b/drivers/pwm/pwm-rockchip.c @@ -24,7 +24,9 @@ #define PWM_ENABLE (1 << 0) #define PWM_CONTINUOUS (1 << 1) #define PWM_DUTY_POSITIVE (1 << 3) +#define PWM_DUTY_NEGATIVE (0 << 3) #define PWM_INACTIVE_NEGATIVE (0 << 4) +#define PWM_INACTIVE_POSITIVE (1 << 4) #define PWM_OUTPUT_LEFT (0 << 5) #define PWM_LP_DISABLE (0 << 8) @@ -45,8 +47,10 @@ struct rockchip_pwm_regs { struct rockchip_pwm_data { struct rockchip_pwm_regs regs; unsigned int prescaler; + bool has_invert; - void (*set_enable)(struct pwm_chip *chip, bool enable); + void (*set_enable)(struct pwm_chip *chip, + struct pwm_device *pwm, bool enable); }; static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c) @@ -54,7 +58,8 @@ static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c) return container_of(c, struct rockchip_pwm_chip, chip); } -static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) +static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, + struct pwm_device *pwm, bool enable) { struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN; @@ -70,14 +75,19 @@ static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) writel_relaxed(val, pc->base + pc->data->regs.ctrl); } -static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) +static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, + struct pwm_device *pwm, bool enable) { struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE | - PWM_CONTINUOUS | PWM_DUTY_POSITIVE | - PWM_INACTIVE_NEGATIVE; + PWM_CONTINUOUS; u32 val; + if (pwm->polarity == PWM_POLARITY_INVERSED) + enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE; + else + enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE; + val = readl_relaxed(pc->base + pc->data->regs.ctrl); if (enable) @@ -124,6 +134,23 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } +int rockchip_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); + + if (!pc->data->has_invert) + return -ENOSYS; + + /* + * No action needed here because pwm->polarity will be set by the core + * and the core will only change polarity when the PWM is not enabled. + * We'll handle things in set_enable(). + */ + + return 0; +} + static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); @@ -133,7 +160,7 @@ static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) if (ret) return ret; - pc->data->set_enable(chip, true); + pc->data->set_enable(chip, pwm, true); return 0; } @@ -142,13 +169,14 @@ static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip); - pc->data->set_enable(chip, false); + pc->data->set_enable(chip, pwm, false); clk_disable(pc->clk); } static const struct pwm_ops rockchip_pwm_ops = { .config = rockchip_pwm_config, + .set_polarity = rockchip_pwm_set_polarity, .enable = rockchip_pwm_enable, .disable = rockchip_pwm_disable, .owner = THIS_MODULE, @@ -173,6 +201,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = { .ctrl = 0x0c, }, .prescaler = 1, + .has_invert = true, .set_enable = rockchip_pwm_set_enable_v2, }; @@ -184,6 +213,7 @@ static const struct rockchip_pwm_data pwm_data_vop = { .ctrl = 0x00, }, .prescaler = 1, + .has_invert = true, .set_enable = rockchip_pwm_set_enable_v2, }; @@ -230,6 +260,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev) pc->chip.ops = &rockchip_pwm_ops; pc->chip.base = -1; pc->chip.npwm = 1; + if (pc->data->has_invert) { + pc->chip.of_xlate = of_pwm_xlate_with_flags; + pc->chip.of_pwm_n_cells = 3; + } ret = pwmchip_add(&pc->chip); if (ret < 0) {
The rk3288 has the ability to invert the polarity of the PWM. Let's enable that ability. To do this we increase the number of pwm_cells to 3 to allow using the PWM_POLARITY_INVERTED flag. Since the PWM driver on rk3288 is very new, I thought this was OK. Signed-off-by: Doug Anderson <dianders@chromium.org> --- Changes in v3: - Don't store a private copy of polarity. - Use true instead of 1. - Cleanup init order with "has_invert". Changes in v2: None .../devicetree/bindings/pwm/pwm-rockchip.txt | 4 +- drivers/pwm/pwm-rockchip.c | 48 ++++++++++++++++++---- 2 files changed, 43 insertions(+), 9 deletions(-)