| Message ID | 1394011373-4057-4-git-send-email-k.kozlowski@samsung.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hi Krzysztof, On 5 March 2014 14:52, Krzysztof Kozlowski <k.kozlowski@samsung.com> wrote: > Add bindings documentation for S2MPS14 device to the s2mps11 driver. nit: s/s2mps11/S2MPS11 > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Liam Girdwood <lgirdwood@gmail.com> > Cc: Tomasz Figa <t.figa@samsung.com> > Cc: devicetree@vger.kernel.org > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Acked-by: Tomasz Figa <t.figa@samsung.com> > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index 15ee89c3cc7b..f69bec294f02 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > > -* Samsung S2MPS11 Voltage and Current Regulator > +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator > > The Samsung S2MPS11 is a multi-function device which includes voltage and > current regulators, RTC, charger controller and other sub-blocks. It is > @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. Each sub-block is > addressed by the host system using different I2C slave addresses. > > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic". > +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic". > - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. > > Optional properties: > @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number > as per the datasheet of s2mps11. > > - LDOn > - - valid values for n are 1 to 38 > + - valid values for n are: > + - S2MPS11: 1 to 38 > + - S2MPS14: 1 to 25 > - Example: LDO1, LD02, LDO28 > - BUCKn > - - valid values for n are 1 to 10. > + - valid values for n are: > + - S2MPS11: 1 to 10 > + - S2MPS14: 1 to 5 > - Example: BUCK1, BUCK2, BUCK9 > > Example: > -- > 1.7.9.5 > Looks good. Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 15ee89c3cc7b..f69bec294f02 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11 Voltage and Current Regulator +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number as per the datasheet of s2mps11. - LDOn - - valid values for n are 1 to 38 + - valid values for n are: + - S2MPS11: 1 to 38 + - S2MPS14: 1 to 25 - Example: LDO1, LD02, LDO28 - BUCKn - - valid values for n are 1 to 10. + - valid values for n are: + - S2MPS11: 1 to 10 + - S2MPS14: 1 to 5 - Example: BUCK1, BUCK2, BUCK9 Example: