diff mbox

[PATCHv2] usb: chipidea: add support for USB OTG controller on TI-NSPIRE

Message ID 1385278667-91856-1-git-send-email-dt.tangr@gmail.com
State Superseded, archived
Headers show

Commit Message

Daniel Tang Nov. 24, 2013, 7:37 a.m. UTC 
From: Daniel Tang <dt.tangr@gmail.com>

Changelog v2:
 * Rename ci13xxx to ci_hdrc
 * Fixed alignment issues

The USB controller in TI-NSPIRE calculators are based off either Freescale's
USB OTG controller or the USB controller found in the IMX233, both of which
are Chipidea compatible.

This patch adds a device tree binding for the controller.

Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
---
 .../devicetree/bindings/usb/ci-hdrc-nspire.txt     | 17 +++++
 drivers/usb/chipidea/Makefile                      |  1 +
 drivers/usb/chipidea/ci_hdrc_nspire.c              | 74 ++++++++++++++++++++++
 3 files changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
 create mode 100644 drivers/usb/chipidea/ci_hdrc_nspire.c

--
1.8.1.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Peter Chen Nov. 24, 2013, 10:12 a.m. UTC | #1 
On Sun, Nov 24, 2013 at 06:37:47PM +1100, dt.tangr@gmail.com wrote:
> From: Daniel Tang <dt.tangr@gmail.com>
> 
> Changelog v2:
>  * Rename ci13xxx to ci_hdrc
>  * Fixed alignment issues
> 
> The USB controller in TI-NSPIRE calculators are based off either Freescale's
> USB OTG controller or the USB controller found in the IMX233, both of which
> are Chipidea compatible.
> 
> This patch adds a device tree binding for the controller.
> 
> Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
> ---

Please put the "Changelog v2" here, the change log should
not be in commit log, it is for review purpose.

> +};
> +
> +MODULE_DEVICE_TABLE(of, ci_hdrc_nspire_dt_ids);
> +module_platform_driver(ci_hdrc_nspire_driver);
> +
> +MODULE_ALIAS("platform:nspire_usb");
> +MODULE_ALIAS("platform:ci_hdrc_nspire");

Just curious, why you need to two alias?
Daniel Tang Nov. 25, 2013, 3:52 a.m. UTC | #2 
Hi,

On 24/11/2013, at 9:12 PM, Peter Chen <Peter.Chen@freescale.com> wrote:

> On Sun, Nov 24, 2013 at 06:37:47PM +1100, dt.tangr@gmail.com wrote:
> 
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, ci_hdrc_nspire_dt_ids);
>> +module_platform_driver(ci_hdrc_nspire_driver);
>> +
>> +MODULE_ALIAS("platform:nspire_usb");
>> +MODULE_ALIAS("platform:ci_hdrc_nspire");
> 
> Just curious, why you need to two alias?

Oops, I must've forgotten to remove this. I'll remove it in the next patch.

> 
> -- 
> 
> Best Regards,
> Peter Chen
> 

Cheers,
Daniel Tang
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
new file mode 100644
index 0000000..5ba8e90
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
@@ -0,0 +1,17 @@ 
+* TI-Nspire USB OTG Controller
+
+Required properties:
+- compatible: Should be "zevio,nspire-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Recommended properies:
+- vbus-supply: regulator for vbus
+
+Examples:
+		usb0: usb@B0000000 {
+			reg = <0xB0000000 0x1000>;
+			compatible = "zevio,nspire-usb";
+			interrupts = <8>;
+			vbus-supply = <&vbus_reg>;
+		};
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index a99d980..245ea4d 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -10,6 +10,7 @@  ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+= debug.o
 # Glue/Bridge layers go here

 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
+obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_nspire.o

 # PCI doesn't provide stubs, need to check
 ifneq ($(CONFIG_PCI),)
diff --git a/drivers/usb/chipidea/ci_hdrc_nspire.c b/drivers/usb/chipidea/ci_hdrc_nspire.c
new file mode 100644
index 0000000..5d408c3
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_nspire.c
@@ -0,0 +1,74 @@ 
+/*
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * Based off drivers/usb/chipidea/ci_hdrc_msm.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+
+static struct ci_hdrc_platform_data ci_hdrc_nspire_platdata = {
+	.name			= "ci_hdrc_nspire",
+	.flags			= CI_HDRC_REGS_SHARED,
+	.capoffset		= DEF_CAPOFFSET,
+};
+
+static int ci_hdrc_nspire_probe(struct platform_device *pdev)
+{
+	struct platform_device *ci_pdev;
+
+	dev_dbg(&pdev->dev, "ci_hdrc_nspire_probe\n");
+
+	ci_pdev = ci_hdrc_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci_hdrc_nspire_platdata);
+
+	if (IS_ERR(ci_pdev)) {
+		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
+		return PTR_ERR(ci_pdev);
+	}
+
+	platform_set_drvdata(pdev, ci_pdev);
+
+	return 0;
+}
+
+static int ci_hdrc_nspire_remove(struct platform_device *pdev)
+{
+	struct platform_device *ci_pdev = platform_get_drvdata(pdev);
+
+	ci_hdrc_remove_device(ci_pdev);
+
+	return 0;
+}
+
+static const struct of_device_id ci_hdrc_nspire_dt_ids[] = {
+	{ .compatible = "zevio,nspire-usb", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver ci_hdrc_nspire_driver = {
+	.probe = ci_hdrc_nspire_probe,
+	.remove = ci_hdrc_nspire_remove,
+	.driver = {
+		.name = "nspire_usb",
+		.owner = THIS_MODULE,
+		.of_match_table = ci_hdrc_nspire_dt_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, ci_hdrc_nspire_dt_ids);
+module_platform_driver(ci_hdrc_nspire_driver);
+
+MODULE_ALIAS("platform:nspire_usb");
+MODULE_ALIAS("platform:ci_hdrc_nspire");
+MODULE_LICENSE("GPL v2");