new file mode 100644
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+ (SPMI) bus. It provides interrupts and power supply.
+
+ The GPIO and interrupt settings are represented as part of the top-level PMIC
+ node.
+
+ The SPMI controller part is provided by
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,hi6421v600-spmi
+
+ reg:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ gpios:
+ maxItems: 1
+ description: GPIO used for IRQs
+
+ regulators:
+ type: object
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ '^ldo[0-9]+@[0-9a-f]$':
+ type: object
+
+ $ref: "/schemas/regulator/regulator.yaml#"
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ /* pmic properties */
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9: LDO9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15: LDO15 {
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 {
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 {
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 {
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
@@ -8291,6 +8291,13 @@ S: Maintained
F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
F: drivers/spmi/hisi-spmi-controller.c
+HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
+M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+F: drivers/mfd/hi6421-spmi-pmic.c
+
HISILICON STAGING DRIVERS FOR HIKEY 960/970
M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
S: Maintained
@@ -509,6 +509,22 @@ config MFD_HI6421_PMIC
menus in order to enable them.
We communicate with the Hi6421 via memory-mapped I/O.
+config MFD_HI6421_SPMI
+ tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+ depends on OF
+ depends on SPMI
+ select MFD_CORE
+ select REGMAP_SPMI
+ help
+ Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+ multi-functions, such as regulators, RTC, codec, Coulomb counter,
+ etc.
+
+ This driver includes core APIs _only_. You have to select
+ individual components like voltage regulators under corresponding
+ menus in order to enable them.
+ We communicate with the Hi6421v600 via a SPMI bus.
+
config MFD_HI655X_PMIC
tristate "HiSilicon Hi655X series PMU/Codec IC"
depends on ARCH_HISI || COMPILE_TEST
@@ -232,6 +232,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_IQS62X) += iqs62x.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
new file mode 100644
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013-2021 Linaro Ltd.
+ * Copyright (c) 2011-2021 HiSilicon Technologies Co., Ltd.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+enum hi6421_spmi_pmic_irq_list {
+ OTMP = 0,
+ VBUS_CONNECT,
+ VBUS_DISCONNECT,
+ ALARMON_R,
+ HOLD_6S,
+ HOLD_1S,
+ POWERKEY_UP,
+ POWERKEY_DOWN,
+ OCP_SCP_R,
+ COUL_R,
+ SIM0_HPD_R,
+ SIM0_HPD_F,
+ SIM1_HPD_R,
+ SIM1_HPD_F,
+
+ PMIC_IRQ_LIST_MAX
+};
+
+#define HISI_IRQ_BANK_SIZE 2
+
+/*
+ * IRQ number for the power key button and mask for both UP and DOWN IRQs
+ */
+#define HISI_POWERKEY_IRQ_NUM 0
+#define HISI_IRQ_POWERKEY_UP_DOWN (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+
+/*
+ * Registers for IRQ address and IRQ mask bits
+ *
+ * Please notice that we need to regmap a larger region, as other
+ * registers are used by the regulators.
+ * See drivers/regulator/hi6421-regulator.c.
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
+#define SOC_PMIC_IRQ0_ADDR 0x0212
+
+/*
+ * The IRQs are mapped as:
+ *
+ * ====================== ============= ============ =====
+ * IRQ MASK REGISTER IRQ REGISTER BIT
+ * ====================== ============= ============ =====
+ * OTMP 0x0202 0x212 bit 0
+ * VBUS_CONNECT 0x0202 0x212 bit 1
+ * VBUS_DISCONNECT 0x0202 0x212 bit 2
+ * ALARMON_R 0x0202 0x212 bit 3
+ * HOLD_6S 0x0202 0x212 bit 4
+ * HOLD_1S 0x0202 0x212 bit 5
+ * POWERKEY_UP 0x0202 0x212 bit 6
+ * POWERKEY_DOWN 0x0202 0x212 bit 7
+ *
+ * OCP_SCP_R 0x0203 0x213 bit 0
+ * COUL_R 0x0203 0x213 bit 1
+ * SIM0_HPD_R 0x0203 0x213 bit 2
+ * SIM0_HPD_F 0x0203 0x213 bit 3
+ * SIM1_HPD_R 0x0203 0x213 bit 4
+ * SIM1_HPD_F 0x0203 0x213 bit 5
+ * ====================== ============= ============ =====
+ *
+ * Each mask register contains 8 bits. The ancillary macros below
+ * convert a number from 0 to 14 into a register address and a bit mask
+ */
+#define HISI_IRQ_MASK_REG(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \
+ (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
+#define HISI_IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
+#define HISI_8BITS_MASK 0xff
+
+static const struct mfd_cell hi6421v600_devs[] = {
+ { .name = "hi6421v600-regulator", },
+};
+
+static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
+{
+ struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
+ unsigned long pending;
+ unsigned int in;
+ int i, offset;
+
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+
+ /* Mark pending IRQs as handled */
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
+
+ pending = in & HISI_8BITS_MASK;
+
+ if (i == HISI_POWERKEY_IRQ_NUM &&
+ (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
+ /*
+ * If both powerkey down and up IRQs are received,
+ * handle them at the right order
+ */
+ generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
+ generic_handle_irq(ddata->irqs[POWERKEY_UP]);
+ pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
+ }
+
+ if (!pending)
+ continue;
+
+ for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
+ generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void hi6421_spmi_irq_mask(struct irq_data *d)
+{
+ struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ unsigned int data;
+ u32 offset;
+
+ offset = HISI_IRQ_MASK_REG(d);
+
+ spin_lock_irqsave(&ddata->lock, flags);
+
+ regmap_read(ddata->regmap, offset, &data);
+ data |= HISI_IRQ_MASK_BIT(d);
+ regmap_write(ddata->regmap, offset, data);
+
+ spin_unlock_irqrestore(&ddata->lock, flags);
+}
+
+static void hi6421_spmi_irq_unmask(struct irq_data *d)
+{
+ struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
+ u32 data, offset;
+ unsigned long flags;
+
+ offset = HISI_IRQ_MASK_REG(d);
+
+ spin_lock_irqsave(&ddata->lock, flags);
+
+ regmap_read(ddata->regmap, offset, &data);
+ data &= ~HISI_IRQ_MASK_BIT(d);
+ regmap_write(ddata->regmap, offset, data);
+
+ spin_unlock_irqrestore(&ddata->lock, flags);
+}
+
+static struct irq_chip hi6421_spmi_pmu_irqchip = {
+ .name = "hi6421v600-irq",
+ .irq_mask = hi6421_spmi_irq_mask,
+ .irq_unmask = hi6421_spmi_irq_unmask,
+ .irq_disable = hi6421_spmi_irq_mask,
+ .irq_enable = hi6421_spmi_irq_unmask,
+};
+
+static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct hi6421_spmi_pmic *ddata = d->host_data;
+
+ irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
+ handle_simple_irq, "hi6421v600");
+ irq_set_chip_data(virq, ddata);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops hi6421_spmi_domain_ops = {
+ .map = hi6421_spmi_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
+{
+ int i;
+ unsigned int pending;
+
+ /* Mask all IRQs */
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+ HISI_8BITS_MASK);
+
+ /* Mark all IRQs as handled */
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+ regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
+ regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
+ HISI_8BITS_MASK);
+ }
+}
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 16,
+ .val_bits = BITS_PER_BYTE,
+ .max_register = 0xffff,
+ .fast_io = true
+};
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct hi6421_spmi_pmic *ddata;
+ unsigned int virq;
+ int ret, i;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
+ if (IS_ERR(ddata->regmap))
+ return PTR_ERR(ddata->regmap);
+
+ spin_lock_init(&ddata->lock);
+
+ ddata->dev = dev;
+
+ ddata->gpio = of_get_gpio(np, 0);
+ if (ddata->gpio < 0)
+ return ddata->gpio;
+
+ if (!gpio_is_valid(ddata->gpio))
+ return -EINVAL;
+
+ ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
+ if (ret < 0) {
+ dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
+ return ret;
+ }
+
+ ddata->irq = gpio_to_irq(ddata->gpio);
+
+ hi6421_spmi_pmic_irq_init(ddata);
+
+ ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
+ if (!ddata->irqs)
+ return -ENOMEM;
+
+ ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
+ &hi6421_spmi_domain_ops, ddata);
+ if (!ddata->domain) {
+ dev_err(dev, "Failed to create IRQ domain\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
+ virq = irq_create_mapping(ddata->domain, i);
+ if (!virq) {
+ dev_err(dev, "Failed to map H/W IRQ\n");
+ return -ENODEV;
+ }
+ ddata->irqs[i] = virq;
+ }
+
+ ret = devm_request_threaded_irq(dev,
+ ddata->irq, hi6421_spmi_irq_handler,
+ NULL,
+ IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+ "pmic", ddata);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+ ret);
+ return ret;
+ }
+
+ dev_set_drvdata(&pdev->dev, ddata);
+
+ ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+ NULL, 0, NULL);
+ if (ret < 0)
+ dev_err(dev, "Failed to add child devices: %d\n", ret);
+
+ return ret;
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+ { .compatible = "hisilicon,hi6421-spmi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+ .driver = {
+ .name = "hi6421-spmi-pmic",
+ .of_match_table = pmic_spmi_id_table,
+ },
+ .probe = hi6421_spmi_pmic_probe,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
@@ -104,6 +104,4 @@ source "drivers/staging/qlge/Kconfig"
source "drivers/staging/wfx/Kconfig"
-source "drivers/staging/hikey9xx/Kconfig"
-
endif # STAGING
@@ -42,4 +42,3 @@ obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
obj-$(CONFIG_KPC2000) += kpc2000/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_WFX) += wfx/
-obj-y += hikey9xx/
deleted file mode 100644
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# to be placed at drivers/mfd
-config MFD_HI6421_SPMI
- tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
- depends on HAS_IOMEM
- depends on OF
- depends on SPMI
- select MFD_CORE
- select REGMAP_SPMI
- help
- Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
- multi-functions, such as regulators, RTC, codec, Coulomb counter,
- etc.
-
- This driver includes core APIs _only_. You have to select
- individual components like voltage regulators under corresponding
- menus in order to enable them.
- We communicate with the Hi6421v600 via a SPMI bus.
deleted file mode 100644
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
deleted file mode 100644
@@ -1,5 +0,0 @@
-ToDo list:
-
-- Port other drivers needed by Hikey 960/970;
-- Test drivers on Hikey 960;
-- Validate device tree bindings.
deleted file mode 100644
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device driver for regulators in HISI PMIC IC
- *
- * Copyright (c) 2013-2021 Linaro Ltd.
- * Copyright (c) 2011-2021 HiSilicon Technologies Co., Ltd.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
- */
-
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
-#include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-enum hi6421_spmi_pmic_irq_list {
- OTMP = 0,
- VBUS_CONNECT,
- VBUS_DISCONNECT,
- ALARMON_R,
- HOLD_6S,
- HOLD_1S,
- POWERKEY_UP,
- POWERKEY_DOWN,
- OCP_SCP_R,
- COUL_R,
- SIM0_HPD_R,
- SIM0_HPD_F,
- SIM1_HPD_R,
- SIM1_HPD_F,
-
- PMIC_IRQ_LIST_MAX
-};
-
-#define HISI_IRQ_BANK_SIZE 2
-
-/*
- * IRQ number for the power key button and mask for both UP and DOWN IRQs
- */
-#define HISI_POWERKEY_IRQ_NUM 0
-#define HISI_IRQ_POWERKEY_UP_DOWN (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-
-/*
- * Registers for IRQ address and IRQ mask bits
- *
- * Please notice that we need to regmap a larger region, as other
- * registers are used by the regulators.
- * See drivers/regulator/hi6421-regulator.c.
- */
-#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
-#define SOC_PMIC_IRQ0_ADDR 0x0212
-
-/*
- * The IRQs are mapped as:
- *
- * ====================== ============= ============ =====
- * IRQ MASK REGISTER IRQ REGISTER BIT
- * ====================== ============= ============ =====
- * OTMP 0x0202 0x212 bit 0
- * VBUS_CONNECT 0x0202 0x212 bit 1
- * VBUS_DISCONNECT 0x0202 0x212 bit 2
- * ALARMON_R 0x0202 0x212 bit 3
- * HOLD_6S 0x0202 0x212 bit 4
- * HOLD_1S 0x0202 0x212 bit 5
- * POWERKEY_UP 0x0202 0x212 bit 6
- * POWERKEY_DOWN 0x0202 0x212 bit 7
- *
- * OCP_SCP_R 0x0203 0x213 bit 0
- * COUL_R 0x0203 0x213 bit 1
- * SIM0_HPD_R 0x0203 0x213 bit 2
- * SIM0_HPD_F 0x0203 0x213 bit 3
- * SIM1_HPD_R 0x0203 0x213 bit 4
- * SIM1_HPD_F 0x0203 0x213 bit 5
- * ====================== ============= ============ =====
- *
- * Each mask register contains 8 bits. The ancillary macros below
- * convert a number from 0 to 14 into a register address and a bit mask
- */
-#define HISI_IRQ_MASK_REG(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \
- (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
-#define HISI_IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
-#define HISI_8BITS_MASK 0xff
-
-static const struct mfd_cell hi6421v600_devs[] = {
- { .name = "hi6421v600-regulator", },
-};
-
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
-{
- struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
- unsigned long pending;
- unsigned int in;
- int i, offset;
-
- for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
-
- /* Mark pending IRQs as handled */
- regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
-
- pending = in & HISI_8BITS_MASK;
-
- if (i == HISI_POWERKEY_IRQ_NUM &&
- (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
- /*
- * If both powerkey down and up IRQs are received,
- * handle them at the right order
- */
- generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
- generic_handle_irq(ddata->irqs[POWERKEY_UP]);
- pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
- }
-
- if (!pending)
- continue;
-
- for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
- generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static void hi6421_spmi_irq_mask(struct irq_data *d)
-{
- struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
- unsigned long flags;
- unsigned int data;
- u32 offset;
-
- offset = HISI_IRQ_MASK_REG(d);
-
- spin_lock_irqsave(&ddata->lock, flags);
-
- regmap_read(ddata->regmap, offset, &data);
- data |= HISI_IRQ_MASK_BIT(d);
- regmap_write(ddata->regmap, offset, data);
-
- spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static void hi6421_spmi_irq_unmask(struct irq_data *d)
-{
- struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
- u32 data, offset;
- unsigned long flags;
-
- offset = HISI_IRQ_MASK_REG(d);
-
- spin_lock_irqsave(&ddata->lock, flags);
-
- regmap_read(ddata->regmap, offset, &data);
- data &= ~HISI_IRQ_MASK_BIT(d);
- regmap_write(ddata->regmap, offset, data);
-
- spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static struct irq_chip hi6421_spmi_pmu_irqchip = {
- .name = "hi6421v600-irq",
- .irq_mask = hi6421_spmi_irq_mask,
- .irq_unmask = hi6421_spmi_irq_unmask,
- .irq_disable = hi6421_spmi_irq_mask,
- .irq_enable = hi6421_spmi_irq_unmask,
-};
-
-static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct hi6421_spmi_pmic *ddata = d->host_data;
-
- irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
- handle_simple_irq, "hi6421v600");
- irq_set_chip_data(virq, ddata);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static const struct irq_domain_ops hi6421_spmi_domain_ops = {
- .map = hi6421_spmi_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
-{
- int i;
- unsigned int pending;
-
- /* Mask all IRQs */
- for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
- regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
- HISI_8BITS_MASK);
-
- /* Mark all IRQs as handled */
- for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
- regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
- HISI_8BITS_MASK);
- }
-}
-
-static const struct regmap_config regmap_config = {
- .reg_bits = 16,
- .val_bits = BITS_PER_BYTE,
- .max_register = 0xffff,
- .fast_io = true
-};
-
-static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct hi6421_spmi_pmic *ddata;
- unsigned int virq;
- int ret, i;
-
- ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
- if (!ddata)
- return -ENOMEM;
-
- ddata->regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
- if (IS_ERR(ddata->regmap))
- return PTR_ERR(ddata->regmap);
-
- spin_lock_init(&ddata->lock);
-
- ddata->dev = dev;
-
- ddata->gpio = of_get_gpio(np, 0);
- if (ddata->gpio < 0)
- return ddata->gpio;
-
- if (!gpio_is_valid(ddata->gpio))
- return -EINVAL;
-
- ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
- if (ret < 0) {
- dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
- return ret;
- }
-
- ddata->irq = gpio_to_irq(ddata->gpio);
-
- hi6421_spmi_pmic_irq_init(ddata);
-
- ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
- if (!ddata->irqs)
- return -ENOMEM;
-
- ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
- &hi6421_spmi_domain_ops, ddata);
- if (!ddata->domain) {
- dev_err(dev, "Failed to create IRQ domain\n");
- return -ENODEV;
- }
-
- for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
- virq = irq_create_mapping(ddata->domain, i);
- if (!virq) {
- dev_err(dev, "Failed to map H/W IRQ\n");
- return -ENODEV;
- }
- ddata->irqs[i] = virq;
- }
-
- ret = devm_request_threaded_irq(dev,
- ddata->irq, hi6421_spmi_irq_handler,
- NULL,
- IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
- "pmic", ddata);
- if (ret < 0) {
- dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
- ret);
- return ret;
- }
-
- dev_set_drvdata(&pdev->dev, ddata);
-
- ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
- hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
- NULL, 0, NULL);
- if (ret < 0)
- dev_err(dev, "Failed to add child devices: %d\n", ret);
-
- return ret;
-}
-
-static const struct of_device_id pmic_spmi_id_table[] = {
- { .compatible = "hisilicon,hi6421-spmi" },
- { }
-};
-MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
-
-static struct spmi_driver hi6421_spmi_pmic_driver = {
- .driver = {
- .name = "hi6421-spmi-pmic",
- .of_match_table = pmic_spmi_id_table,
- },
- .probe = hi6421_spmi_pmic_probe,
-};
-module_spmi_driver(hi6421_spmi_pmic_driver);
-
-MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
-MODULE_LICENSE("GPL v2");
deleted file mode 100644
@@ -1,134 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon 6421v600 SPMI PMIC
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
- HiSilicon 6421v600 should be connected inside a MIPI System Power Management
- (SPMI) bus. It provides interrupts and power supply.
-
- The GPIO and interrupt settings are represented as part of the top-level PMIC
- node.
-
- The SPMI controller part is provided by
- Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
-
-properties:
- $nodename:
- pattern: "pmic@[0-9a-f]"
-
- compatible:
- const: hisilicon,hi6421v600-spmi
-
- reg:
- maxItems: 1
-
- '#interrupt-cells':
- const: 2
-
- interrupt-controller: true
-
- gpios:
- maxItems: 1
- description: GPIO used for IRQs
-
- regulators:
- type: object
-
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- patternProperties:
- '^ldo[0-9]+@[0-9a-f]$':
- type: object
-
- $ref: "/schemas/regulator/regulator.yaml#"
-
-required:
- - compatible
- - reg
- - regulators
-
-additionalProperties: false
-
-examples:
- - |
- /* pmic properties */
-
- pmic: pmic@0 {
- compatible = "hisilicon,hi6421-spmi";
- reg = <0 0>;
-
- #interrupt-cells = <2>;
- interrupt-controller;
- gpios = <&gpio28 0 0>;
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ldo3: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2000000>;
- regulator-boot-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <1900000>;
- regulator-boot-on;
- };
-
- ldo9: LDO9 {
- regulator-name = "ldo9";
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo15: LDO15 {
- regulator-name = "ldo15";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo16: LDO16 {
- regulator-name = "ldo16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldo17: LDO17 {
- regulator-name = "ldo17";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo33: LDO33 {
- regulator-name = "ldo33";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo34: LDO34 {
- regulator-name = "ldo34";
- regulator-min-microvolt = <2600000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
This driver is ready for mainstream. So, move it out of staging. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../mfd/hisilicon,hi6421-spmi-pmic.yaml | 134 ++++++++ MAINTAINERS | 7 + drivers/mfd/Kconfig | 16 + drivers/mfd/Makefile | 1 + drivers/mfd/hi6421-spmi-pmic.c | 311 ++++++++++++++++++ drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/hikey9xx/Kconfig | 19 -- drivers/staging/hikey9xx/Makefile | 3 - drivers/staging/hikey9xx/TODO | 5 - drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 311 ------------------ .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 134 -------- 12 files changed, 469 insertions(+), 475 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml create mode 100644 drivers/mfd/hi6421-spmi-pmic.c delete mode 100644 drivers/staging/hikey9xx/Kconfig delete mode 100644 drivers/staging/hikey9xx/Makefile delete mode 100644 drivers/staging/hikey9xx/TODO delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml