mbox series

[v2,00/14] usb: dwc3: Add new updates for DWC_usb31

Message ID cover.1515618218.git.thinhn@synopsys.com
Headers show
Series usb: dwc3: Add new updates for DWC_usb31 | expand

Message

Thinh Nguyen Jan. 10, 2018, 9:12 p.m. UTC 
This patch series adds new updates and some fixes for DWC_usb31.

Changes in v2:
 - Add another patch to the series to increase mass_storage max_speed
 - Separate "usb: dwc3: ep0: Reset TRB counter for ep0 IN" from series
 - Separate "usb: dwc3: gadget: Set maxpacket size for ep0 IN" from series
 - Use msleep() instead of mdelay() for SoftReset PHY sync delay
 - Rename new USB31 macros from DWC3_USB31_* to DWC31_*
 - Rename device properties and replace '_' with '-'
 - Minor fixes in the commit messages



Thinh Nguyen (14):
  usb: dwc3: Add SoftReset PHY synchonization delay
  usb: core: urb: Check SSP isoc ep comp descriptor
  usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
  usb: dwc3: Check IP revision for GTXFIFOSIZ
  usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields
  usb: dwc3: gadget: Check IP revision for GRXTHRCFG
  usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields
  usb: dwc3: Make TX/RX threshold configurable
  usb: dwc3: Check for ESS TX/RX threshold config
  usb: dwc3: Dump LSP and BMU debug info
  usb: dwc3: Track DWC_usb31 VERSIONTYPE
  usb: dwc3: Add disabling of start_transfer failure quirk
  usb: dwc3: Add workaround for isoc start transfer failure
  usb: gadget: mass_storage: Set max_speed to SSP

 Documentation/devicetree/bindings/usb/dwc3.txt |   7 +
 drivers/usb/core/urb.c                         |   8 +
 drivers/usb/dwc3/core.c                        |  72 ++++++++-
 drivers/usb/dwc3/core.h                        |  53 +++++++
 drivers/usb/dwc3/debugfs.c                     |   5 +
 drivers/usb/dwc3/gadget.c                      | 200 ++++++++++++++++++++++++-
 drivers/usb/gadget/legacy/mass_storage.c       |   2 +-
 7 files changed, 338 insertions(+), 9 deletions(-)