| Message ID | 20240414-cn9130-som-v3-0-350a67d44e0a@solid-run.com |
|---|---|
| Headers | show |
| Series | arm64: dts: add description for solidrun cn9130 som and clearfog boards | expand |
Am 14.04.24 um 14:58 schrieb Josua Mayer: > Add description for the SolidRun CN9131 SolidWAN, based on CN9130 SoM > with an extra communication processor on the carrier board. > > This board differentiates itself from CN9130 Clearfog by providing > additional SoC native network interfaces and pci buses: > 2x 10Gbps SFP+ > 4x 1Gbps RJ45 > 1x miniPCI-E > 1x m.2 b-key with sata, usb-2.0 and usb-3.0 > 1x m.2 m-key with pcie and usb-2.0 > 1x m.2 b-key with pcie, usb-2.0, usb-3.0 and 2x sim slots > 1x mpcie with pcie only > 2x type-a usb-2.0/3.0 > > Signed-off-by: Josua Mayer <josua@solid-run.com> > --- > arch/arm64/boot/dts/marvell/Makefile | 1 + > arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++ > 2 files changed, 654 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile > index 019f2251d696..16f9d7156d9f 100644 > --- a/arch/arm64/boot/dts/marvell/Makefile > +++ b/arch/arm64/boot/dts/marvell/Makefile > @@ -30,3 +30,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb > dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb > dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb > dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb > +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb > diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts > new file mode 100644 > index 000000000000..ba7dd55abfb4 > --- /dev/null > +++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts > @@ -0,0 +1,653 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2024 Josua Mayer <josua@solid-run.com> > + * > + * DTS for SolidRun CN9130 Clearfog Base. > + * > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > + > +#include "cn9130.dtsi" > +#include "cn9130-sr-som.dtsi" > + > +/* > + * Instantiate the external CP115 > + */ > + > +#define CP11X_NAME cp1 > +#define CP11X_BASE f4000000 > +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) > +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 > +#define CP11X_PCIE0_BASE f4600000 > +#define CP11X_PCIE1_BASE f4620000 > +#define CP11X_PCIE2_BASE f4640000 > + > +#include "armada-cp115.dtsi" > + > +#undef CP11X_NAME > +#undef CP11X_BASE > +#undef CP11X_PCIEx_MEM_BASE > +#undef CP11X_PCIEx_MEM_SIZE > +#undef CP11X_PCIE0_BASE > +#undef CP11X_PCIE1_BASE > +#undef CP11X_PCIE2_BASE > + This is not very pretty, but shared between all CN9313 designs. CN9132 designs will even have two of these with different addresses. Is this worth moving into a dtsi? I see two options then: 1. introduce cn9131.dtsi (which includes cn9130.dtsi). Boards then can simply include cn9131.dtsi and skip cn9130.dtsi 2. introduce a standalone cn9130-cp1.dtsi which only instantiates cp1, and does not include cn9130.dtsi. Boards should include everything they need, e.g. cn9130.dtsi + cn9130-cp1.dtsi + cn9130-cp2.dtsi
Am 14.04.24 um 14:58 schrieb Josua Mayer: > Add description for the SolidRun CN9131 SolidWAN, based on CN9130 SoM > with an extra communication processor on the carrier board. > > This board differentiates itself from CN9130 Clearfog by providing > additional SoC native network interfaces and pci buses: > 2x 10Gbps SFP+ > 4x 1Gbps RJ45 > 1x miniPCI-E > 1x m.2 b-key with sata, usb-2.0 and usb-3.0 > 1x m.2 m-key with pcie and usb-2.0 > 1x m.2 b-key with pcie, usb-2.0, usb-3.0 and 2x sim slots > 1x mpcie with pcie only > 2x type-a usb-2.0/3.0 > > Signed-off-by: Josua Mayer <josua@solid-run.com> > --- > arch/arm64/boot/dts/marvell/Makefile | 1 + > arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++ > 2 files changed, 654 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile > index 019f2251d696..16f9d7156d9f 100644 > --- a/arch/arm64/boot/dts/marvell/Makefile > +++ b/arch/arm64/boot/dts/marvell/Makefile > @@ -30,3 +30,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb > dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb > dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb > dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb > +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb > diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts cut > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&cp0_led_pins &cp1_led_pins>; > + > + /* for sfp-1 (J42) */ > + led-sfp1-activity { > + label = "sfp1"; > + gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_GREEN>; > + }; > + > + /* for sfp-1 (J42) */ > + led-sfp1-link { > + label = "sfp1"; > + gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_YELLOW>; > + }; > + > + /* (J28) */ > + led-sfp0-activity { > + label = "sfp0"; > + gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_GREEN>; > + }; > + > + /* (J28) */ > + led-sfp0-link { > + label = "sfp0"; > + gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_YELLOW>; > + }; > + }; > + Here I am uncertain what to put in the label. Each SFP has a single dual-color (3 terminals) LED, with one gpio controlling each colour. Colours are similar to RJ45 connectors (yellow, green), and are intended for the same purpose: link, activity.
On 14/04/2024 15:02, Josua Mayer wrote: > Am 14.04.24 um 14:58 schrieb Josua Mayer: >> Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro >> reference boards. >> >> The SoM has been designed as a pin-compatible replacement for the older >> Armada 388 based SoM. Therefore it supports the same boards and a >> similar feature set. >> >> Most notable upgrades: >> - 4x Cortex-A72 >> - 10Gbps SFP >> - Both eMMC and SD supported at the same time >> >> The developer first supporting this product at SolidRun decided to use >> different filenames for the DTBs: Armada 388 uses the full >> "clearfog" string while cn9130 uses the abbreviation "cf". >> This name is already hard-coded in pre-installed vendor u-boot and can >> not be changed easily. >> >> NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: >> CN9130 SoM has a different footprint from Armada 388 SoM. >> Components on the carrier board below the SoM may collide causing >> damage, such as on Clearfog Base. >> >> Signed-off-by: Josua Mayer <josua@solid-run.com> >> --- > > Previous version had received an ack from Krzysztof Kozlowski, > which I dropped because I made additional changes. > > To simplify review, please find below > the incremental changes from v2 to v3: If you send patches correctly, b4 gives diff, so no need for this diff here. Best regards, Krzysztof
On Sun, 14 Apr 2024 14:58:31 +0200, Josua Mayer wrote: > SolidRun CN9130 SoM is a mostly pin-comptible replacement for Armada 388 > SoM used in Clearfog and Clearfog Pro boards. > > 1. Add new binding for compatible strings closely matching the original. > > 2. Add device-tree includes for SoM and carrier shared design. > > 3. Add device-tree for both Clearfog Base and Pro. > > While dtbs_check is happy with LED descriptions behind dsa switch, > functionally they require supporting code by Andrew Lunn: > https://lore.kernel.org/r/20240401-v6-8-0-net-next-mv88e6xxx-leds-v4-v3-0-221b3fa55f78@lunn.ch > > NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: > CN9130 SoM has a different footprint from Armada 388 SoM. > Components on the carrier board below the SoM may collide causing > damage, such as on Clearfog Base. > > Signed-off-by: Josua Mayer <josua@solid-run.com> > --- > Changes in v3: > - picked up acked-by for dt-bindings > - skipped acked-by for dts because additional changes were made: > - moved legacy netdev aliases to carrier dts > - fix status property style errors > - add pinctrl for secondary spi chip-select on mikrobus header (& som) > - specify spi bus frequency limits for som > - Added CN9131 SolidWAN board > - Link to v2: https://lore.kernel.org/r/20240404-cn9130-som-v2-0-3af2229c7d2d@solid-run.com > > Changes in v2: > - rewrote dt bindings dropping unnecessary compatibles > (Reported-By: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>) > - added bindings for two additional boards (cn9131/9132) > support planned for the coming weeks, mostly serves > illustrational purposes, to understand cn913x variants > - cf-pro: add description for LEDs behind DSA switch > - cf-base: add description for LEDs behind PHYs > (Reported-By: Andrew Lunn <andrew@lunn.ch>) > - Link to v1: https://lore.kernel.org/r/20240321-cn9130-som-v1-0-711127a409ae@solid-run.com > > --- > Josua Mayer (4): > dt-bindings: arm64: marvell: add solidrun cn9130 som based boards > dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board > arm64: dts: add description for solidrun cn9130 som and clearfog boards > arm64: dts: add description for solidrun cn9131 solidwan board > > .../bindings/arm/marvell/armada-7k-8k.yaml | 18 + > arch/arm64/boot/dts/marvell/Makefile | 3 + > arch/arm64/boot/dts/marvell/cn9130-cf-base.dts | 178 ++++++ > arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts | 377 ++++++++++++ > arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 197 +++++++ > arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 160 +++++ > arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++ > 7 files changed, 1586 insertions(+) > --- > base-commit: 4cece764965020c22cff7665b18a012006359095 > change-id: 20240318-cn9130-som-848e86acb0ac > > Sincerely, > -- > Josua Mayer <josua@solid-run.com> > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y marvell/cn9130-cf-base.dtb marvell/cn9130-cf-pro.dtb marvell/cn9131-cf-solidwan.dtb' for 20240414-cn9130-som-v3-0-350a67d44e0a@solid-run.com: arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: ap807: $nodename:0: 'ap807' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f0000000: $nodename:0: 'config-space@f0000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f0000000: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f0000000: pmu: {'compatible': ['arm,cortex-a72-pmu'], 'interrupt-parent': [[2]], 'interrupts': [[17]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/odmi@300000: failed to match any schema with compatible: ['marvell,odmi-controller'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/gicp@3f0040: failed to match any schema with compatible: ['marvell,ap806-gicp'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0100: failed to match any schema with compatible: ['marvell,armada-8k-pic'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0200: failed to match any schema with compatible: ['marvell,ap806-sei'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/spi@510600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@6e0000: clocks: [[4, 4]] is too short from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@6e0000: clock-names: ['core'] is too short from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@6e0000: Unevaluated properties are not allowed ('dma-coherent' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@6f4000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: gpio@1040: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap807-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@6f8000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: ap807: $nodename:0: 'ap807' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f0000000: $nodename:0: 'config-space@f0000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f0000000: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f0000000: pmu: {'compatible': ['arm,cortex-a72-pmu'], 'interrupt-parent': [[2]], 'interrupts': [[17]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f8000/thermal-sensor@80: failed to match any schema with compatible: ['marvell,armada-ap807-thermal'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f8000/clock-cpu: failed to match any schema with compatible: ['marvell,ap807-cpu-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/odmi@300000: failed to match any schema with compatible: ['marvell,odmi-controller'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/gicp@3f0040: failed to match any schema with compatible: ['marvell,ap806-gicp'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0100: failed to match any schema with compatible: ['marvell,armada-8k-pic'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0200: failed to match any schema with compatible: ['marvell,ap806-sei'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/spi@510600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@6e0000: clocks: [[4, 4]] is too short from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@6e0000: clock-names: ['core'] is too short from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@6e0000: Unevaluated properties are not allowed ('dma-coherent' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@6f4000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: gpio@1040: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap807-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@6f8000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f8000/thermal-sensor@80: failed to match any schema with compatible: ['marvell,armada-ap807-thermal'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: cp0: $nodename:0: 'cp0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f8000/clock-cpu: failed to match any schema with compatible: ['marvell,ap807-cpu-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f2000000: $nodename:0: 'config-space@f2000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/phy@120000: failed to match any schema with compatible: ['marvell,comphy-cp110'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: ap807: $nodename:0: 'ap807' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: config-space@f0000000: $nodename:0: 'config-space@f0000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: config-space@f0000000: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: config-space@f0000000: pmu: {'compatible': ['arm,cortex-a72-pmu'], 'interrupt-parent': [[2]], 'interrupts': [[17]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000: failed to match any schema with compatible: ['marvell,cp110-icu'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@10: failed to match any schema with compatible: ['marvell,cp110-icu-nsr'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@50: failed to match any schema with compatible: ['marvell,cp110-icu-sei'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@440000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/system-controller@440000/clock: failed to match any schema with compatible: ['marvell,cp110-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: gpio@100: Unevaluated properties are not allowed ('gpio-ranges', 'sim-select-hog' were unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: gpio@140: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: cp0: $nodename:0: 'cp0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f2000000: $nodename:0: 'config-space@f2000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/system-controller@440000/pinctrl: failed to match any schema with compatible: ['marvell,cp115-standalone-pinctrl'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@400000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/phy@120000: failed to match any schema with compatible: ['marvell,comphy-cp110'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/system-controller@400000/thermal-sensor@70: failed to match any schema with compatible: ['marvell,armada-cp110-thermal'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: usb@500000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode', 'vbus-supply' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: usb@510000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: sata@540000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/odmi@300000: failed to match any schema with compatible: ['marvell,odmi-controller'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/spi@700600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/spi@700680: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/gicp@3f0040: failed to match any schema with compatible: ['marvell,ap806-gicp'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0100: failed to match any schema with compatible: ['marvell,armada-8k-pic'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0200: failed to match any schema with compatible: ['marvell,ap806-sei'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/trng@760000: failed to match any schema with compatible: ['marvell,armada-8k-rng', 'inside-secure,safexcel-eip76'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@780000: Unevaluated properties are not allowed ('dma-coherent' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: crypto@800000: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000: failed to match any schema with compatible: ['marvell,cp110-icu'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@10: failed to match any schema with compatible: ['marvell,cp110-icu-nsr'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/pcie@f2600000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@50: failed to match any schema with compatible: ['marvell,cp110-icu-sei'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@440000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/pcie@f2620000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/system-controller@440000/clock: failed to match any schema with compatible: ['marvell,cp110-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: gpio@100: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/pcie@f2640000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: gpio@140: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/spi@510600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/system-controller@440000/pinctrl: failed to match any schema with compatible: ['marvell,cp115-standalone-pinctrl'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@400000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/system-controller@400000/thermal-sensor@70: failed to match any schema with compatible: ['marvell,armada-cp110-thermal'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: mmc@6e0000: clocks: [[4, 4]] is too short from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: mmc@6e0000: clock-names: ['core'] is too short from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: mmc@6e0000: Unevaluated properties are not allowed ('dma-coherent' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: usb@500000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode', 'vbus-supply' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: usb@510000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: sata@540000: sata-port@1: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: system-controller@6f4000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/spi@700600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/spi@700680: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@1040: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap807-clock'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: system-controller@6f8000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/system-controller@6f8000/thermal-sensor@80: failed to match any schema with compatible: ['marvell,armada-ap807-thermal'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /ap807/config-space@f0000000/system-controller@6f8000/clock-cpu: failed to match any schema with compatible: ['marvell,ap807-cpu-clock'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/trng@760000: failed to match any schema with compatible: ['marvell,armada-8k-rng', 'inside-secure,safexcel-eip76'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@780000: Unevaluated properties are not allowed ('dma-coherent' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: crypto@800000: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/pcie@f2600000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/pcie@f2620000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/pcie@f2640000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: cp0: $nodename:0: 'cp0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: config-space@f2000000: $nodename:0: 'config-space@f2000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/phy@120000: failed to match any schema with compatible: ['marvell,comphy-cp110'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000: failed to match any schema with compatible: ['marvell,cp110-icu'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@10: failed to match any schema with compatible: ['marvell,cp110-icu-nsr'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@50: failed to match any schema with compatible: ['marvell,cp110-icu-sei'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: system-controller@440000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/system-controller@440000/clock: failed to match any schema with compatible: ['marvell,cp110-clock'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@100: Unevaluated properties are not allowed ('gpio-ranges', 'm2-full-card-power-off-hog', 'pcie0-0-w-disable-hog' were unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@140: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/system-controller@440000/pinctrl: failed to match any schema with compatible: ['marvell,cp115-standalone-pinctrl'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: system-controller@400000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/system-controller@400000/thermal-sensor@70: failed to match any schema with compatible: ['marvell,armada-cp110-thermal'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: usb@500000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: usb@510000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/spi@700600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/spi@700680: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@41: 'gpio-controller' is a required property from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@41: '#gpio-cells' is a required property from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: rtc@68: Unevaluated properties are not allowed ('reset-gpios' was unexpected) from schema $id: http://devicetree.org/schemas/rtc/st,m41t80.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/config-space@f2000000/trng@760000: failed to match any schema with compatible: ['marvell,armada-8k-rng', 'inside-secure,safexcel-eip76'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: mmc@780000: Unevaluated properties are not allowed ('dma-coherent' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: crypto@800000: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/pcie@f2600000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/pcie@f2620000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp0/pcie@f2640000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: cp1: $nodename:0: 'cp1' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: config-space@f4000000: $nodename:0: 'config-space@f4000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/phy@120000: failed to match any schema with compatible: ['marvell,comphy-cp110'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/interrupt-controller@1e0000: failed to match any schema with compatible: ['marvell,cp110-icu'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/interrupt-controller@1e0000/interrupt-controller@10: failed to match any schema with compatible: ['marvell,cp110-icu-nsr'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/interrupt-controller@1e0000/interrupt-controller@50: failed to match any schema with compatible: ['marvell,cp110-icu-sei'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: system-controller@440000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/system-controller@440000/clock: failed to match any schema with compatible: ['marvell,cp110-clock'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@100: Unevaluated properties are not allowed ('gpio-ranges', 'm2-full-card-power-off-hog-0', 'm2-full-card-power-off-hog-1' were unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: gpio@140: Unevaluated properties are not allowed ('gpio-ranges' was unexpected) from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/system-controller@440000/pinctrl: failed to match any schema with compatible: ['marvell,cp115-standalone-pinctrl'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: system-controller@400000: compatible: ['syscon', 'simple-mfd'] is too short from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/system-controller@400000/thermal-sensor@70: failed to match any schema with compatible: ['marvell,armada-cp110-thermal'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: usb@500000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: usb@510000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected) from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: sata@540000: sata-port@0: 'anyOf' conditional failed, one must be fixed: 'phys' is a required property 'target-supply' is a required property from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/spi@700600: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/spi@700680: failed to match any schema with compatible: ['marvell,armada-380-spi'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/config-space@f4000000/trng@760000: failed to match any schema with compatible: ['marvell,armada-8k-rng', 'inside-secure,safexcel-eip76'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: crypto@800000: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/pcie@f4600000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/pcie@f4620000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: /cp1/pcie@f4640000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie'] arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: sfp-0: 'los-gpio', 'mod-def0-gpio', 'tx-disable-gpio', 'tx-fault-gpio' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/sff,sfp.yaml# arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dtb: sfp-1: 'los-gpio', 'mod-def0-gpio', 'tx-disable-gpio', 'tx-fault-gpio' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/sff,sfp.yaml#
On Sun, Apr 14, 2024 at 01:18:56PM +0000, Josua Mayer wrote: > Am 14.04.24 um 14:58 schrieb Josua Mayer: > > Add description for the SolidRun CN9131 SolidWAN, based on CN9130 SoM > > with an extra communication processor on the carrier board. > > > > This board differentiates itself from CN9130 Clearfog by providing > > additional SoC native network interfaces and pci buses: > > 2x 10Gbps SFP+ > > 4x 1Gbps RJ45 > > 1x miniPCI-E > > 1x m.2 b-key with sata, usb-2.0 and usb-3.0 > > 1x m.2 m-key with pcie and usb-2.0 > > 1x m.2 b-key with pcie, usb-2.0, usb-3.0 and 2x sim slots > > 1x mpcie with pcie only > > 2x type-a usb-2.0/3.0 > > > > Signed-off-by: Josua Mayer <josua@solid-run.com> > > --- > > arch/arm64/boot/dts/marvell/Makefile | 1 + > > arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++ > > 2 files changed, 654 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile > > index 019f2251d696..16f9d7156d9f 100644 > > --- a/arch/arm64/boot/dts/marvell/Makefile > > +++ b/arch/arm64/boot/dts/marvell/Makefile > > @@ -30,3 +30,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb > > dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb > > dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb > > dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb > > +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb > > diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts > cut > > + leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&cp0_led_pins &cp1_led_pins>; > > + > > + /* for sfp-1 (J42) */ > > + led-sfp1-activity { > > + label = "sfp1"; > > + gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>; > > + color = <LED_COLOR_ID_GREEN>; > > + }; > > + > > + /* for sfp-1 (J42) */ > > + led-sfp1-link { > > + label = "sfp1"; > > + gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>; > > + color = <LED_COLOR_ID_YELLOW>; > > + }; > > + > > + /* (J28) */ > > + led-sfp0-activity { > > + label = "sfp0"; > > + gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>; > > + color = <LED_COLOR_ID_GREEN>; > > + }; > > + > > + /* (J28) */ > > + led-sfp0-link { > > + label = "sfp0"; > > + gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>; > > + color = <LED_COLOR_ID_YELLOW>; > > + }; > > + }; > > + > Here I am uncertain what to put in the label. > Each SFP has a single dual-color (3 terminals) LED, > with one gpio controlling each colour. > > Colours are similar to RJ45 connectors (yellow, green), > and are intended for the same purpose: link, activity. For the switch LEDs you used label = "LED10"; Does the silk screen have similar numbers for these LEDs? Andrew
On Sun, Apr 14, 2024 at 02:58:34PM +0200, Josua Mayer wrote: > Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro > reference boards. > > The SoM has been designed as a pin-compatible replacement for the older > Armada 388 based SoM. Therefore it supports the same boards and a > similar feature set. > > Most notable upgrades: > - 4x Cortex-A72 > - 10Gbps SFP > - Both eMMC and SD supported at the same time > > The developer first supporting this product at SolidRun decided to use > different filenames for the DTBs: Armada 388 uses the full > "clearfog" string while cn9130 uses the abbreviation "cf". > This name is already hard-coded in pre-installed vendor u-boot and can > not be changed easily. > > NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: > CN9130 SoM has a different footprint from Armada 388 SoM. > Components on the carrier board below the SoM may collide causing > damage, such as on Clearfog Base. > > Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
Am 22.04.24 um 15:37 schrieb Andrew Lunn: > On Sun, Apr 14, 2024 at 01:18:56PM +0000, Josua Mayer wrote: >> Am 14.04.24 um 14:58 schrieb Josua Mayer: >>> Add description for the SolidRun CN9131 SolidWAN, based on CN9130 SoM >>> with an extra communication processor on the carrier board. >>> >>> This board differentiates itself from CN9130 Clearfog by providing >>> additional SoC native network interfaces and pci buses: >>> 2x 10Gbps SFP+ >>> 4x 1Gbps RJ45 >>> 1x miniPCI-E >>> 1x m.2 b-key with sata, usb-2.0 and usb-3.0 >>> 1x m.2 m-key with pcie and usb-2.0 >>> 1x m.2 b-key with pcie, usb-2.0, usb-3.0 and 2x sim slots >>> 1x mpcie with pcie only >>> 2x type-a usb-2.0/3.0 >>> >>> Signed-off-by: Josua Mayer <josua@solid-run.com> >>> --- >>> arch/arm64/boot/dts/marvell/Makefile | 1 + >>> arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++ >>> 2 files changed, 654 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile >>> index 019f2251d696..16f9d7156d9f 100644 >>> --- a/arch/arm64/boot/dts/marvell/Makefile >>> +++ b/arch/arm64/boot/dts/marvell/Makefile >>> @@ -30,3 +30,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb >>> dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb >>> dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb >>> dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb >>> +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb >>> diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts >> cut >>> + leds { >>> + compatible = "gpio-leds"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&cp0_led_pins &cp1_led_pins>; >>> + >>> + /* for sfp-1 (J42) */ >>> + led-sfp1-activity { >>> + label = "sfp1"; >>> + gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>; >>> + color = <LED_COLOR_ID_GREEN>; >>> + }; >>> + >>> + /* for sfp-1 (J42) */ >>> + led-sfp1-link { >>> + label = "sfp1"; >>> + gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>; >>> + color = <LED_COLOR_ID_YELLOW>; >>> + }; >>> + >>> + /* (J28) */ >>> + led-sfp0-activity { >>> + label = "sfp0"; >>> + gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>; >>> + color = <LED_COLOR_ID_GREEN>; >>> + }; >>> + >>> + /* (J28) */ >>> + led-sfp0-link { >>> + label = "sfp0"; >>> + gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>; >>> + color = <LED_COLOR_ID_YELLOW>; >>> + }; >>> + }; >>> + >> Here I am uncertain what to put in the label. >> Each SFP has a single dual-color (3 terminals) LED, >> with one gpio controlling each colour. >> >> Colours are similar to RJ45 connectors (yellow, green), >> and are intended for the same purpose: link, activity. > For the switch LEDs you used label = "LED10"; Does the silk screen > have similar numbers for these LEDs? Correct, on CN9130 Clearfog Pro DSA switch, all LEDs are labeled individually on the silk screen. The SolidWAN SFP leds are dual-colour leds with 3 terminals: anode to 3.3V, 2x cathode to gpio-controlled transistors. They are labeled on the silk-screen as "LED9", "LED10". Duplicate labels are not great, is there a better way? old style "LED9:green" e.g. ...?
> >> Colours are similar to RJ45 connectors (yellow, green), > >> and are intended for the same purpose: link, activity. > > For the switch LEDs you used label = "LED10"; Does the silk screen > > have similar numbers for these LEDs? > Correct, on CN9130 Clearfog Pro DSA switch, all LEDs are labeled > individually on the silk screen. > > The SolidWAN SFP leds are dual-colour leds with 3 terminals: > anode to 3.3V, 2x cathode to gpio-controlled transistors. > They are labeled on the silk-screen as "LED9", "LED10". > > Duplicate labels are not great, is there a better way? > old style "LED9:green" e.g. ...? So you have copper LEDs and SFP LEDs, each with the same silk screen label? Maybe put 'copper' and 'sfp' as a prefix into the label? Andrew
Am 26.04.24 um 20:18 schrieb Andrew Lunn: >>>> Colours are similar to RJ45 connectors (yellow, green), >>>> and are intended for the same purpose: link, activity. >>> For the switch LEDs you used label = "LED10"; Does the silk screen >>> have similar numbers for these LEDs? >> Correct, on CN9130 Clearfog Pro DSA switch, all LEDs are labeled >> individually on the silk screen. >> >> The SolidWAN SFP leds are dual-colour leds with 3 terminals: >> anode to 3.3V, 2x cathode to gpio-controlled transistors. >> They are labeled on the silk-screen as "LED9", "LED10". >> >> Duplicate labels are not great, is there a better way? >> old style "LED9:green" e.g. ...? > So you have copper LEDs and SFP LEDs, each with the same silk screen > label? Maybe put 'copper' and 'sfp' as a prefix into the label? No, not quite. We have 2x SFP Connectors. On the bottom side of PCB immediately below each connector is a single LED (as in physical component), each with a silk-screen label. "J28"/"SFP 0": "LED10" "J42"/"SFP 1": "LED9" The problem is that these leds are each two leds in single-package, which is why I put 4 led nodes in dts, two labeled "sfp-0", other two "sfp-1". But I don't think this duplication of label in dts is a good idea.
On Fri, Apr 26, 2024 at 06:51:02PM +0000, Josua Mayer wrote: > Am 26.04.24 um 20:18 schrieb Andrew Lunn: > >>>> Colours are similar to RJ45 connectors (yellow, green), > >>>> and are intended for the same purpose: link, activity. > >>> For the switch LEDs you used label = "LED10"; Does the silk screen > >>> have similar numbers for these LEDs? > >> Correct, on CN9130 Clearfog Pro DSA switch, all LEDs are labeled > >> individually on the silk screen. > >> > >> The SolidWAN SFP leds are dual-colour leds with 3 terminals: > >> anode to 3.3V, 2x cathode to gpio-controlled transistors. > >> They are labeled on the silk-screen as "LED9", "LED10". > >> > >> Duplicate labels are not great, is there a better way? > >> old style "LED9:green" e.g. ...? > > So you have copper LEDs and SFP LEDs, each with the same silk screen > > label? Maybe put 'copper' and 'sfp' as a prefix into the label? > > No, not quite. > > We have 2x SFP Connectors. > On the bottom side of PCB immediately below each connector is > a single LED (as in physical component), each with a silk-screen label. > > "J28"/"SFP 0": "LED10" > "J42"/"SFP 1": "LED9" > > The problem is that these leds are each two leds in single-package, Ah! Sorry, you clearly said they were dual-colour. > which is why I put 4 led nodes in dts, two labeled "sfp-0", > other two "sfp-1". > But I don't think this duplication of label in dts is a good idea. Agreed. Then i would use the colour as a postfix. Andrew
SolidRun CN9130 SoM is a mostly pin-comptible replacement for Armada 388 SoM used in Clearfog and Clearfog Pro boards. 1. Add new binding for compatible strings closely matching the original. 2. Add device-tree includes for SoM and carrier shared design. 3. Add device-tree for both Clearfog Base and Pro. While dtbs_check is happy with LED descriptions behind dsa switch, functionally they require supporting code by Andrew Lunn: https://lore.kernel.org/r/20240401-v6-8-0-net-next-mv88e6xxx-leds-v4-v3-0-221b3fa55f78@lunn.ch NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: CN9130 SoM has a different footprint from Armada 388 SoM. Components on the carrier board below the SoM may collide causing damage, such as on Clearfog Base. Signed-off-by: Josua Mayer <josua@solid-run.com> --- Changes in v3: - picked up acked-by for dt-bindings - skipped acked-by for dts because additional changes were made: - moved legacy netdev aliases to carrier dts - fix status property style errors - add pinctrl for secondary spi chip-select on mikrobus header (& som) - specify spi bus frequency limits for som - Added CN9131 SolidWAN board - Link to v2: https://lore.kernel.org/r/20240404-cn9130-som-v2-0-3af2229c7d2d@solid-run.com Changes in v2: - rewrote dt bindings dropping unnecessary compatibles (Reported-By: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>) - added bindings for two additional boards (cn9131/9132) support planned for the coming weeks, mostly serves illustrational purposes, to understand cn913x variants - cf-pro: add description for LEDs behind DSA switch - cf-base: add description for LEDs behind PHYs (Reported-By: Andrew Lunn <andrew@lunn.ch>) - Link to v1: https://lore.kernel.org/r/20240321-cn9130-som-v1-0-711127a409ae@solid-run.com --- Josua Mayer (4): dt-bindings: arm64: marvell: add solidrun cn9130 som based boards dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board arm64: dts: add description for solidrun cn9130 som and clearfog boards arm64: dts: add description for solidrun cn9131 solidwan board .../bindings/arm/marvell/armada-7k-8k.yaml | 18 + arch/arm64/boot/dts/marvell/Makefile | 3 + arch/arm64/boot/dts/marvell/cn9130-cf-base.dts | 178 ++++++ arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts | 377 ++++++++++++ arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 197 +++++++ arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 160 +++++ arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++ 7 files changed, 1586 insertions(+) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240318-cn9130-som-848e86acb0ac Sincerely,