mbox series

[0/3] Fix Versa3 clock mapping

Message ID 20230802122510.275420-1-biju.das.jz@bp.renesas.com
Headers show
Series Fix Versa3 clock mapping | expand

Message

Biju Das Aug. 2, 2023, 12:25 p.m. UTC 
According to Table 3. ("Output Source") in the 5P35023 datasheet,
the output clock mapping should be 0=REF, 1=SE1, 2=SE2, 3=SE3,
4=DIFF1, 5=DIFF2. But the code uses inverse.

This patch series aims to document clock-output-names in bindings and
fix the mapping in driver.

Biju Das (3):
  dt-bindings: clock: versaclock3: Document clock-output-names
  clk: vc3: Fix output clock mapping
  arm64: dts: renesas: rz-smarc-common: Use versa3 clk for audio mclk

 .../bindings/clock/renesas,5p35023.yaml       | 14 ++--
 .../boot/dts/renesas/rz-smarc-common.dtsi     | 14 ++--
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  | 23 +++++++
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 23 +++++++
 arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi | 27 ++++++++
 drivers/clk/clk-versaclock3.c                 | 68 +++++++++----------
 6 files changed, 124 insertions(+), 45 deletions(-)