mbox series

[v11,0/3] Add minimal MT8365 and MT8365-EVK support

Message ID 20230309213501.794764-1-bero@baylibre.com
Headers show
Series Add minimal MT8365 and MT8365-EVK support | expand

Message

Bernhard Rosenkränzer March 9, 2023, 9:34 p.m. UTC 
v11:
  - Fix typo in systimer (Thanks Angelo)

v10:
  - Fix systimer properties (Thanks Amjad)
  - Drop components of the patchset that have already been merged

v9:
  - Fix a regression in v8 that broke the USB port
  - Remove superfluous include in mt8365.dtsi
  - Fix some naming issues pointed out by dtbs_check

v8:
  - Add binding descriptions for mediatek,mt8365-systimer and
    mediatek,mt8365-uart
  - Specify ranges with parameters for u3phy

Tested-by: Kevin Hilman <khilman@baylibre.com>

v7:
  - Update GIC information in mt8365.dtsi (thanks to Marc Zyngier for
    pointing out the problem)
  - Adjust the timer to match the updated GIC information

v6:
  - Add systimer in mt8365.dtsi
  - Add I/D caches and L2 cache details in mt8365.dtsi
  - Move bl31_secmon_reserved from mt8365.dtsi to mt8365-evk.dts
  - Fix inconsistent indentation in mt8365-pinctrl example
  - Further mt8365.dtsi cleanups
  - Submit to additional maintainers spotted by get_maintainer.pl

v5:
  - Reorder top-level entries in mediatek,mt8365-pinctrl.yaml to match
    example-schema
  - Use consistent quotes

v4:
  - Remove pins-are-numbered references that have been holding things up
    now that the patches removing it from dt-bindings have landed in linux-next

v3:
  - Remove a number of components that are not yet supported (they will
    come back alongside the corresponding drivers)
  - Address issues found by dt_binding_check (mostly fixing pinctrl
    bindings)
  - Address issues pointed out in comments
  - Reorder patches

v2:
  - Add missing dt-bindings documentation
  - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski


Bernhard Rosenkränzer (2):
  dt-bindings: irq: mtk, sysirq: add support for mt8365
  dt-bindings: serial: mediatek,uart: add MT8365

Fabien Parent (1):
  arm64: dts: mediatek: Initial mt8365-evk support

 .../interrupt-controller/mediatek,sysirq.txt  |   1 +
 .../bindings/serial/mediatek,uart.yaml        |   1 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 168 ++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 377 ++++++++++++++++++
 5 files changed, 548 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

Comments

Kevin Hilman March 21, 2023, 10:51 a.m. UTC | #1 
Bernhard Rosenkränzer <bero@baylibre.com> writes:

> From: Fabien Parent <fparent@baylibre.com>
>
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> [aouledameur@baylibre.com: Fix systimer properties]
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Tested (again) and things are working well.  This is the last patch
remaining to be merged.  As soon as this lands in linux-next, I'll add
this board to my KernelCI lab.

Kevin
Matthias Brugger March 22, 2023, 2:41 p.m. UTC | #2 
On 21/03/2023 11:51, Kevin Hilman wrote:
> Bernhard Rosenkränzer <bero@baylibre.com> writes:
> 
>> From: Fabien Parent <fparent@baylibre.com>
>>
>> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
>> board, allowing the board to boot to initramfs with serial port I/O.
>>
>> Signed-off-by: Fabien Parent <fparent@baylibre.com>
>> [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
>> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
>> [aouledameur@baylibre.com: Fix systimer properties]
>> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
>> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
>> Tested-by: Kevin Hilman <khilman@baylibre.com>
>> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> 
> Tested (again) and things are working well.  This is the last patch
> remaining to be merged.  As soon as this lands in linux-next, I'll add
> this board to my KernelCI lab.
> 

Applied now, thanks for testing. This should show up in linux-next in the next 
couple of days.

Regards,
Matthias
Laurent Pinchart Oct. 16, 2023, 1:48 p.m. UTC | #3 
Hello,

A bit of a late reply, but I've just noticed an issue related to this
patch.

On Thu, Mar 09, 2023 at 10:35:01PM +0100, Bernhard Rosenkränzer wrote:
> From: Fabien Parent <fparent@baylibre.com>
> 
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
> Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> [aouledameur@baylibre.com: Fix systimer properties]
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>  arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 168 +++++++++
>  arch/arm64/boot/dts/mediatek/mt8365.dtsi    | 377 ++++++++++++++++++++
>  3 files changed, 546 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

[snip]

> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> new file mode 100644
> index 0000000000000..351197c453c91
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -0,0 +1,377 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * (C) 2018 MediaTek Inc.
> + * Copyright (C) 2022 BayLibre SAS
> + * Fabien Parent <fparent@baylibre.com>
> + * Bernhard Rosenkränzer <bero@baylibre.com>
> + */
> +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +
> +/ {

[snip]

> +	soc {

[snip]

> +		infracfg: syscon@10001000 {
> +			compatible = "mediatek,mt8365-infracfg", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};

[snip]

> +		infracfg_nao: infracfg@1020e000 {
> +			compatible = "mediatek,mt8365-infracfg", "syscon";
> +			reg = <0 0x1020e000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};

These two nodes cause the infracfg clocks to be registered twice, with
the second probe of the clk-mt8365 driver failing with -EEXIST.

[snip]

> +	};

[snip]

> +};
Laurent Pinchart Oct. 16, 2023, 1:49 p.m. UTC | #4 
On Mon, Oct 16, 2023 at 04:48:06PM +0300, Laurent Pinchart wrote:
> Hello,
> 
> A bit of a late reply, but I've just noticed an issue related to this
> patch.
> 
> On Thu, Mar 09, 2023 at 10:35:01PM +0100, Bernhard Rosenkränzer wrote:
> > From: Fabien Parent <fparent@baylibre.com>
> > 
> > This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> > board, allowing the board to boot to initramfs with serial port I/O.
> > 
> > Signed-off-by: Fabien Parent <fparent@baylibre.com>
> > [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
> > Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
> > [aouledameur@baylibre.com: Fix systimer properties]
> > Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> > Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
> > Tested-by: Kevin Hilman <khilman@baylibre.com>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/Makefile       |   1 +
> >  arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 168 +++++++++
> >  arch/arm64/boot/dts/mediatek/mt8365.dtsi    | 377 ++++++++++++++++++++
> >  3 files changed, 546 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
> 
> [snip]
> 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > new file mode 100644
> > index 0000000000000..351197c453c91
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > @@ -0,0 +1,377 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * (C) 2018 MediaTek Inc.
> > + * Copyright (C) 2022 BayLibre SAS
> > + * Fabien Parent <fparent@baylibre.com>
> > + * Bernhard Rosenkränzer <bero@baylibre.com>
> > + */
> > +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/phy/phy.h>
> > +
> > +/ {
> 
> [snip]
> 
> > +	soc {
> 
> [snip]
> 
> > +		infracfg: syscon@10001000 {
> > +			compatible = "mediatek,mt8365-infracfg", "syscon";
> > +			reg = <0 0x10001000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> 
> [snip]
> 
> > +		infracfg_nao: infracfg@1020e000 {
> > +			compatible = "mediatek,mt8365-infracfg", "syscon";
> > +			reg = <0 0x1020e000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> 
> These two nodes cause the infracfg clocks to be registered twice, with
> the second probe of the clk-mt8365 driver failing with -EEXIST.

These are the messages printed by v6.6-rc6:

[    0.540254] Failed to register clk ifr_pmic_tmr: -EEXIST
[    0.541003] clk-mt8365: probe of 1020e000.infracfg failed with error -17

> [snip]
> 
> > +	};
> 
> [snip]
> 
> > +};