mbox series

[0/2] usb: misc: add support for microchip,usb2244 USB-SD controller

Message ID 20211024180628.2992108-1-piyush.mehta@xilinx.com
Headers show
Series usb: misc: add support for microchip,usb2244 USB-SD controller | expand


Piyush Mehta Oct. 24, 2021, 6:06 p.m. UTC
Microchip's USB224x family of Hi-Speed USB 2.0 flash media card
controllers provide an ultra-fast interface between a USB host
controller and flash media cards.

This patch adds a GPIO based usb-sd reset for USB2244 USB2 ultra
fast SD controller. This usb2244 driver trigger sd reset signal
after soft reset or core Reset. The SD needs to be resetted after
completion of phy initialization. After the toggling of gpio,
controller gets out form reset.

As part of the reset, sets the direction of the pin to output before
toggling the pin. Delay of microseconds is added in between low and
high to meet the setup and hold time requirement of the reset.

Piyush Mehta (2):
  dt-bindings: usb: misc: Add binding for Microchip usb2244 Controller
  usb: misc: usb244: add support for USB2 ultra fast sd controller

 .../devicetree/bindings/usb/microchip,usb2244.yaml | 43 ++++++++++++++
 drivers/usb/misc/Kconfig                           |  8 +++
 drivers/usb/misc/Makefile                          |  1 +
 drivers/usb/misc/usb2244.c                         | 69 ++++++++++++++++++++++
 4 files changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb2244.yaml
 create mode 100644 drivers/usb/misc/usb2244.c