mbox series

[v3,0/3] media: i2c: Introduce driver for the TW9900 decoder

Message ID 20201222160407.501586-1-maxime.chevallier@bootlin.com
Headers show
Series media: i2c: Introduce driver for the TW9900 decoder | expand


Maxime Chevallier Dec. 22, 2020, 4:04 p.m. UTC
Hello everyone,

This is the third version of the series adding support for the Techwell
TW9900 multi standard decoder. It's a pretty simple decoder compared to
the TW9910, since it doesn't have a built-in scaler/crop engine.

This V3 addresses coding-style issues reported by Paul, and fixes the
example binding.

Any feedback is appreciated,



Maxime Chevallier (3):
  dt-bindings: vendor-prefixes: Add techwell vendor prefix
  media: dt-bindings: media: i2c: Add bindings for TW9900
  media: i2c: Introduce a driver for the Techwell TW9900 decoder

 .../devicetree/bindings/media/i2c/tw9900.yaml |  60 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/media/i2c/Kconfig                     |  11 +
 drivers/media/i2c/Makefile                    |   1 +
 drivers/media/i2c/tw9900.c                    | 617 ++++++++++++++++++
 6 files changed, 697 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/tw9900.yaml
 create mode 100644 drivers/media/i2c/tw9900.c