mbox series

[v2,0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

Message ID 20200303101722.26052-1-rogerq@ti.com
Headers show
Series arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support | expand

Message

Roger Quadros March 3, 2020, 10:17 a.m. UTC 
Hi Tero,

This series adds SERDES PHY support. The relevant PHY driver
and bindings are already in v5.6.

It also adds Super-Speed support to the Type-C port on the EVM.
The USB Type-C related driver support is in v5.6.

Please queue this for v5.7 if no objections. Thanks.

cheers,
-roger

Changelog:
v2:
- Addressed Rob's comments.
- Changed type-C debounce delay from 300ms to 700ms as 300ms is not
sufficient on EVM.


Kishon Vijay Abraham I (3):
  dt-bindings: syscon: Add TI's J721E specific compatible string
  arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
  arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select
    SERDES lane mux

Roger Quadros (3):
  arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
  arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
  arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
    line

 .../devicetree/bindings/mfd/syscon.yaml       |   1 +
 .../dts/ti/k3-j721e-common-proc-board.dts     |  33 ++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 275 ++++++++++++++++++
 include/dt-bindings/mux/mux-j721e-wiz.h       |  53 ++++
 4 files changed, 360 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h