Message ID | 20190614081724.13366-1-yibin.gong@nxp.com |
---|---|
Headers | show |
Series | add edma2 for i.mx7ulp | expand |
On 14-06-19, 16:17, yibin.gong@nxp.com wrote: > From: Robin Gong <yibin.gong@nxp.com> > > There are some differences between vf610 and next i.mx7ulp. Put such > differences into static driver data for distiguish easily at driver Typo distiguish Though I tried to apply 1-5 it doesnt apply for me, can you rebase and resend Thanks
Okay, will correct it and send v5 after rebase. >On 25-06-19, 16:17, Vinod Koul wrote: > On 14-06-19, 16:17, yibin.gong@nxp.com wrote: > > From: Robin Gong <yibin.gong@nxp.com> > > > > There are some differences between vf610 and next i.mx7ulp. Put such > > differences into static driver data for distiguish easily at driver > > Typo distiguish > > Though I tried to apply 1-5 it doesnt apply for me, can you rebase and resend > > Thanks > > -- > ~Vinod
From: Robin Gong <yibin.gong@nxp.com> This patch set add new version of edma for i.mx7ulp, the main changes are as belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels For the first change, need modify fsl-edma-common.c and mcf-edma, so create the first two patches to prepare without any function impact. For the third change, need request single irq for every channel with the legacy handler. But actually 2 dma channels share one interrupt(16 channel interrupts, but 32 channels.),ch0/ch16,ch1/ch17... For now, just simply request irq without IRQF_SHARED flag, since 16 channels are enough on i.mx7ulp whose M4 domain own some peripherals. change from v1: 1. check .data of 'of_device_id' in probe instead of compatible name. change from v2: 1. move the difference between edma and edma2 into driver data so that no need version checking in fsl-edma.c. change from v3: 1. remove duplicated 'version' and 'dmamux_nr' in 'struct fsl_edma_engine' since they are included in drvdata already. 2. downgrade print log level. 3. address some minor indent issues raised by Vinod. Robin Gong (6): dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma-common: version check for v2 instead dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma: add i.mx7ulp edma2 version support ARM: dts: imx7ulp: add edma device node Documentation/devicetree/bindings/dma/fsl-edma.txt | 44 ++++++++- arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++ drivers/dma/fsl-edma-common.c | 83 ++++++++++------ drivers/dma/fsl-edma-common.h | 14 ++- drivers/dma/fsl-edma.c | 109 ++++++++++++++++++--- drivers/dma/mcf-edma.c | 11 ++- 6 files changed, 239 insertions(+), 50 deletions(-)