mbox series

[v3,0/3] meson-gpio-irqc: Add support for the Meson-G12A SoC

Message ID 20190608190411.14018-1-martin.blumenstingl@googlemail.com
Headers show
Series meson-gpio-irqc: Add support for the Meson-G12A SoC | expand

Message

Martin Blumenstingl June 8, 2019, 7:04 p.m. UTC 
This series adds GPIO interrupt controller support for Meson-G12A SoCs.
Although the total number of pins is the same as the Meson-AXG SoC, the
GPIO banks and IRQ numbers are different. Add a new compatible string
to avoid confusion when using it.

I am re-sending this update because v2 looked good in my opinion (Xingyu
Chen did good work here) but it never made it into mainline.


Changes since v1 at [1]:
- share the device data with Meson-AXG

Changes since v2 at [2]:
- dropped "Change-Id" from patch #2
- added .dts patch #3 - this should go through Kevin's linux-amlogic
  tree. if required I can re-send it in a separate series


[1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
[2] https://lore.kernel.org/patchwork/cover/1021232/


Martin Blumenstingl (1):
  arm64: dts: meson: g12a: add the GPIO interrupt controller

Xingyu Chen (2):
  dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
  irqchip/meson-gpio: Add support for Meson-G12A SoC

 .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
 drivers/irqchip/irq-meson-gpio.c                         | 1 +
 3 files changed, 11 insertions(+)

Comments

Marc Zyngier June 11, 2019, 11:20 a.m. UTC | #1 
On 08/06/2019 20:04, Martin Blumenstingl wrote:
> This series adds GPIO interrupt controller support for Meson-G12A SoCs.
> Although the total number of pins is the same as the Meson-AXG SoC, the
> GPIO banks and IRQ numbers are different. Add a new compatible string
> to avoid confusion when using it.
> 
> I am re-sending this update because v2 looked good in my opinion (Xingyu
> Chen did good work here) but it never made it into mainline.
> 
> 
> Changes since v1 at [1]:
> - share the device data with Meson-AXG
> 
> Changes since v2 at [2]:
> - dropped "Change-Id" from patch #2
> - added .dts patch #3 - this should go through Kevin's linux-amlogic
>   tree. if required I can re-send it in a separate series
> 
> 
> [1] https://lore.kernel.org/lkml/20181203061324.36248-1-xingyu.chen@amlogic.com
> [2] https://lore.kernel.org/patchwork/cover/1021232/
> 
> 
> Martin Blumenstingl (1):
>   arm64: dts: meson: g12a: add the GPIO interrupt controller
> 
> Xingyu Chen (2):
>   dt-bindings: interrupt-controller: New binding for Meson-G12A SoC
>   irqchip/meson-gpio: Add support for Meson-G12A SoC
> 
>  .../interrupt-controller/amlogic,meson-gpio-intc.txt     | 1 +
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi              | 9 +++++++++
>  drivers/irqchip/irq-meson-gpio.c                         | 1 +
>  3 files changed, 11 insertions(+)
> 

I've taken patches 1 and 2 into the irqchip tree. Please route patch 3
though armsoc.

Thanks,

	M.