mbox series

[v1,0/5] add quartz load support to NXP rtc drivers

Message ID 20180907193508.24974-1-sam@ravnborg.org
Headers show
Series add quartz load support to NXP rtc drivers | expand

Message

Sam Ravnborg Sept. 7, 2018, 7:35 p.m. UTC 
The current rtc drivers for NXP pcf8523 and pcf85063
have different configuration of the quartz load.

pcf8523 hardcode the quartz load to 12.5 Pf
pcf85063 uses the reset default of 7 pF

Introduce a new property to the bindings for the two
rtc devices to specify if the quartz load is 12.5 pF.

Update all in-kernel DT files using the pcf8523 to specify this property.
And finally update the drivers to support the property.

NOTE:
This has the side-effect that any users of the
pcf8523 driver using out-of-tree DTS files needs to
add the new property to get the same behaviour as before.

	Sam

Søren Andersen (5):
      dt-binding: rtci-pcf8523: add binding with quartz_load property
      dt-binding: rtc-pcf85063: add binding with quartz load property
      dts: add nxp,quartz_load_12.5pf to all pcf8523 nodes
      rtc: pcf8523: add quartz load configuration from DT
      rtc: pcf85063: add quartz load configuration from DT

 .../devicetree/bindings/rtc/nxp,pcf85063.txt       | 19 +++++++++++++
 .../devicetree/bindings/rtc/nxp,pcf8523.txt        | 19 +++++++++++++
 .../devicetree/bindings/trivial-devices.txt        |  2 --
 arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts       |  1 +
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts         |  1 +
 arch/arm/boot/dts/imx6q-h100.dts                   |  1 +
 arch/arm/boot/dts/imx6q-novena.dts                 |  1 +
 arch/arm/boot/dts/imx6qdl-cubox-i.dtsi             |  1 +
 arch/arm/boot/dts/imx6qdl-hummingboard.dtsi        |  1 +
 arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi       |  1 +
 drivers/rtc/rtc-pcf85063.c                         | 31 ++++++++++++++++++++++
 drivers/rtc/rtc-pcf8523.c                          |  6 ++---
 12 files changed, 79 insertions(+), 5 deletions(-)