@@ -34,6 +34,7 @@ After building, you should obtain this tree:
+-- rpi-firmware
| +-- bootcode.bin
| +-- config.txt
+ | +-- cmdline.txt
| +-- fixup.dat
| `-- start.elf
`-- zImage
@@ -49,6 +50,7 @@ Your SDCard must have its first partition using fat32 and marked bootable.
At the root of the partition, the RaspberryPi must find the following files:
* bootcode.bin
+ * cmdline.txt
* config.txt
* fixup.dat
* start.elf
@@ -78,6 +80,7 @@ After building, you should obtain this tree:
+-- rootfs.tar
+-- rpi-firmware
| +-- bootcode.bin
+ | +-- cmdline.txt
| +-- config.txt
| +-- fixup.dat
| `-- start.elf
@@ -97,6 +100,7 @@ The first partition will contain everything used to boot the RaspberryPi.
You must copy theses files at the root of partition:
* bootcode.bin
+ * cmdline.txt
* config.txt
* fixup.dat
* start.elf
@@ -13,8 +13,10 @@ choice
bool "Firmware to boot"
default BR2_PACKAGE_RPI_FIRMWARE_DEFAULT
help
- There are two different firmware files:
+ There are three different firmware files:
- the default firmware, that enables standard GPU features;
+ - the extended firmware, that enables additional GPU features
+ (eg. more audio/video codecs);
- the cut-down firmware, for emergency situations, with only
features required to boot a Linux kernel.
@@ -23,6 +25,12 @@ config BR2_PACKAGE_RPI_FIRMWARE_DEFAULT
help
The default firmware, that enables standard GPU features.
+config BR2_PACKAGE_RPI_FIRMWARE_X
+ bool "extended ('x', more codecs)"
+ help
+ The extended firmware, that enables additional GPU features
+ (eg. more audio/video codecs).
+
config BR2_PACKAGE_RPI_FIRMWARE_CD
bool "cut-down ('cd', emergency)"
help
@@ -34,6 +42,7 @@ endchoice
config BR2_PACKAGE_RPI_FIRMWARE_BOOT
string
default "" if BR2_PACKAGE_RPI_FIRMWARE_DEFAULT
+ default "_x" if BR2_PACKAGE_RPI_FIRMWARE_X
default "_cd" if BR2_PACKAGE_RPI_FIRMWARE_CD
config BR2_PACKAGE_RPI_FIRMWARE_ALL
@@ -44,6 +53,7 @@ config BR2_PACKAGE_RPI_FIRMWARE_ALL
be installed, so you can later switch to an alternate firmware.
The firmware files will be installed thusly:
- the 'default' will be denoted with '_default' in filenames
+ - the 'extended' will be denoted with '_x' in filenames
- the 'cut-down' will be denoted with '_cd' in filenames
If you say 'n', then only the firmware you choose above will be
new file mode 100644
@@ -0,0 +1 @@
+dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootwait
@@ -12,4 +12,3 @@ gpu_mem_256=100
gpu_mem_512=100
sdram_freq=400
over_voltage=0
-cmdline="dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootwait"
@@ -4,7 +4,7 @@
#
#############################################################
-RPI_FIRMWARE_VERSION = 76d0ac38f16b6343c6155c80db1e4758b3a5838a
+RPI_FIRMWARE_VERSION = 57b604530d3c86edd5093d2a58c9d026fdfa7a7a
RPI_FIRMWARE_SITE = http://github.com/raspberrypi/firmware/tarball/master
RPI_FIRMWARE_LICENSE = BSD-3c
RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
@@ -14,13 +14,16 @@ define RPI_FIRMWARE_INSTALL_TARGET_CMDS_BASE
$(INSTALL) -D -m 0644 $(@D)/boot/start$(BR2_PACKAGE_RPI_FIRMWARE_BOOT).elf $(BINARIES_DIR)/rpi-firmware/start.elf
$(INSTALL) -D -m 0644 $(@D)/boot/fixup$(BR2_PACKAGE_RPI_FIRMWARE_BOOT).dat $(BINARIES_DIR)/rpi-firmware/fixup.dat
$(INSTALL) -D -m 0644 package/rpi-firmware/config.txt $(BINARIES_DIR)/rpi-firmware/config.txt
+ $(INSTALL) -D -m 0644 package/rpi-firmware/cmdline.txt $(BINARIES_DIR)/rpi-firmware/cmdline.txt
endef
ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_ALL),y)
define RPI_FIRMWARE_INSTALL_TARGET_CMDS_EXTRA
$(INSTALL) -D -m 0644 $(@D)/boot/start.elf $(BINARIES_DIR)/rpi-firmware/start_default.elf
+ $(INSTALL) -D -m 0644 $(@D)/boot/start_x.elf $(BINARIES_DIR)/rpi-firmware/start_x.elf
$(INSTALL) -D -m 0644 $(@D)/boot/start_cd.elf $(BINARIES_DIR)/rpi-firmware/start_cd.elf
$(INSTALL) -D -m 0644 $(@D)/boot/fixup.dat $(BINARIES_DIR)/rpi-firmware/fixup_default.dat
+ $(INSTALL) -D -m 0644 $(@D)/boot/fixup_x.dat $(BINARIES_DIR)/rpi-firmware/fixup_x.dat
$(INSTALL) -D -m 0644 $(@D)/boot/fixup_cd.dat $(BINARIES_DIR)/rpi-firmware/fixup_cd.dat
endef
endif