Message ID | 4130fc6b4088a7e75f30e0ac226f5acb41cb530c.1338732273.git.thomas.petazzoni@free-electrons.com |
---|---|
State | Accepted |
Headers | show |
On Sun, Jun 3, 2012 at 4:04 PM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > toolchain/toolchain-external/Config.in | 68 ++++++++++++++++++++++++++++++ > toolchain/toolchain-external/ext-tool.mk | 3 ++ > 2 files changed, 71 insertions(+) > > diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in > index fcac7da..1452cad 100644 > --- a/toolchain/toolchain-external/Config.in > +++ b/toolchain/toolchain-external/Config.in > @@ -180,6 +180,73 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3 > Select BR2_SOFT_FLOAT > Set BR2_TARGET_OPTIMIZATION to -mthumb > > +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109 > + bool "Sourcery CodeBench MIPS 2011.09" > + depends on BR2_mips || BR2_mipsel > + select BR2_TOOLCHAIN_EXTERNAL_GLIBC > + select BR2_INSTALL_LIBSTDCPP > + help > + Sourcery CodeBench toolchain for the MIPS architecture, from > + Mentor Graphics. It uses gcc 4.5.2, binutils 2.21.53, glibc > + 2.13, uClibc 0.9.30 and gdb 7.2.50, kernel headers > + 3.0.1. It has support for the following variants: > + - MIPS32 O32 big endian glibc > + Select a MIPS generic core > + Disable BR2_SOFT_FLOAT > + - MIPS64 big endian glibc > + Select a MIPS generic core > + Select the n64 ABI > + Disable BR2_SOFT_FLOAT > + - MIPS32 O32 little endian glibc > + Select a MIPS generic core > + Disable BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -EL > + - MIPS64 little endian glibc > + Select a MIPS generic core > + Select the n64 ABI > + Disable BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -EL > + - MIPS32 big endian soft float glibc > + Select a MIPS generic core > + Select BR2_SOFT_FLOAT > + - MIPS64 big endian soft float glibc > + Select a MIPS generic core > + Select the n64 ABI > + Select BR2_SOFT_FLOAT > + - MIPS32 little endian soft float glibc > + Select a MIPS generic core > + Select BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -EL > + - MIPS64 little endian soft float glibc > + Select a MIPS generic core > + Select the n64 ABI > + Select BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -EL > + - MIPS32 big endian microMIPS glibc > + Select a MIPS generic core > + Disable BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -mips16 > + - MIPS32 little endian microMIPS glibc > + Select a MIPS generic core > + Disable BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -EL -mips16 > + - MIPS32 big endian soft float microMIPS glibc > + Select a MIPS generic core > + Select BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -mips16 > + - MIPS32 little endian soft float microMIPS glibc > + Select a MIPS generic core > + Select BR2_SOFT_FLOAT > + Set BR2_TARGET_OPTIMIZATION to -EL -mips16 > + - MIPS32 big endian uclibc > + Not usable in Buildroot yet. > + - MIPS32 little endian uclibc > + Not usable in Buildroot yet. > + - MIPS32 big endian soft float uclibc > + Not usable in Buildroot yet. > + - MIPS32 little endian soft float uclibc > + Not usable in Buildroot yet. > + The indentation isn't entirely as it should be here. In my toolchain-external series (sent today) I fixed the indentation in this file for the existing toolchains. Awaiting acceptance of that patch, it would already be good if new toolchains use the correct indentation (tab + two spaces as base) for their help text. > config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 > bool "Sourcery CodeBench MIPS 2011.03" > depends on BR2_mips || BR2_mipsel > @@ -604,6 +671,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX > default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 > default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44 > default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 > + default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109 > default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 > default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 > default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 > diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk > index 88e0619..867480a 100644 > --- a/toolchain/toolchain-external/ext-tool.mk > +++ b/toolchain/toolchain-external/ext-tool.mk > @@ -212,6 +212,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 > else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103),y) > TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package9469/public/mips-linux-gnu/ > TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-110-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 > +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109),y) > +TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/GNUToolchain/package9761/public/mips-linux-gnu/ > +TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.09-75-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 > else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y) > TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/power/portal/package7703/public/powerpc-linux-gnu/ > TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 > -- > 1.7.9.5 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index fcac7da..1452cad 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -180,6 +180,73 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3 Select BR2_SOFT_FLOAT Set BR2_TARGET_OPTIMIZATION to -mthumb +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109 + bool "Sourcery CodeBench MIPS 2011.09" + depends on BR2_mips || BR2_mipsel + select BR2_TOOLCHAIN_EXTERNAL_GLIBC + select BR2_INSTALL_LIBSTDCPP + help + Sourcery CodeBench toolchain for the MIPS architecture, from + Mentor Graphics. It uses gcc 4.5.2, binutils 2.21.53, glibc + 2.13, uClibc 0.9.30 and gdb 7.2.50, kernel headers + 3.0.1. It has support for the following variants: + - MIPS32 O32 big endian glibc + Select a MIPS generic core + Disable BR2_SOFT_FLOAT + - MIPS64 big endian glibc + Select a MIPS generic core + Select the n64 ABI + Disable BR2_SOFT_FLOAT + - MIPS32 O32 little endian glibc + Select a MIPS generic core + Disable BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -EL + - MIPS64 little endian glibc + Select a MIPS generic core + Select the n64 ABI + Disable BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -EL + - MIPS32 big endian soft float glibc + Select a MIPS generic core + Select BR2_SOFT_FLOAT + - MIPS64 big endian soft float glibc + Select a MIPS generic core + Select the n64 ABI + Select BR2_SOFT_FLOAT + - MIPS32 little endian soft float glibc + Select a MIPS generic core + Select BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -EL + - MIPS64 little endian soft float glibc + Select a MIPS generic core + Select the n64 ABI + Select BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -EL + - MIPS32 big endian microMIPS glibc + Select a MIPS generic core + Disable BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -mips16 + - MIPS32 little endian microMIPS glibc + Select a MIPS generic core + Disable BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -EL -mips16 + - MIPS32 big endian soft float microMIPS glibc + Select a MIPS generic core + Select BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -mips16 + - MIPS32 little endian soft float microMIPS glibc + Select a MIPS generic core + Select BR2_SOFT_FLOAT + Set BR2_TARGET_OPTIMIZATION to -EL -mips16 + - MIPS32 big endian uclibc + Not usable in Buildroot yet. + - MIPS32 little endian uclibc + Not usable in Buildroot yet. + - MIPS32 big endian soft float uclibc + Not usable in Buildroot yet. + - MIPS32 little endian soft float uclibc + Not usable in Buildroot yet. + config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 bool "Sourcery CodeBench MIPS 2011.03" depends on BR2_mips || BR2_mipsel @@ -604,6 +671,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44 default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 + default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index 88e0619..867480a 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -212,6 +212,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package9469/public/mips-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-110-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201109),y) +TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/GNUToolchain/package9761/public/mips-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.09-75-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/power/portal/package7703/public/powerpc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- toolchain/toolchain-external/Config.in | 68 ++++++++++++++++++++++++++++++ toolchain/toolchain-external/ext-tool.mk | 3 ++ 2 files changed, 71 insertions(+)