@@ -577,6 +577,7 @@ source "package/rsyslog/Config.in"
source "package/sysklogd/Config.in"
source "package/sysvinit/Config.in"
endif
+source "package/systemd/Config.in"
source "package/util-linux/Config.in"
source "package/dsp-tools/Config.in"
endmenu
@@ -39,6 +39,10 @@ else
DBUS_CONF_OPT += --without-x
endif
+ifeq ($(BR2_PACKAGE_SYSTEMD),y)
+DBUS_CONF_OPT += --with-systemdsystemunitdir=/lib/systemd/system
+endif
+
# fix rebuild (dbus makefile errors out if /var/lib/dbus is a symlink)
define DBUS_REMOVE_VAR_LIB_DBUS
rm -rf $(TARGET_DIR)/var/lib/dbus
new file mode 100644
@@ -0,0 +1,20 @@
+config BR2_PACKAGE_SYSTEMD
+ bool "systemd"
+ depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+ depends on BR2_INET_IPV6
+ select BR2_PACKAGE_DBUS
+ select BR2_PACKAGE_LIBCAP
+ help
+ systemd is a system and service manager for Linux, compatible with
+ SysV and LSB init scripts. systemd provides aggressive parallelization
+ capabilities, uses socket and D-Bus activation for starting services,
+ offers on-demand starting of daemons, keeps track of processes using
+ Linux cgroups, supports snapshotting and restoring of the system
+ state, maintains mount and automount points and implements an
+ elaborate transactional dependency-based service control logic.
+ It can work as a drop-in replacement for sysvinit.
+
+ http://freedesktop.org/wiki/Software/systemd
+
+comment "systemd not available (depends on /dev management with udev and ipv6 support)"
+ depends on !(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV && BR2_INET_IPV6)
new file mode 100644
@@ -0,0 +1,34 @@
+Prefer getty to agetty in console setup systemd units
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ units/getty@.service.m4 | 2 +-
+ units/serial-getty@.service.m4 | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+Index: systemd-37/units/getty@.service.m4
+===================================================================
+--- systemd-37.orig/units/getty@.service.m4
++++ systemd-37/units/getty@.service.m4
+@@ -32,7 +32,7 @@
+
+ [Service]
+ Environment=TERM=linux
+-ExecStart=-/sbin/agetty %I 38400
++ExecStart=-/sbin/getty -L %I 115200 vt100
+ Restart=always
+ RestartSec=0
+ UtmpIdentifier=%I
+Index: systemd-37/units/serial-getty@.service.m4
+===================================================================
+--- systemd-37.orig/units/serial-getty@.service.m4
++++ systemd-37/units/serial-getty@.service.m4
+@@ -32,7 +32,7 @@
+
+ [Service]
+ Environment=TERM=vt100
+-ExecStart=-/sbin/agetty -s %I 115200,38400,9600
++ExecStart=-/sbin/getty -L %I 115200 vt100
+ Restart=always
+ RestartSec=0
+ UtmpIdentifier=%I
new file mode 100644
@@ -0,0 +1,62 @@
+#############################################################
+#
+# systemd
+#
+#############################################################
+SYSTEMD_VERSION = 37
+SYSTEMD_SITE = http://www.freedesktop.org/software/systemd/
+SYSTEMD_SOURCE = systemd-$(SYSTEMD_VERSION).tar.bz2
+SYSTEMD_DEPENDENCIES = \
+ host-intltool \
+ libcap \
+ udev \
+ dbus
+
+# Make sure that systemd will always be built after busybox so that we have
+# a consitent init setup between two builds
+ifeq ($(BR2_PACKAGE_BUSYBOX),y)
+ SYSTEMD_DEPENDENCIES += busybox
+endif
+
+SYSTEMD_CONF_OPT += \
+ --with-distro=other \
+ --disable-selinux \
+ --disable-pam \
+ --disable-libcryptsetup \
+ --disable-gtk \
+ --disable-plymouth \
+ --with-rootdir=/ \
+ --with-dbuspolicydir=/etc/dbus-1/system.d \
+ --with-dbussessionservicedir=/usr/share/dbus-1/services \
+ --with-dbussystemservicedir=/usr/share/dbus-1/system-services \
+ --with-dbusinterfacedir=/usr/share/dbus-1/interfaces \
+ --with-udevrulesdir=/etc/udev/rules.d \
+ --with-sysvinit-path=/etc/init.d/ \
+ --without-sysvrcd-path
+
+ifeq ($(BR2_PACKAGE_ACL),y)
+ SYSTEMD_CONF_OPT += --enable-acl
+ SYSTEMD_DEPENDENCIES += acl
+else
+ SYSTEMD_CONF_OPT += --disable-acl
+endif
+
+define SYSTEMD_INSTALL_INIT_HOOK
+ ln -fs ../bin/systemd $(TARGET_DIR)/sbin/init
+ ln -fs ../bin/systemctl $(TARGET_DIR)/sbin/halt
+ ln -fs ../bin/systemctl $(TARGET_DIR)/sbin/poweroff
+ ln -fs ../bin/systemctl $(TARGET_DIR)/sbin/reboot
+
+ ln -fs ../../../../lib/systemd/system/multi-user.target $(TARGET_DIR)/etc/systemd/system/default.target
+endef
+
+define SYSTEMD_INSTALL_TTY_HOOK
+ rm -f $(TARGET_DIR)/etc/systemd/system/getty.target.wants/getty@tty1.service
+ ln -fs ../../../../lib/systemd/system/serial-getty@.service $(TARGET_DIR)/etc/systemd/system/getty.target.wants/serial-getty@$(BR2_TARGET_GENERIC_GETTY_PORT).service
+endef
+
+SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+ SYSTEMD_INSTALL_INIT_HOOK \
+ SYSTEMD_INSTALL_TTY_HOOK \
+
+$(eval $(call AUTOTARGETS))
@@ -35,6 +35,10 @@ UDEV_CONF_OPT += \
--disable-gudev
endif
+ifeq ($(BR2_PACKAGE_SYSTEMD),y)
+ UDEV_CONF_OPT += --with-systemdsystemunitdir=/lib/systemd/system/
+endif
+
define UDEV_INSTALL_INITSCRIPT
$(INSTALL) -m 0755 package/udev/S10udev $(TARGET_DIR)/etc/init.d/S10udev
endef
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- package/Config.in | 1 + package/dbus/dbus.mk | 4 ++ package/systemd/Config.in | 20 +++++++ package/systemd/systemd-37-fix-getty-unit.patch | 34 ++++++++++++ package/systemd/systemd.mk | 62 +++++++++++++++++++++++ package/udev/udev.mk | 4 ++ 6 files changed, 125 insertions(+), 0 deletions(-) create mode 100644 package/systemd/Config.in create mode 100644 package/systemd/systemd-37-fix-getty-unit.patch create mode 100644 package/systemd/systemd.mk