[v5] board/arcturus/aarch64-ucls1012a: bump u-boot and kernel version

- Bump Linux to version 5.4.137
- Bump U-Boot to add new targets, version remains the same
- Drop BR2_ROOTFS_OVERLAY and remove S09modload script because it was 
  only used by PFE and now PFE is loaded directly by the kernel
- Use Image.gz instead of Image to have a compressed kernel
- Rename ucls1012a.its to br2-ucls1012a.its since post-build.sh and 
  post-image.sh use different name. This fixes the bug that didn't 
  allow the creation of the part0-000000.itb file.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
V1->V2:
- Bump the kernel to "Linux version 5.4.137"
- Bootloader version is still "U-Boot 2019.10" but new targets added.
- Remove the /etc/init.d/S09modload script to load the pfe firmware
  module because now the pfe firmware module is loaded by the kernel
- New compressed Image.gz is used 
V2->V3:
- Moved SoB to top of patch
- The use of Image.gz replace Image to force use of compression.
- Our scripts use br2-ucls1012a.its in error ucls1012a.its was used
  in original readme.
- Removing extra newline
- The NXP Packet Forward Engine (PFE) firmware loader was the only 
  file used in the overlay.  As the PFE is now loaded directly by 
  the kernel the BR2_ROOTFS_OVERLAY script has been removed.
V3->V4:
- Improved commit log by listing all the changed as suggested by Giulio.
- Updated header version comment in defconfig to reflect 5.4 series.
V4->V5:
- Adding Reviewed-by & Tested-by by Giulio.
- Wrapping commit log.
---
 board/arcturus/aarch64-ucls1012a/post-build.sh     |  1 -
 board/arcturus/aarch64-ucls1012a/readme.txt        |  4 ++--
 .../rootfs_overlay/etc/init.d/S09modload           | 14 --------------
 configs/arcturus_ucls1012a_defconfig               | 10 +++++-----
 4 files changed, 7 insertions(+), 22 deletions(-)
 delete mode 100755 board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload

On 22/02/2022 16:37, Michael Durrant wrote:
> - Bump Linux to version 5.4.137
> - Bump U-Boot to add new targets, version remains the same
> - Drop BR2_ROOTFS_OVERLAY and remove S09modload script because it was
>    only used by PFE and now PFE is loaded directly by the kernel
> - Use Image.gz instead of Image to have a compressed kernel
> - Rename ucls1012a.its to br2-ucls1012a.its since post-build.sh and
>    post-image.sh use different name. This fixes the bug that didn't
>    allow the creation of the part0-000000.itb file.
> 
> Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

  Applied to master, thanks.

  Regards,
  Arnout

> ---
> V1->V2:
> - Bump the kernel to "Linux version 5.4.137"
> - Bootloader version is still "U-Boot 2019.10" but new targets added.
> - Remove the /etc/init.d/S09modload script to load the pfe firmware
>    module because now the pfe firmware module is loaded by the kernel
> - New compressed Image.gz is used
> V2->V3:
> - Moved SoB to top of patch
> - The use of Image.gz replace Image to force use of compression.
> - Our scripts use br2-ucls1012a.its in error ucls1012a.its was used
>    in original readme.
> - Removing extra newline
> - The NXP Packet Forward Engine (PFE) firmware loader was the only
>    file used in the overlay.  As the PFE is now loaded directly by
>    the kernel the BR2_ROOTFS_OVERLAY script has been removed.
> V3->V4:
> - Improved commit log by listing all the changed as suggested by Giulio.
> - Updated header version comment in defconfig to reflect 5.4 series.
> V4->V5:
> - Adding Reviewed-by & Tested-by by Giulio.
> - Wrapping commit log.
> ---
>   board/arcturus/aarch64-ucls1012a/post-build.sh     |  1 -
>   board/arcturus/aarch64-ucls1012a/readme.txt        |  4 ++--
>   .../rootfs_overlay/etc/init.d/S09modload           | 14 --------------
>   configs/arcturus_ucls1012a_defconfig               | 10 +++++-----
>   4 files changed, 7 insertions(+), 22 deletions(-)
>   delete mode 100755 board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload
> 
> diff --git a/board/arcturus/aarch64-ucls1012a/post-build.sh b/board/arcturus/aarch64-ucls1012a/post-build.sh
> index f8ba78095f..372df59c61 100755
> --- a/board/arcturus/aarch64-ucls1012a/post-build.sh
> +++ b/board/arcturus/aarch64-ucls1012a/post-build.sh
> @@ -1,5 +1,4 @@
>   #!/bin/sh
>   
>   mkdir -p ${TARGET_DIR}/lib/firmware
> -cp -f ${BUILD_DIR}/linux-custom/firmware/ppfe/* ${TARGET_DIR}/lib/firmware/
>   cp -f ${BUILD_DIR}/linux-custom/br2-ucls1012a.its ${BINARIES_DIR}/
> diff --git a/board/arcturus/aarch64-ucls1012a/readme.txt b/board/arcturus/aarch64-ucls1012a/readme.txt
> index 483d5e9aef..b486ecebc7 100644
> --- a/board/arcturus/aarch64-ucls1012a/readme.txt
> +++ b/board/arcturus/aarch64-ucls1012a/readme.txt
> @@ -24,13 +24,13 @@ After building, you should obtain this tree:
>   
>       output/images/
>       +-- arc-ucls1012a.dtb
> -    +-- Image
> +    +-- Image.gz
>       +-- part0-000000.itb
>       +-- rootfs.cpio
>       +-- rootfs.cpio.gz
>       +-- rootfs.tar
>       +-- u-boot.bin
> -    +-- ucls1012a.its
> +    +-- br2-ucls1012a.its
>   
>   Flashing
>   --------
> diff --git a/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload b/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload
> deleted file mode 100755
> index c87ffda14f..0000000000
> --- a/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -#!/bin/sh
> -#
> -case "$1" in
> -       start)
> -                modprobe pfe
> -                ;;
> -        stop)
> -                ;;
> -        restart|reload)
> -                ;;
> -        *)
> -                echo "Usage: $0 {start|stop|restart}"
> -                exit 1
> -esac
> diff --git a/configs/arcturus_ucls1012a_defconfig b/configs/arcturus_ucls1012a_defconfig
> index fd33ebf1f6..124cc3ff94 100644
> --- a/configs/arcturus_ucls1012a_defconfig
> +++ b/configs/arcturus_ucls1012a_defconfig
> @@ -1,22 +1,22 @@
>   # Architecture
>   BR2_aarch64=y
>   
> -# Linux headers same as kernel, a 4.14 series
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
> +# Linux headers same as kernel, a 5.4 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
>   
>   # System settings
>   BR2_TARGET_GENERIC_HOSTNAME="ucls1012a"
>   BR2_TARGET_GENERIC_ISSUE="Welcome to uCLS1012A-SOM"
>   BR2_SYSTEM_DHCP="eth0"
> -BR2_ROOTFS_OVERLAY="board/arcturus/aarch64-ucls1012a/rootfs_overlay"
>   BR2_ROOTFS_POST_BUILD_SCRIPT="board/arcturus/aarch64-ucls1012a/post-build.sh"
>   BR2_ROOTFS_POST_IMAGE_SCRIPT="board/arcturus/aarch64-ucls1012a/post-image.sh"
>   
>   # Kernel
>   BR2_LINUX_KERNEL=y
>   BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCLS1012A-kernel,v.20.31)/linux-v.20.31.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCLS1012A-kernel,v.22.06)/linux-v.22.06.tar.gz"
>   BR2_LINUX_KERNEL_DEFCONFIG="ucls1012a"
> +BR2_LINUX_KERNEL_IMAGEGZ=y
>   BR2_LINUX_KERNEL_DTS_SUPPORT=y
>   BR2_LINUX_KERNEL_INTREE_DTS_NAME="arcturus/arc-ucls1012a"
>   
> @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_CPIO_GZIP=y
>   BR2_TARGET_UBOOT=y
>   BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
>   BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
> -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCLS1012A-uboot,v.20.31)/uboot-v.20.31.tar.gz"
> +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCLS1012A-uboot,v.22.06)/uboot-v.22.06.tar.gz"
>   BR2_TARGET_UBOOT_BOARD_DEFCONFIG="UCLS1012A_QSPI128"
>   
>   # Tools