Message ID | 20220114024555.319448-1-festevam@gmail.com |
---|---|
State | Changes Requested |
Headers | show |
Series | [v2] configs/imx8mmevk: new defconfig | expand |
Hi Fabio, Am Fr., 14. Jan. 2022 um 03:46 Uhr schrieb Fabio Estevam <festevam@gmail.com>: > > Add support for imx8mmevk_defconfig that allows booting kernel, U-Boot and > TFA from the upstream repositories. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > --- > Changes since v1: > - Also use TF-A and U-Boot upstream versions. > > DEVELOPERS | 1 + > board/freescale/imx8mmevk/genimage.cfg | 16 ++++++++ > board/freescale/imx8mmevk/readme.txt | 6 +++ > .../boot/extlinux/extlinux.conf | 4 ++ > configs/imx8mmevk_defconfig | 39 +++++++++++++++++++ > 5 files changed, 66 insertions(+) > create mode 100644 board/freescale/imx8mmevk/genimage.cfg > create mode 100644 board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf > create mode 100644 configs/imx8mmevk_defconfig > > diff --git a/DEVELOPERS b/DEVELOPERS > index 12777e8d61..e19072a14e 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -839,6 +839,7 @@ F: configs/imx6ullevk_defconfig > F: configs/imx6ulpico_defconfig > F: configs/imx7d-sdb_defconfig > F: configs/imx7dpico_defconfig > +F: configs/imx8mmevk_defconfig > F: configs/imx8mqevk_defconfig > F: configs/mx25pdk_defconfig > F: configs/mx51evk_defconfig > diff --git a/board/freescale/imx8mmevk/genimage.cfg b/board/freescale/imx8mmevk/genimage.cfg > new file mode 100644 > index 0000000000..3a83aa1f03 > --- /dev/null > +++ b/board/freescale/imx8mmevk/genimage.cfg > @@ -0,0 +1,16 @@ > +image sdcard.img { > + hdimage { > + } > + > + partition imx-boot { > + in-partition-table = "no" > + image = "flash.bin" > + offset = 33k Giulio pointed out to me that the units should be described with capital letters. > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + offset = 8M > + } > +} > diff --git a/board/freescale/imx8mmevk/readme.txt b/board/freescale/imx8mmevk/readme.txt > index 7b69405d30..a8e80a48f9 100644 > --- a/board/freescale/imx8mmevk/readme.txt > +++ b/board/freescale/imx8mmevk/readme.txt > @@ -10,8 +10,14 @@ Build > > First, configure Buildroot for the i.MX8MM EVK board: > > +If you want to use the NXP kernel: > + > make freescale_imx8mmevk_defconfig > > +Or if you want to use a mainline kernel: > + > + make imx8mmevk_defconfig > + > Build all components: > > make > diff --git a/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf > new file mode 100644 > index 0000000000..0ba2e4cbfc > --- /dev/null > +++ b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf > @@ -0,0 +1,4 @@ > +Label imx8mm-evk-buildroot > + kernel /boot/Image > + devicetree /boot/imx8mm-evk.dtb > + append root=/dev/mmcblk1p1 rootwait rw I my respin I used: append root=PARTUUID=%PARTUUID% rootwait rw The UUID is created in a post-build.sh script and set it in extlinux.conf and genimage.cfg With that the image would not limited to be located on the SD card. > diff --git a/configs/imx8mmevk_defconfig b/configs/imx8mmevk_defconfig > new file mode 100644 > index 0000000000..170b8d273b > --- /dev/null > +++ b/configs/imx8mmevk_defconfig > @@ -0,0 +1,39 @@ > +BR2_aarch64=y > +BR2_ARM_FPU_VFPV3=y > +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" > +BR2_ROOTFS_OVERLAY="board/freescale/imx8mmevk/rootfs_overlay" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imx8mmevk/genimage.cfg" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.14" > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-evk" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > +BR2_PACKAGE_FREESCALE_IMX=y > +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y > +BR2_PACKAGE_FIRMWARE_IMX=y > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="240M" Do you need 240MB here? > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30890000" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm_evk" > +BR2_TARGET_UBOOT_NEEDS_DTC=y > +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y > +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" > +BR2_TARGET_UBOOT_SPL=y > +BR2_PACKAGE_HOST_GENIMAGE=y > -- > 2.25.1 >
Hi Heiko, On Sat, Jan 15, 2022 at 3:56 AM Heiko Thiery <heiko.thiery@gmail.com> wrote: > > + partition imx-boot { > > + in-partition-table = "no" > > + image = "flash.bin" > > + offset = 33k > > Giulio pointed out to me that the units should be described with > capital letters. Thanks for pointing this out. I will change it. In the long term, we could probably use a common genimage.cfg too. > I my respin I used: > > append root=PARTUUID=%PARTUUID% rootwait rw > > The UUID is created in a post-build.sh script and set it in > extlinux.conf and genimage.cfg > > With that the image would not limited to be located on the SD card. Good idea. Will change it. > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" On my tests, I noticed that if I build U-Boot 2022.01 + TF-A mainline, then the kernel 5.16 does not boot. Using TF-A from the NXP BSP allows me to boot 5.16 without issues. I will try to investigate why this happens with imx8mm-evk, as your board does not show issues. Thanks
Hello Fabio, On Thu, 13 Jan 2022 23:45:55 -0300 Fabio Estevam <festevam@gmail.com> wrote: > Add support for imx8mmevk_defconfig that allows booting kernel, U-Boot and > TFA from the upstream repositories. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > --- > Changes since v1: > - Also use TF-A and U-Boot upstream versions. You had some comments from Heiko on this patch, and you said you would come back with a newer version, but unless I missed it, I couldn't find a v3. I'll now mark this v2 as Changes Requested in patchwork, so if you don't submit a v3, we will most likely forget about this topic. But it would be good to have a defconfig for the i.MX8MM EVK. Thanks a lot! Thomas
diff --git a/DEVELOPERS b/DEVELOPERS index 12777e8d61..e19072a14e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -839,6 +839,7 @@ F: configs/imx6ullevk_defconfig F: configs/imx6ulpico_defconfig F: configs/imx7d-sdb_defconfig F: configs/imx7dpico_defconfig +F: configs/imx8mmevk_defconfig F: configs/imx8mqevk_defconfig F: configs/mx25pdk_defconfig F: configs/mx51evk_defconfig diff --git a/board/freescale/imx8mmevk/genimage.cfg b/board/freescale/imx8mmevk/genimage.cfg new file mode 100644 index 0000000000..3a83aa1f03 --- /dev/null +++ b/board/freescale/imx8mmevk/genimage.cfg @@ -0,0 +1,16 @@ +image sdcard.img { + hdimage { + } + + partition imx-boot { + in-partition-table = "no" + image = "flash.bin" + offset = 33k + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + offset = 8M + } +} diff --git a/board/freescale/imx8mmevk/readme.txt b/board/freescale/imx8mmevk/readme.txt index 7b69405d30..a8e80a48f9 100644 --- a/board/freescale/imx8mmevk/readme.txt +++ b/board/freescale/imx8mmevk/readme.txt @@ -10,8 +10,14 @@ Build First, configure Buildroot for the i.MX8MM EVK board: +If you want to use the NXP kernel: + make freescale_imx8mmevk_defconfig +Or if you want to use a mainline kernel: + + make imx8mmevk_defconfig + Build all components: make diff --git a/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..0ba2e4cbfc --- /dev/null +++ b/board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +Label imx8mm-evk-buildroot + kernel /boot/Image + devicetree /boot/imx8mm-evk.dtb + append root=/dev/mmcblk1p1 rootwait rw diff --git a/configs/imx8mmevk_defconfig b/configs/imx8mmevk_defconfig new file mode 100644 index 0000000000..170b8d273b --- /dev/null +++ b/configs/imx8mmevk_defconfig @@ -0,0 +1,39 @@ +BR2_aarch64=y +BR2_ARM_FPU_VFPV3=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" +BR2_ROOTFS_OVERLAY="board/freescale/imx8mmevk/rootfs_overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imx8mmevk/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.14" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mm-evk" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="240M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.6" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30890000" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm_evk" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_GENIMAGE=y
Add support for imx8mmevk_defconfig that allows booting kernel, U-Boot and TFA from the upstream repositories. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Changes since v1: - Also use TF-A and U-Boot upstream versions. DEVELOPERS | 1 + board/freescale/imx8mmevk/genimage.cfg | 16 ++++++++ board/freescale/imx8mmevk/readme.txt | 6 +++ .../boot/extlinux/extlinux.conf | 4 ++ configs/imx8mmevk_defconfig | 39 +++++++++++++++++++ 5 files changed, 66 insertions(+) create mode 100644 board/freescale/imx8mmevk/genimage.cfg create mode 100644 board/freescale/imx8mmevk/rootfs_overlay/boot/extlinux/extlinux.conf create mode 100644 configs/imx8mmevk_defconfig