diff mbox series

[v2,03/28] support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinner

Message ID 20210609200003.2866122-4-geomatsi@gmail.com
State Rejected
Headers show
Series sunxi: use mainline arm-trusted-firmware | expand

Commit Message

Sergey Matyukevich June 9, 2021, 7:59 p.m. UTC 
Bump U-Boot version in TestATFAllwinner. Updating U-Boot version to
2021.04 requires the following two changes.

First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.

Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
---
 support/testing/tests/boot/test_atf.py | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/support/testing/tests/boot/test_atf.py b/support/testing/tests/boot/test_atf.py
index 868b13c9e6..8f7c8e5650 100644
--- a/support/testing/tests/boot/test_atf.py
+++ b/support/testing/tests/boot/test_atf.py
@@ -42,16 +42,15 @@  class TestATFAllwinner(infra.basetest.BRTest):
         BR2_TARGET_UBOOT=y
         BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
         BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-        BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
+        BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04"
         BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m64"
         BR2_TARGET_UBOOT_NEEDS_DTC=y
         BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
         BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
         BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-        BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-        BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
         BR2_TARGET_UBOOT_SPL=y
-        BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+        BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+        BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null"
         """
 
     def test_run(self):