diff mbox series

[v1] package/siproxd: new package

Message ID 20210310073844.26494-1-post@lespocky.de
State Accepted
Headers show
Series [v1] package/siproxd: new package | expand

Commit Message

Alexander Dahl March 10, 2021, 7:38 a.m. UTC 
Siproxd is a masquerading SIP Proxy Server.  We had a buildroot package
for that in the fli4l Linux router distribution for years with different
authors contributing.

Co-authored-by: Christoph Schulz <fli4l@kristov.de>
Co-authored-by: Claas Hilbrecht <babel@fli4l.de>
Signed-off-by: Alexander Dahl <post@lespocky.de>
---

Notes:
    Actually what we had in fli4l was a package for 0.8.2.  I revised it and
    covered all things check-packaged complained about.  Tested on x86_64
    with uclibc toolchain.  Builds fine on all fli4l targets (x86, x86_64,
    rpi, sunxi).  This is basically just upstreaming effort.  I marked it as
    v1, because I expect some remarks and little things to be changed.

 DEVELOPERS                   |  1 +
 package/Config.in            |  1 +
 package/siproxd/Config.in    | 16 ++++++++++++++++
 package/siproxd/siproxd.hash | 11 +++++++++++
 package/siproxd/siproxd.mk   | 24 ++++++++++++++++++++++++
 5 files changed, 53 insertions(+)
 create mode 100644 package/siproxd/Config.in
 create mode 100644 package/siproxd/siproxd.hash
 create mode 100644 package/siproxd/siproxd.mk


base-commit: da6cca38da1584fed17ffb40316cd7c2fdd5e754

Comments

Yann E. MORIN March 14, 2021, 5:23 p.m. UTC | #1 
Alexander, All,

On 2021-03-10 08:38 +0100, Alexander Dahl spake thusly:
> Siproxd is a masquerading SIP Proxy Server.  We had a buildroot package
> for that in the fli4l Linux router distribution for years with different
> authors contributing.
> 
> Co-authored-by: Christoph Schulz <fli4l@kristov.de>
> Co-authored-by: Claas Hilbrecht <babel@fli4l.de>
> Signed-off-by: Alexander Dahl <post@lespocky.de>
> ---
> 
> Notes:
>     Actually what we had in fli4l was a package for 0.8.2.  I revised it and
>     covered all things check-packaged complained about.  Tested on x86_64
>     with uclibc toolchain.  Builds fine on all fli4l targets (x86, x86_64,
>     rpi, sunxi).  This is basically just upstreaming effort.  I marked it as
>     v1, because I expect some remarks and little things to be changed.

I've made use of an external libtool unconditional, and applied to
master, thanks.

Regards,
Yann E. MORIN.

>  DEVELOPERS                   |  1 +
>  package/Config.in            |  1 +
>  package/siproxd/Config.in    | 16 ++++++++++++++++
>  package/siproxd/siproxd.hash | 11 +++++++++++
>  package/siproxd/siproxd.mk   | 24 ++++++++++++++++++++++++
>  5 files changed, 53 insertions(+)
>  create mode 100644 package/siproxd/Config.in
>  create mode 100644 package/siproxd/siproxd.hash
>  create mode 100644 package/siproxd/siproxd.mk
> 
> diff --git a/DEVELOPERS b/DEVELOPERS
> index f6d6e4aa06..a7a0c30bd6 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -70,6 +70,7 @@ F:	package/odhcp6c/
>  N:	Alexander Dahl <post@lespocky.de>
>  F:	package/fastd/
>  F:	package/libuecc/
> +F:	package/siproxd/
>  F:	package/putty/
>  
>  N:	Alexander Egorenkov <egorenar-dev@posteo.net>
> diff --git a/package/Config.in b/package/Config.in
> index 992e46a319..d919e71cb3 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -1828,6 +1828,7 @@ menu "Networking"
>  	source "package/resiprocate/Config.in"
>  	source "package/restclient-cpp/Config.in"
>  	source "package/rtmpdump/Config.in"
> +	source "package/siproxd/Config.in"
>  	source "package/slirp/Config.in"
>  	source "package/snmppp/Config.in"
>  	source "package/sofia-sip/Config.in"
> diff --git a/package/siproxd/Config.in b/package/siproxd/Config.in
> new file mode 100644
> index 0000000000..6939033025
> --- /dev/null
> +++ b/package/siproxd/Config.in
> @@ -0,0 +1,16 @@
> +config BR2_PACKAGE_SIPROXD
> +	bool "siproxd"
> +	select BR2_PACKAGE_LIBOSIP2
> +	select BR2_PACKAGE_SQLITE
> +	help
> +	  Siproxd is a proxy/masquerading daemon for SIP (Session
> +	  Initiation Protocol), which is used in IP telephony. It
> +	  handles registrations of SIP clients on a private IP network
> +	  and performs rewriting of the SIP message bodies to make SIP
> +	  connections work via a masquerading firewall (NAT). It allows
> +	  SIP software clients (like kphone, linphone) or SIP hardware
> +	  clients (Voice over IP phones which are SIP-compatible, such
> +	  as those from Cisco, Grandstream or Snom) to work behind an IP
> +	  masquerading firewall or NAT router.
> +
> +	  http://siproxd.sourceforge.net/
> diff --git a/package/siproxd/siproxd.hash b/package/siproxd/siproxd.hash
> new file mode 100644
> index 0000000000..be6815725a
> --- /dev/null
> +++ b/package/siproxd/siproxd.hash
> @@ -0,0 +1,11 @@
> +# Locally calculated after checking pgp signature from:
> +# https://downloads.sourceforge.net/project/siproxd/siproxd/0.8.3/siproxd-0.8.3.tar.gz.asc
> +sha256  9a6d7a6bb6fff162775b1e1fb7018de9c69642cbf8626185dc6ffceeeba07736  siproxd-0.8.3.tar.gz
> +
> +# https://sourceforge.net/projects/siproxd/files/siproxd/0.8.3/
> +sha1  d13d4a05b8a16dbe20d04b99b535610e49050d9d  siproxd-0.8.3.tar.gz
> +md5  9a9d2c89e5f0c59fdde9444a66d8372c  siproxd-0.8.3.tar.gz
> +
> +# Hash for license files:
> +sha256  231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c  COPYING
> +sha256  f18a0811fa0e220ccbc42f661545e77f0388631e209585ed582a1c693029c6aa  libltdl/COPYING.LIB
> diff --git a/package/siproxd/siproxd.mk b/package/siproxd/siproxd.mk
> new file mode 100644
> index 0000000000..624b948699
> --- /dev/null
> +++ b/package/siproxd/siproxd.mk
> @@ -0,0 +1,24 @@
> +################################################################################
> +#
> +# siproxd
> +#
> +################################################################################
> +
> +SIPROXD_VERSION = 0.8.3
> +SIPROXD_SITE = https://downloads.sourceforge.net/project/siproxd/siproxd/$(SIPROXD_VERSION)
> +
> +SIPROXD_LICENSE = GPL-2.0+
> +SIPROXD_LICENSE_FILES = COPYING
> +
> +SIPROXD_DEPENDENCIES = libosip2 sqlite
> +
> +ifeq ($(BR2_PACKAGE_LIBTOOL),y)
> +SIPROXD_CONF_OPTS += --without-included-ltdl
> +SIPROXD_DEPENDENCIES += libtool
> +else
> +SIPROXD_CONF_OPTS += --with-included-ltdl
> +SIPROXD_LICENSE += , LGPL-2.1+
> +SIPROXD_LICENSE_FILES += libltdl/COPYING.LIB
> +endif
> +
> +$(eval $(autotools-package))
> 
> base-commit: da6cca38da1584fed17ffb40316cd7c2fdd5e754
> -- 
> 2.20.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
Alexander Dahl March 15, 2021, 5:55 a.m. UTC | #2 
Hei hei,

On Sun, Mar 14, 2021 at 06:23:24PM +0100, Yann E. MORIN wrote:
> On 2021-03-10 08:38 +0100, Alexander Dahl spake thusly:
> > Siproxd is a masquerading SIP Proxy Server.  We had a buildroot package
> > for that in the fli4l Linux router distribution for years with different
> > authors contributing.
> > 
> > Co-authored-by: Christoph Schulz <fli4l@kristov.de>
> > Co-authored-by: Claas Hilbrecht <babel@fli4l.de>
> > Signed-off-by: Alexander Dahl <post@lespocky.de>
> > ---
> > 
> > Notes:
> >     Actually what we had in fli4l was a package for 0.8.2.  I revised it and
> >     covered all things check-packaged complained about.  Tested on x86_64
> >     with uclibc toolchain.  Builds fine on all fli4l targets (x86, x86_64,
> >     rpi, sunxi).  This is basically just upstreaming effort.  I marked it as
> >     v1, because I expect some remarks and little things to be changed.
> 
> I've made use of an external libtool unconditional, and applied to
> master, thanks.

Thanks Yann. A question though: siproxd uses ltdl for loading .so
files (its own plugins) at runtime. Would that be possible with
static-only builds at all? Asking because I stumbled over bff7b75552ad
("package/nut: disable libltdl (and nut-scanner) for static-only") and
because I'm currently investigating how squid uses libltdl.

Greets
Alex

> 
> Regards,
> Yann E. MORIN.
> 
> >  DEVELOPERS                   |  1 +
> >  package/Config.in            |  1 +
> >  package/siproxd/Config.in    | 16 ++++++++++++++++
> >  package/siproxd/siproxd.hash | 11 +++++++++++
> >  package/siproxd/siproxd.mk   | 24 ++++++++++++++++++++++++
> >  5 files changed, 53 insertions(+)
> >  create mode 100644 package/siproxd/Config.in
> >  create mode 100644 package/siproxd/siproxd.hash
> >  create mode 100644 package/siproxd/siproxd.mk
> > 
> > diff --git a/DEVELOPERS b/DEVELOPERS
> > index f6d6e4aa06..a7a0c30bd6 100644
> > --- a/DEVELOPERS
> > +++ b/DEVELOPERS
> > @@ -70,6 +70,7 @@ F:	package/odhcp6c/
> >  N:	Alexander Dahl <post@lespocky.de>
> >  F:	package/fastd/
> >  F:	package/libuecc/
> > +F:	package/siproxd/
> >  F:	package/putty/
> >  
> >  N:	Alexander Egorenkov <egorenar-dev@posteo.net>
> > diff --git a/package/Config.in b/package/Config.in
> > index 992e46a319..d919e71cb3 100644
> > --- a/package/Config.in
> > +++ b/package/Config.in
> > @@ -1828,6 +1828,7 @@ menu "Networking"
> >  	source "package/resiprocate/Config.in"
> >  	source "package/restclient-cpp/Config.in"
> >  	source "package/rtmpdump/Config.in"
> > +	source "package/siproxd/Config.in"
> >  	source "package/slirp/Config.in"
> >  	source "package/snmppp/Config.in"
> >  	source "package/sofia-sip/Config.in"
> > diff --git a/package/siproxd/Config.in b/package/siproxd/Config.in
> > new file mode 100644
> > index 0000000000..6939033025
> > --- /dev/null
> > +++ b/package/siproxd/Config.in
> > @@ -0,0 +1,16 @@
> > +config BR2_PACKAGE_SIPROXD
> > +	bool "siproxd"
> > +	select BR2_PACKAGE_LIBOSIP2
> > +	select BR2_PACKAGE_SQLITE
> > +	help
> > +	  Siproxd is a proxy/masquerading daemon for SIP (Session
> > +	  Initiation Protocol), which is used in IP telephony. It
> > +	  handles registrations of SIP clients on a private IP network
> > +	  and performs rewriting of the SIP message bodies to make SIP
> > +	  connections work via a masquerading firewall (NAT). It allows
> > +	  SIP software clients (like kphone, linphone) or SIP hardware
> > +	  clients (Voice over IP phones which are SIP-compatible, such
> > +	  as those from Cisco, Grandstream or Snom) to work behind an IP
> > +	  masquerading firewall or NAT router.
> > +
> > +	  http://siproxd.sourceforge.net/
> > diff --git a/package/siproxd/siproxd.hash b/package/siproxd/siproxd.hash
> > new file mode 100644
> > index 0000000000..be6815725a
> > --- /dev/null
> > +++ b/package/siproxd/siproxd.hash
> > @@ -0,0 +1,11 @@
> > +# Locally calculated after checking pgp signature from:
> > +# https://downloads.sourceforge.net/project/siproxd/siproxd/0.8.3/siproxd-0.8.3.tar.gz.asc
> > +sha256  9a6d7a6bb6fff162775b1e1fb7018de9c69642cbf8626185dc6ffceeeba07736  siproxd-0.8.3.tar.gz
> > +
> > +# https://sourceforge.net/projects/siproxd/files/siproxd/0.8.3/
> > +sha1  d13d4a05b8a16dbe20d04b99b535610e49050d9d  siproxd-0.8.3.tar.gz
> > +md5  9a9d2c89e5f0c59fdde9444a66d8372c  siproxd-0.8.3.tar.gz
> > +
> > +# Hash for license files:
> > +sha256  231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c  COPYING
> > +sha256  f18a0811fa0e220ccbc42f661545e77f0388631e209585ed582a1c693029c6aa  libltdl/COPYING.LIB
> > diff --git a/package/siproxd/siproxd.mk b/package/siproxd/siproxd.mk
> > new file mode 100644
> > index 0000000000..624b948699
> > --- /dev/null
> > +++ b/package/siproxd/siproxd.mk
> > @@ -0,0 +1,24 @@
> > +################################################################################
> > +#
> > +# siproxd
> > +#
> > +################################################################################
> > +
> > +SIPROXD_VERSION = 0.8.3
> > +SIPROXD_SITE = https://downloads.sourceforge.net/project/siproxd/siproxd/$(SIPROXD_VERSION)
> > +
> > +SIPROXD_LICENSE = GPL-2.0+
> > +SIPROXD_LICENSE_FILES = COPYING
> > +
> > +SIPROXD_DEPENDENCIES = libosip2 sqlite
> > +
> > +ifeq ($(BR2_PACKAGE_LIBTOOL),y)
> > +SIPROXD_CONF_OPTS += --without-included-ltdl
> > +SIPROXD_DEPENDENCIES += libtool
> > +else
> > +SIPROXD_CONF_OPTS += --with-included-ltdl
> > +SIPROXD_LICENSE += , LGPL-2.1+
> > +SIPROXD_LICENSE_FILES += libltdl/COPYING.LIB
> > +endif
> > +
> > +$(eval $(autotools-package))
> > 
> > base-commit: da6cca38da1584fed17ffb40316cd7c2fdd5e754
> > -- 
> > 2.20.1
> > 
> > _______________________________________________
> > buildroot mailing list
> > buildroot@busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
> 
> -- 
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
Alexander Dahl March 15, 2021, 7:56 a.m. UTC | #3 
Hello,

On Sun, Mar 14, 2021 at 06:23:24PM +0100, Yann E. MORIN wrote:
> On 2021-03-10 08:38 +0100, Alexander Dahl spake thusly:
> > Siproxd is a masquerading SIP Proxy Server.  We had a buildroot package
> > for that in the fli4l Linux router distribution for years with different
> > authors contributing.
> > 
> > Co-authored-by: Christoph Schulz <fli4l@kristov.de>
> > Co-authored-by: Claas Hilbrecht <babel@fli4l.de>
> > Signed-off-by: Alexander Dahl <post@lespocky.de>
> > ---
> > 
> > Notes:
> >     Actually what we had in fli4l was a package for 0.8.2.  I revised it and
> >     covered all things check-packaged complained about.  Tested on x86_64
> >     with uclibc toolchain.  Builds fine on all fli4l targets (x86, x86_64,
> >     rpi, sunxi).  This is basically just upstreaming effort.  I marked it as
> >     v1, because I expect some remarks and little things to be changed.
> 
> I've made use of an external libtool unconditional, and applied to
> master, thanks.

That has an implication, which came to my mind, see below.

> 
> Regards,
> Yann E. MORIN.
> 
> >  DEVELOPERS                   |  1 +
> >  package/Config.in            |  1 +
> >  package/siproxd/Config.in    | 16 ++++++++++++++++
> >  package/siproxd/siproxd.hash | 11 +++++++++++
> >  package/siproxd/siproxd.mk   | 24 ++++++++++++++++++++++++
> >  5 files changed, 53 insertions(+)
> >  create mode 100644 package/siproxd/Config.in
> >  create mode 100644 package/siproxd/siproxd.hash
> >  create mode 100644 package/siproxd/siproxd.mk
> > 
> > diff --git a/DEVELOPERS b/DEVELOPERS
> > index f6d6e4aa06..a7a0c30bd6 100644
> > --- a/DEVELOPERS
> > +++ b/DEVELOPERS
> > @@ -70,6 +70,7 @@ F:	package/odhcp6c/
> >  N:	Alexander Dahl <post@lespocky.de>
> >  F:	package/fastd/
> >  F:	package/libuecc/
> > +F:	package/siproxd/
> >  F:	package/putty/
> >  
> >  N:	Alexander Egorenkov <egorenar-dev@posteo.net>
> > diff --git a/package/Config.in b/package/Config.in
> > index 992e46a319..d919e71cb3 100644
> > --- a/package/Config.in
> > +++ b/package/Config.in
> > @@ -1828,6 +1828,7 @@ menu "Networking"
> >  	source "package/resiprocate/Config.in"
> >  	source "package/restclient-cpp/Config.in"
> >  	source "package/rtmpdump/Config.in"
> > +	source "package/siproxd/Config.in"
> >  	source "package/slirp/Config.in"
> >  	source "package/snmppp/Config.in"
> >  	source "package/sofia-sip/Config.in"
> > diff --git a/package/siproxd/Config.in b/package/siproxd/Config.in
> > new file mode 100644
> > index 0000000000..6939033025
> > --- /dev/null
> > +++ b/package/siproxd/Config.in
> > @@ -0,0 +1,16 @@
> > +config BR2_PACKAGE_SIPROXD
> > +	bool "siproxd"
> > +	select BR2_PACKAGE_LIBOSIP2
> > +	select BR2_PACKAGE_SQLITE
> > +	help
> > +	  Siproxd is a proxy/masquerading daemon for SIP (Session
> > +	  Initiation Protocol), which is used in IP telephony. It
> > +	  handles registrations of SIP clients on a private IP network
> > +	  and performs rewriting of the SIP message bodies to make SIP
> > +	  connections work via a masquerading firewall (NAT). It allows
> > +	  SIP software clients (like kphone, linphone) or SIP hardware
> > +	  clients (Voice over IP phones which are SIP-compatible, such
> > +	  as those from Cisco, Grandstream or Snom) to work behind an IP
> > +	  masquerading firewall or NAT router.
> > +
> > +	  http://siproxd.sourceforge.net/
> > diff --git a/package/siproxd/siproxd.hash b/package/siproxd/siproxd.hash
> > new file mode 100644
> > index 0000000000..be6815725a
> > --- /dev/null
> > +++ b/package/siproxd/siproxd.hash
> > @@ -0,0 +1,11 @@
> > +# Locally calculated after checking pgp signature from:
> > +# https://downloads.sourceforge.net/project/siproxd/siproxd/0.8.3/siproxd-0.8.3.tar.gz.asc
> > +sha256  9a6d7a6bb6fff162775b1e1fb7018de9c69642cbf8626185dc6ffceeeba07736  siproxd-0.8.3.tar.gz
> > +
> > +# https://sourceforge.net/projects/siproxd/files/siproxd/0.8.3/
> > +sha1  d13d4a05b8a16dbe20d04b99b535610e49050d9d  siproxd-0.8.3.tar.gz
> > +md5  9a9d2c89e5f0c59fdde9444a66d8372c  siproxd-0.8.3.tar.gz
> > +
> > +# Hash for license files:
> > +sha256  231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c  COPYING
> > +sha256  f18a0811fa0e220ccbc42f661545e77f0388631e209585ed582a1c693029c6aa  libltdl/COPYING.LIB

If libltdl is external, that line can be dropped, right?

Greets
Alex

> > diff --git a/package/siproxd/siproxd.mk b/package/siproxd/siproxd.mk
> > new file mode 100644
> > index 0000000000..624b948699
> > --- /dev/null
> > +++ b/package/siproxd/siproxd.mk
> > @@ -0,0 +1,24 @@
> > +################################################################################
> > +#
> > +# siproxd
> > +#
> > +################################################################################
> > +
> > +SIPROXD_VERSION = 0.8.3
> > +SIPROXD_SITE = https://downloads.sourceforge.net/project/siproxd/siproxd/$(SIPROXD_VERSION)
> > +
> > +SIPROXD_LICENSE = GPL-2.0+
> > +SIPROXD_LICENSE_FILES = COPYING
> > +
> > +SIPROXD_DEPENDENCIES = libosip2 sqlite
> > +
> > +ifeq ($(BR2_PACKAGE_LIBTOOL),y)
> > +SIPROXD_CONF_OPTS += --without-included-ltdl
> > +SIPROXD_DEPENDENCIES += libtool
> > +else
> > +SIPROXD_CONF_OPTS += --with-included-ltdl
> > +SIPROXD_LICENSE += , LGPL-2.1+
> > +SIPROXD_LICENSE_FILES += libltdl/COPYING.LIB
> > +endif
> > +
> > +$(eval $(autotools-package))
> > 
> > base-commit: da6cca38da1584fed17ffb40316cd7c2fdd5e754
> > -- 
> > 2.20.1
> > 
> > _______________________________________________
> > buildroot mailing list
> > buildroot@busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
> 
> -- 
> .-----------------.--------------------.------------------.--------------------.
> |  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
> | +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
> '------------------------------^-------^------------------^--------------------'
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
diff mbox series

Patch

diff --git a/DEVELOPERS b/DEVELOPERS
index f6d6e4aa06..a7a0c30bd6 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -70,6 +70,7 @@  F:	package/odhcp6c/
 N:	Alexander Dahl <post@lespocky.de>
 F:	package/fastd/
 F:	package/libuecc/
+F:	package/siproxd/
 F:	package/putty/
 
 N:	Alexander Egorenkov <egorenar-dev@posteo.net>
diff --git a/package/Config.in b/package/Config.in
index 992e46a319..d919e71cb3 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1828,6 +1828,7 @@  menu "Networking"
 	source "package/resiprocate/Config.in"
 	source "package/restclient-cpp/Config.in"
 	source "package/rtmpdump/Config.in"
+	source "package/siproxd/Config.in"
 	source "package/slirp/Config.in"
 	source "package/snmppp/Config.in"
 	source "package/sofia-sip/Config.in"
diff --git a/package/siproxd/Config.in b/package/siproxd/Config.in
new file mode 100644
index 0000000000..6939033025
--- /dev/null
+++ b/package/siproxd/Config.in
@@ -0,0 +1,16 @@ 
+config BR2_PACKAGE_SIPROXD
+	bool "siproxd"
+	select BR2_PACKAGE_LIBOSIP2
+	select BR2_PACKAGE_SQLITE
+	help
+	  Siproxd is a proxy/masquerading daemon for SIP (Session
+	  Initiation Protocol), which is used in IP telephony. It
+	  handles registrations of SIP clients on a private IP network
+	  and performs rewriting of the SIP message bodies to make SIP
+	  connections work via a masquerading firewall (NAT). It allows
+	  SIP software clients (like kphone, linphone) or SIP hardware
+	  clients (Voice over IP phones which are SIP-compatible, such
+	  as those from Cisco, Grandstream or Snom) to work behind an IP
+	  masquerading firewall or NAT router.
+
+	  http://siproxd.sourceforge.net/
diff --git a/package/siproxd/siproxd.hash b/package/siproxd/siproxd.hash
new file mode 100644
index 0000000000..be6815725a
--- /dev/null
+++ b/package/siproxd/siproxd.hash
@@ -0,0 +1,11 @@ 
+# Locally calculated after checking pgp signature from:
+# https://downloads.sourceforge.net/project/siproxd/siproxd/0.8.3/siproxd-0.8.3.tar.gz.asc
+sha256  9a6d7a6bb6fff162775b1e1fb7018de9c69642cbf8626185dc6ffceeeba07736  siproxd-0.8.3.tar.gz
+
+# https://sourceforge.net/projects/siproxd/files/siproxd/0.8.3/
+sha1  d13d4a05b8a16dbe20d04b99b535610e49050d9d  siproxd-0.8.3.tar.gz
+md5  9a9d2c89e5f0c59fdde9444a66d8372c  siproxd-0.8.3.tar.gz
+
+# Hash for license files:
+sha256  231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c  COPYING
+sha256  f18a0811fa0e220ccbc42f661545e77f0388631e209585ed582a1c693029c6aa  libltdl/COPYING.LIB
diff --git a/package/siproxd/siproxd.mk b/package/siproxd/siproxd.mk
new file mode 100644
index 0000000000..624b948699
--- /dev/null
+++ b/package/siproxd/siproxd.mk
@@ -0,0 +1,24 @@ 
+################################################################################
+#
+# siproxd
+#
+################################################################################
+
+SIPROXD_VERSION = 0.8.3
+SIPROXD_SITE = https://downloads.sourceforge.net/project/siproxd/siproxd/$(SIPROXD_VERSION)
+
+SIPROXD_LICENSE = GPL-2.0+
+SIPROXD_LICENSE_FILES = COPYING
+
+SIPROXD_DEPENDENCIES = libosip2 sqlite
+
+ifeq ($(BR2_PACKAGE_LIBTOOL),y)
+SIPROXD_CONF_OPTS += --without-included-ltdl
+SIPROXD_DEPENDENCIES += libtool
+else
+SIPROXD_CONF_OPTS += --with-included-ltdl
+SIPROXD_LICENSE += , LGPL-2.1+
+SIPROXD_LICENSE_FILES += libltdl/COPYING.LIB
+endif
+
+$(eval $(autotools-package))