deleted file mode 100644
@@ -1,279 +0,0 @@
-From 99cade8743158889b3e8db93c003b3318ebd4bda Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
-Date: Sun, 11 Aug 2019 22:38:57 +0200
-Subject: [PATCH] arm: dts: sync dts for Allwinner H6
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Sync Kernel DTS for Allwinner H6 boards.
-
-Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.
-
-commit <d45331b00ddb> Linux 5.3-rc4
-
-Signed-off-by: Clément Péron <peron.clem@gmail.com>
----
- arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 ++++++++++++++++++++++++++
- arch/arm/dts/sun50i-h6-pine-h64.dts | 12 ++++
- arch/arm/dts/sun50i-h6.dtsi | 46 +++++++++++++++-
- 3 files changed, 131 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-index 54b0882bed..0dc33c90dd 100644
---- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
-@@ -14,6 +14,7 @@
- compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
-
- aliases {
-+ ethernet0 = &emac;
- serial0 = &uart0;
- };
-
-@@ -21,6 +22,17 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -41,6 +53,40 @@
- };
- };
-
-+&de {
-+ status = "okay";
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ext_rgmii_pins>;
-+ phy-mode = "rgmii";
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-supply = <®_aldo2>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
- &mmc0 {
- vmmc-supply = <®_cldo1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-@@ -57,6 +103,15 @@
- status = "okay";
- };
-
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ vcc-pd-supply = <®_cldo1>;
-+ vcc-pg-supply = <®_aldo1>;
-+};
-+
- &r_i2c {
- status = "okay";
-
-@@ -177,8 +232,29 @@
- };
- };
-
-+&r_pio {
-+ /*
-+ * PL0 and PL1 are used for PMIC I2C
-+ * don't enable the pl-supply else
-+ * it will fail at boot
-+ *
-+ * vcc-pl-supply = <®_aldo1>;
-+ */
-+ vcc-pm-supply = <®_aldo1>;
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
- };
-+
-+&usb2otg {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usb2phy {
-+ usb0_vbus-supply = <®_vcc5v>;
-+ status = "okay";
-+};
-diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
-index 4802902e12..1898345183 100644
---- a/arch/arm/dts/sun50i-h6-pine-h64.dts
-+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
-@@ -127,6 +127,12 @@
- status = "okay";
- };
-
-+&pio {
-+ vcc-pc-supply = <®_bldo2>;
-+ vcc-pd-supply = <®_cldo1>;
-+ vcc-pg-supply = <®_aldo1>;
-+};
-+
- &r_i2c {
- status = "okay";
-
-@@ -243,10 +249,16 @@
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
-+ interrupt-parent = <&r_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <0>;
- };
- };
-
-+&r_pio {
-+ vcc-pm-supply = <®_aldo1>;
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
-diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
-index e0dc4a05c1..a117f479ae 100644
---- a/arch/arm/dts/sun50i-h6.dtsi
-+++ b/arch/arm/dts/sun50i-h6.dtsi
-@@ -101,7 +101,7 @@
- #size-cells = <1>;
- ranges;
-
-- display-engine@1000000 {
-+ bus@1000000 {
- compatible = "allwinner,sun50i-h6-de3",
- "allwinner,sun50i-a64-de2";
- reg = <0x1000000 0x400000>;
-@@ -203,11 +203,32 @@
- #reset-cells = <1>;
- };
-
-+ dma: dma-controller@3002000 {
-+ compatible = "allwinner,sun50i-h6-dma";
-+ reg = <0x03002000 0x1000>;
-+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
-+ clock-names = "bus", "mbus";
-+ dma-channels = <16>;
-+ dma-requests = <46>;
-+ resets = <&ccu RST_BUS_DMA>;
-+ #dma-cells = <1>;
-+ };
-+
- sid: sid@3006000 {
- compatible = "allwinner,sun50i-h6-sid";
- reg = <0x03006000 0x400>;
- };
-
-+ watchdog: watchdog@30090a0 {
-+ compatible = "allwinner,sun50i-h6-wdt",
-+ "allwinner,sun6i-a31-wdt";
-+ reg = <0x030090a0 0x20>;
-+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-+ /* Broken on some H6 boards */
-+ status = "disabled";
-+ };
-+
- pio: pinctrl@300b000 {
- compatible = "allwinner,sun50i-h6-pinctrl";
- reg = <0x0300b000 0x400>;
-@@ -243,6 +264,18 @@
- bias-pull-up;
- };
-
-+ /*
-+ * /omit-if-no-ref/ isn't supported by U-boot
-+ * keep this comment to avoid bad sync with Linux
-+ */
-+ mmc1_pins: mmc1-pins {
-+ pins = "PG0", "PG1", "PG2", "PG3",
-+ "PG4", "PG5";
-+ function = "mmc1";
-+ drive-strength = <30>;
-+ bias-pull-up;
-+ };
-+
- mmc2_pins: mmc2-pins {
- pins = "PC1", "PC4", "PC5", "PC6",
- "PC7", "PC8", "PC9", "PC10",
-@@ -294,6 +327,8 @@
- resets = <&ccu RST_BUS_MMC1>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -445,7 +480,6 @@
- resets = <&ccu RST_BUS_OHCI3>,
- <&ccu RST_BUS_EHCI3>;
- phys = <&usb2phy 3>;
-- phy-names = "usb";
- status = "disabled";
- };
-
-@@ -457,7 +491,6 @@
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_OHCI3>;
- phys = <&usb2phy 3>;
-- phy-names = "usb";
- status = "disabled";
- };
-
-@@ -613,6 +646,13 @@
- #reset-cells = <1>;
- };
-
-+ r_watchdog: watchdog@7020400 {
-+ compatible = "allwinner,sun50i-h6-wdt",
-+ "allwinner,sun6i-a31-wdt";
-+ reg = <0x07020400 0x20>;
-+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- r_intc: interrupt-controller@7021000 {
- compatible = "allwinner,sun50i-h6-r-intc",
- "allwinner,sun6i-a31-r-intc";
-2.20.1
-
@@ -8,7 +8,6 @@ BR2_SYSTEM_DHCP="eth0"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
-BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
# Kernel Linux headers same as kernel, a 5.3 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
@@ -32,7 +31,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beelink_gs1"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
The U-boot patch has been upstreamed. Bump U-boot version and drop the patch. Signed-off-by: Clément Péron <peron.clem@gmail.com> --- ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ------------------ configs/beelink_gs1_defconfig | 3 +- 2 files changed, 1 insertion(+), 281 deletions(-) delete mode 100644 board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch