diff mbox series

[1/3] board: add Beelink GS1 support

Message ID 20190920190813.21516-2-peron.clem@gmail.com
State Changes Requested
Headers show
Series Add Beelink GS1 board | expand

Commit Message

Clément Péron Sept. 20, 2019, 7:08 p.m. UTC 
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 board/beelink/gs1/extlinux.conf               |   4 +
 board/beelink/gs1/genimage.cfg                |  33 +++
 ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
 ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++
 board/beelink/gs1/post-build.sh               |   4 +
 configs/beelink_gs1_defconfig                 |  35 +++
 6 files changed, 394 insertions(+)
 create mode 100644 board/beelink/gs1/extlinux.conf
 create mode 100644 board/beelink/gs1/genimage.cfg
 create mode 100644 board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch
 create mode 100644 board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
 create mode 100755 board/beelink/gs1/post-build.sh
 create mode 100644 configs/beelink_gs1_defconfig

Comments

Thomas Petazzoni Oct. 26, 2019, 8:07 a.m. UTC | #1 
Hello Clément,

Sorry for the slow feedback.

On Fri, 20 Sep 2019 21:08:11 +0200
Clément Péron <peron.clem@gmail.com> wrote:

>  board/beelink/gs1/extlinux.conf               |   4 +
>  board/beelink/gs1/genimage.cfg                |  33 +++
>  ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
>  ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++

Perhaps these patches have been merged upstream now ?

> diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
> new file mode 100644
> index 0000000000..d1a21a4a6d
> --- /dev/null
> +++ b/configs/beelink_gs1_defconfig
> @@ -0,0 +1,35 @@
> +# Architecture
> +BR2_aarch64=y
> +BR2_ARM_FPU_VFPV4=y
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
> +BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y

Please define an explicit kernel version, so that it is using a known
working version.

> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +
> +# Firmware
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
> +
> +# Bootloader
> +BR2_TARGET_UBOOT=y

Please define an explicit U-Boot version, for the same reason as above.

Also, please add yourself in the DEVELOPERS file, for both the
defconfig and the board folder you're adding.

Could you send a v2 fixing those details ?

Thanks a lot!

Thomas Petazzoni
Clément Péron Oct. 26, 2019, 8:56 a.m. UTC | #2 
Hello Thomas,

On Sat, 26 Oct 2019 at 10:07, Thomas Petazzoni
<thomas.petazzoni@bootlin.com> wrote:
>
> Hello Clément,
>
> Sorry for the slow feedback.
>
> On Fri, 20 Sep 2019 21:08:11 +0200
> Clément Péron <peron.clem@gmail.com> wrote:
>
> >  board/beelink/gs1/extlinux.conf               |   4 +
> >  board/beelink/gs1/genimage.cfg                |  33 +++
> >  ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
> >  ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++
>
> Perhaps these patches have been merged upstream now ?

One has been merged in A-TF v2.2 which is one week old.
I didn't have time to test it right now

The second is still not merged in U-boot 2019.10

>
> > diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
> > new file mode 100644
> > index 0000000000..d1a21a4a6d
> > --- /dev/null
> > +++ b/configs/beelink_gs1_defconfig
> > @@ -0,0 +1,35 @@
> > +# Architecture
> > +BR2_aarch64=y
> > +BR2_ARM_FPU_VFPV4=y
> > +BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
> > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
> > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
> > +BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
> > +
> > +# Kernel
> > +BR2_LINUX_KERNEL=y
>
> Please define an explicit kernel version, so that it is using a known
> working version.

OK

>
> > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> > +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
> > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > +BR2_TARGET_ROOTFS_EXT2=y
> > +BR2_TARGET_ROOTFS_EXT2_4=y
> > +
> > +# Firmware
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
> > +
> > +# Bootloader
> > +BR2_TARGET_UBOOT=y
>
> Please define an explicit U-Boot version, for the same reason as above.

OK

>
> Also, please add yourself in the DEVELOPERS file, for both the
> defconfig and the board folder you're adding.
>
> Could you send a v2 fixing those details ?

Yes,

Do you think the other patches can be merged too or are they to
"user-specific" ?

>
> Thanks a lot!
Thanks for the review,

>
> Thomas Petazzoni
> --
> Thomas Petazzoni, CTO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Thomas Petazzoni Oct. 26, 2019, 9:56 a.m. UTC | #3 
On Sat, 26 Oct 2019 10:56:02 +0200
Clément Péron <peron.clem@gmail.com> wrote:

> Do you think the other patches can be merged too or are they to
> "user-specific" ?

As Arnout said, PATCH 3/3, for the part that enables DHCP on eth0, can
be added using BR2_SYSTEM_DHCP="eth0". This is acceptable upstream.

Customizing the root password is not, as is adding autossh and dropbear.

Adding mdev could be acceptable, for example if it's needed to load
some kernel modules.

Best regards,

Thomas
Clément Péron Oct. 26, 2019, 9:58 a.m. UTC | #4 
On Sat, 26 Oct 2019 at 11:56, Thomas Petazzoni
<thomas.petazzoni@bootlin.com> wrote:
>
> On Sat, 26 Oct 2019 10:56:02 +0200
> Clément Péron <peron.clem@gmail.com> wrote:
>
> > Do you think the other patches can be merged too or are they to
> > "user-specific" ?
>
> As Arnout said, PATCH 3/3, for the part that enables DHCP on eth0, can
> be added using BR2_SYSTEM_DHCP="eth0". This is acceptable upstream.
>
> Customizing the root password is not, as is adding autossh and dropbear.
>
> Adding mdev could be acceptable, for example if it's needed to load
> some kernel modules.
Yes it is,

Thanks
Clément

>
> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Arnout Vandecappelle Oct. 27, 2019, 8:19 a.m. UTC | #5 
On 26/10/2019 11:58, Clément Péron wrote:
> On Sat, 26 Oct 2019 at 11:56, Thomas Petazzoni
> <thomas.petazzoni@bootlin.com> wrote:
>>
>> On Sat, 26 Oct 2019 10:56:02 +0200
>> Clément Péron <peron.clem@gmail.com> wrote:
>>
>>> Do you think the other patches can be merged too or are they to
>>> "user-specific" ?
>>
>> As Arnout said, PATCH 3/3, for the part that enables DHCP on eth0, can
>> be added using BR2_SYSTEM_DHCP="eth0". This is acceptable upstream.
>>
>> Customizing the root password is not, as is adding autossh and dropbear.
>>
>> Adding mdev could be acceptable, for example if it's needed to load
>> some kernel modules.
> Yes it is,

 It helps if you put a comment in the defconfig that says why it is needed (e.g.
"to autoload ethernet driver module").

 Regards,
 Arnout
diff mbox series

Patch

diff --git a/board/beelink/gs1/extlinux.conf b/board/beelink/gs1/extlinux.conf
new file mode 100644
index 0000000000..046681f71d
--- /dev/null
+++ b/board/beelink/gs1/extlinux.conf
@@ -0,0 +1,4 @@ 
+label linux
+  kernel /Image
+  devicetree /sun50i-h6-beelink-gs1.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/beelink/gs1/genimage.cfg b/board/beelink/gs1/genimage.cfg
new file mode 100644
index 0000000000..88bbd26594
--- /dev/null
+++ b/board/beelink/gs1/genimage.cfg
@@ -0,0 +1,33 @@ 
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h6-beelink-gs1.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8192
+		size = 1040384 # 1MB - 8192
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch b/board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch
new file mode 100644
index 0000000000..9443fdd568
--- /dev/null
+++ b/board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch
@@ -0,0 +1,39 @@ 
+From 523ab5be1a84e9aa15fb62c3a15a6338b01d3961 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
+Date: Tue, 9 Apr 2019 00:15:06 +0200
+Subject: [PATCH] plat: allwinner: common: use r_wdog instead of wdog
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Some Allwinner H6 has a broken watchdog that doesn't
+make the soc reboot.
+
+Use the R_WATCHDOG instead.
+
+Signed-off-by: Clément Péron <peron.clem@gmail.com>
+Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba
+---
+ plat/allwinner/common/sunxi_pm.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/plat/allwinner/common/sunxi_pm.c b/plat/allwinner/common/sunxi_pm.c
+index 1d2dc938..13e13532 100644
+--- a/plat/allwinner/common/sunxi_pm.c
++++ b/plat/allwinner/common/sunxi_pm.c
+@@ -20,9 +20,9 @@
+ #include <sunxi_mmap.h>
+ #include <sunxi_private.h>
+ 
+-#define SUNXI_WDOG0_CTRL_REG		(SUNXI_WDOG_BASE + 0x0010)
+-#define SUNXI_WDOG0_CFG_REG		(SUNXI_WDOG_BASE + 0x0014)
+-#define SUNXI_WDOG0_MODE_REG		(SUNXI_WDOG_BASE + 0x0018)
++#define SUNXI_WDOG0_CTRL_REG		(SUNXI_R_WDOG_BASE + 0x0010)
++#define SUNXI_WDOG0_CFG_REG		(SUNXI_R_WDOG_BASE + 0x0014)
++#define SUNXI_WDOG0_MODE_REG		(SUNXI_R_WDOG_BASE + 0x0018)
+ 
+ #define mpidr_is_valid(mpidr) ( \
+ 	MPIDR_AFFLVL3_VAL(mpidr) == 0 && \
+-- 
+2.20.1
+
diff --git a/board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch b/board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
new file mode 100644
index 0000000000..8e695f6416
--- /dev/null
+++ b/board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
@@ -0,0 +1,279 @@ 
+From 99cade8743158889b3e8db93c003b3318ebd4bda Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
+Date: Sun, 11 Aug 2019 22:38:57 +0200
+Subject: [PATCH] arm: dts: sync dts for Allwinner H6
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Sync Kernel DTS for Allwinner H6 boards.
+
+Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.
+
+commit <d45331b00ddb> Linux 5.3-rc4
+
+Signed-off-by: Clément Péron <peron.clem@gmail.com>
+---
+ arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 ++++++++++++++++++++++++++
+ arch/arm/dts/sun50i-h6-pine-h64.dts    | 12 ++++
+ arch/arm/dts/sun50i-h6.dtsi            | 46 +++++++++++++++-
+ 3 files changed, 131 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+index 54b0882bed..0dc33c90dd 100644
+--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
++++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+@@ -14,6 +14,7 @@
+ 	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+ 
+ 	aliases {
++		ethernet0 = &emac;
+ 		serial0 = &uart0;
+ 	};
+ 
+@@ -21,6 +22,17 @@
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
++	connector {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -41,6 +53,40 @@
+ 	};
+ };
+ 
++&de {
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&emac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ext_rgmii_pins>;
++	phy-mode = "rgmii";
++	phy-handle = <&ext_rgmii_phy>;
++	phy-supply = <&reg_aldo2>;
++	status = "okay";
++};
++
++&hdmi {
++	status = "okay";
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&mdio {
++	ext_rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++	};
++};
++
+ &mmc0 {
+ 	vmmc-supply = <&reg_cldo1>;
+ 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+@@ -57,6 +103,15 @@
+ 	status = "okay";
+ };
+ 
++&ohci0 {
++	status = "okay";
++};
++
++&pio {
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_aldo1>;
++};
++
+ &r_i2c {
+ 	status = "okay";
+ 
+@@ -177,8 +232,29 @@
+ 	};
+ };
+ 
++&r_pio {
++	/*
++	 * PL0 and PL1 are used for PMIC I2C
++	 * don't enable the pl-supply else
++	 * it will fail at boot
++	 *
++	 * vcc-pl-supply = <&reg_aldo1>;
++	 */
++	vcc-pm-supply = <&reg_aldo1>;
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_ph_pins>;
+ 	status = "okay";
+ };
++
++&usb2otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb2phy {
++	usb0_vbus-supply = <&reg_vcc5v>;
++	status = "okay";
++};
+diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
+index 4802902e12..1898345183 100644
+--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
++++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
+@@ -127,6 +127,12 @@
+ 	status = "okay";
+ };
+ 
++&pio {
++	vcc-pc-supply = <&reg_bldo2>;
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_aldo1>;
++};
++
+ &r_i2c {
+ 	status = "okay";
+ 
+@@ -243,10 +249,16 @@
+ 	pcf8563: rtc@51 {
+ 		compatible = "nxp,pcf8563";
+ 		reg = <0x51>;
++		interrupt-parent = <&r_intc>;
++		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ 		#clock-cells = <0>;
+ 	};
+ };
+ 
++&r_pio {
++	vcc-pm-supply = <&reg_aldo1>;
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_ph_pins>;
+diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
+index e0dc4a05c1..a117f479ae 100644
+--- a/arch/arm/dts/sun50i-h6.dtsi
++++ b/arch/arm/dts/sun50i-h6.dtsi
+@@ -101,7 +101,7 @@
+ 		#size-cells = <1>;
+ 		ranges;
+ 
+-		display-engine@1000000 {
++		bus@1000000 {
+ 			compatible = "allwinner,sun50i-h6-de3",
+ 				     "allwinner,sun50i-a64-de2";
+ 			reg = <0x1000000 0x400000>;
+@@ -203,11 +203,32 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		dma: dma-controller@3002000 {
++			compatible = "allwinner,sun50i-h6-dma";
++			reg = <0x03002000 0x1000>;
++			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
++			clock-names = "bus", "mbus";
++			dma-channels = <16>;
++			dma-requests = <46>;
++			resets = <&ccu RST_BUS_DMA>;
++			#dma-cells = <1>;
++		};
++
+ 		sid: sid@3006000 {
+ 			compatible = "allwinner,sun50i-h6-sid";
+ 			reg = <0x03006000 0x400>;
+ 		};
+ 
++		watchdog: watchdog@30090a0 {
++			compatible = "allwinner,sun50i-h6-wdt",
++				     "allwinner,sun6i-a31-wdt";
++			reg = <0x030090a0 0x20>;
++			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
++			/* Broken on some H6 boards */
++			status = "disabled";
++		};
++
+ 		pio: pinctrl@300b000 {
+ 			compatible = "allwinner,sun50i-h6-pinctrl";
+ 			reg = <0x0300b000 0x400>;
+@@ -243,6 +264,18 @@
+ 				bias-pull-up;
+ 			};
+ 
++			/*
++			 * /omit-if-no-ref/ isn't supported by U-boot
++			 * keep this comment to avoid bad sync with Linux
++			 */
++			mmc1_pins: mmc1-pins {
++				pins = "PG0", "PG1", "PG2", "PG3",
++				       "PG4", "PG5";
++				function = "mmc1";
++				drive-strength = <30>;
++				bias-pull-up;
++			};
++
+ 			mmc2_pins: mmc2-pins {
+ 				pins = "PC1", "PC4", "PC5", "PC6",
+ 				       "PC7", "PC8", "PC9", "PC10",
+@@ -294,6 +327,8 @@
+ 			resets = <&ccu RST_BUS_MMC1>;
+ 			reset-names = "ahb";
+ 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&mmc1_pins>;
+ 			status = "disabled";
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+@@ -445,7 +480,6 @@
+ 			resets = <&ccu RST_BUS_OHCI3>,
+ 				 <&ccu RST_BUS_EHCI3>;
+ 			phys = <&usb2phy 3>;
+-			phy-names = "usb";
+ 			status = "disabled";
+ 		};
+ 
+@@ -457,7 +491,6 @@
+ 				 <&ccu CLK_USB_OHCI3>;
+ 			resets = <&ccu RST_BUS_OHCI3>;
+ 			phys = <&usb2phy 3>;
+-			phy-names = "usb";
+ 			status = "disabled";
+ 		};
+ 
+@@ -613,6 +646,13 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		r_watchdog: watchdog@7020400 {
++			compatible = "allwinner,sun50i-h6-wdt",
++				     "allwinner,sun6i-a31-wdt";
++			reg = <0x07020400 0x20>;
++			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
++		};
++
+ 		r_intc: interrupt-controller@7021000 {
+ 			compatible = "allwinner,sun50i-h6-r-intc",
+ 				     "allwinner,sun6i-a31-r-intc";
+-- 
+2.20.1
+
diff --git a/board/beelink/gs1/post-build.sh b/board/beelink/gs1/post-build.sh
new file mode 100755
index 0000000000..ec20fca7d9
--- /dev/null
+++ b/board/beelink/gs1/post-build.sh
@@ -0,0 +1,4 @@ 
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
new file mode 100644
index 0000000000..d1a21a4a6d
--- /dev/null
+++ b/configs/beelink_gs1_defconfig
@@ -0,0 +1,35 @@ 
+# Architecture
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
+BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beelink_gs1"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y