| Message ID | 20181227160806.4466-1-nerv@dawncrow.de |
|---|---|
| State | Accepted |
| Commit | 9c82c51ec929e6a0ed802b1020d6f7d68b1016ee |
| Headers | show |
| Series | [1/3] board/freescale/imx8mqevk: Fix typos in readme | expand |
Hello, On Thu, 27 Dec 2018 17:08:04 +0100, André Hentschel wrote: > Signed-off-by: André Hentschel <nerv@dawncrow.de> > --- > board/freescale/imx8mqevk/readme.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) All three patches applied to master, thanks! I've marked the previous series of 9 patches as "Changes Requested" in patchwork. Could you remember to post an updated version of the remaining 6 patches ? Thanks! Thomas
>>>>> "André" == André Hentschel <nerv@dawncrow.de> writes: > Signed-off-by: André Hentschel <nerv@dawncrow.de> Committed to 2018.11.x, thanks.
diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt index a32c122f91..e60eba4cb6 100644 --- a/board/freescale/imx8mqevk/readme.txt +++ b/board/freescale/imx8mqevk/readme.txt @@ -21,7 +21,7 @@ You will find in output/images/ the following files: - boot.vfat - fsl-imx8mq-evk.dtb - Image - - imx-boot-imx8mqevk-sd.bin + - imx8-boot-sd.bin - lpddr4_pmu_train_fw.bin - rootfs.ext2 - rootfs.ext4 @@ -69,7 +69,7 @@ Enable HDMI output To enable HDMI output at boot you must provide the video kernel boot argument. To set the video boot argument from U-Boot run after -stoping in U-Boot prompt: +stopping in U-Boot prompt: setenv mmcargs 'setenv bootargs console=${console} root=${mmcroot} video=HDMI-A-1:1920x1080-32@60' saveenv
Signed-off-by: André Hentschel <nerv@dawncrow.de> --- board/freescale/imx8mqevk/readme.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)