@@ -75,7 +75,7 @@ Then flash the SD card as explained above.
Running kmscube application:
-# kmscube -D /dev/dri/card1
+# kmscube
Running Qt5 Cinematic Demo:
@@ -1,5 +1,5 @@
{
- "device": "/dev/dri/card1",
+ "device": "/dev/dri/card0",
"hwcursor": false,
"pbuffers": true,
"outputs": [
@@ -4,8 +4,8 @@ BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 4.11 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
+# Linux headers same as kernel, a 4.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
# Additional features needed for packages
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
@@ -38,7 +38,7 @@ BR2_TARGET_UBOOT_SPL_NAME="SPL"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.3"
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-sabresd imx6dl-sabresd imx6qp-sabresd"
Bump the kernel version to 4.13.3. Kernel 4.13.3 uses the /dev/dri/card0 device as rendering node, so adjust it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- board/freescale/imx6-sabresd/readme.txt | 2 +- board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json | 2 +- configs/imx6-sabresd_qt5_defconfig | 6 +++--- 3 files changed, 5 insertions(+), 5 deletions(-)