diff mbox series

[PULL,67/74] i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled

Message ID 1534870966-9287-68-git-send-email-pbonzini@redhat.com
State New
Headers show
Series [PULL,01/74] tests: virtio: separate ccw tests from libqos | expand

Commit Message

Paolo Bonzini Aug. 21, 2018, 5:02 p.m. UTC 
From: Corey Minyard <cminyard@mvista.com>

Change 880b1ffe6ec2f0ae "smbus: do not immediately complete commands"
changed pm_smbus to delay setting the host busy bit until the status
register was read, to work around a bug in AMIBIOS.  Unfortunately,
when interrupts are enabled, the status register will never get read
and the processing will never happen.

Modify the code to only delay setting the host busy bit if interrupts
are not enabled.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1534796770-10295-8-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/i2c/pm_smbus.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index 6322f07..91ee444 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -80,9 +80,6 @@  static void smb_transaction(PMSMBus *s)
     I2CBus *bus = s->smbus;
     int ret;
 
-    assert(s->smb_stat & STS_HOST_BUSY);
-    s->smb_stat &= ~STS_HOST_BUSY;
-
     SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
     /* Transaction isn't exec if STS_DEV_ERR bit set */
     if ((s->smb_stat & STS_DEV_ERR) != 0)  {
@@ -209,9 +206,18 @@  error:
 
 static void smb_transaction_start(PMSMBus *s)
 {
-    /* Do not execute immediately the command ; it will be
-     * executed when guest will read SMB_STAT register */
-    s->smb_stat |= STS_HOST_BUSY;
+    if (s->smb_ctl & CTL_INTREN) {
+        smb_transaction(s);
+    } else {
+        /* Do not execute immediately the command; it will be
+         * executed when guest will read SMB_STAT register.  This
+         * is to work around a bug in AMIBIOS (that is working
+         * around another bug in some specific hardware) where
+         * it waits for STS_HOST_BUSY to be set before waiting
+         * checking for status.  If STS_HOST_BUSY doesn't get
+         * set, it gets stuck. */
+        s->smb_stat |= STS_HOST_BUSY;
+    }
 }
 
 static bool
@@ -330,6 +336,7 @@  static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width)
         val = s->smb_stat;
         if (s->smb_stat & STS_HOST_BUSY) {
             /* execute command now */
+            s->smb_stat &= ~STS_HOST_BUSY;
             smb_transaction(s);
         }
         break;