Message ID | 20180816180105.32318-1-matthew.weber@rockwellcollins.com |
---|---|
State | Accepted |
Headers | show |
Series | [1/2] configs/freescale_t2080_qds_rdb_defconfig: new board | expand |
On 16/08/2018 20:01, Matt Weber wrote: > The board is setup to track upstream Linux as the official > vendor support was complete(depricated) at 4.1 via NXP SDKs. > > The target does not build uboot and assumes the user still uses the NXP > suggested prebuilts in the SDK2.0 (last release for PowerPC). If a > uboot is required, the source for SDK2.0 can be found in the following > repo. > http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703 > > Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Both (finally) applied to master, thanks. It would be nice if you could bump the kernel (and also t1040's) to something more recent. Regards, Arnout > --- > > DEVELOPERS already covers my entry with a wildcard catching this one > configs/freescale_t* > --- > configs/freescale_t2080_qds_rdb_defconfig | 25 +++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 configs/freescale_t2080_qds_rdb_defconfig > > diff --git a/configs/freescale_t2080_qds_rdb_defconfig b/configs/freescale_t2080_qds_rdb_defconfig > new file mode 100644 > index 0000000000..3d03c32f7e > --- /dev/null > +++ b/configs/freescale_t2080_qds_rdb_defconfig > @@ -0,0 +1,25 @@ > +# Architecture > +BR2_powerpc64=y > +BR2_powerpc_e6500=y > + > +# Linux headers same as kernel > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y > + > +# Serial port config > +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" > + > +# Kernel > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14" > +BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb" > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +# Filesystem > +BR2_TARGET_ROOTFS_CPIO=y > +BR2_TARGET_ROOTFS_CPIO_GZIP=y > +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y > +# BR2_TARGET_ROOTFS_TAR is not set > + >
diff --git a/configs/freescale_t2080_qds_rdb_defconfig b/configs/freescale_t2080_qds_rdb_defconfig new file mode 100644 index 0000000000..3d03c32f7e --- /dev/null +++ b/configs/freescale_t2080_qds_rdb_defconfig @@ -0,0 +1,25 @@ +# Architecture +BR2_powerpc64=y +BR2_powerpc_e6500=y + +# Linux headers same as kernel +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y + +# Serial port config +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14" +BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_GZIP=y +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y +# BR2_TARGET_ROOTFS_TAR is not set +
The board is setup to track upstream Linux as the official vendor support was complete(depricated) at 4.1 via NXP SDKs. The target does not build uboot and assumes the user still uses the NXP suggested prebuilts in the SDK2.0 (last release for PowerPC). If a uboot is required, the source for SDK2.0 can be found in the following repo. http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703 Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> --- DEVELOPERS already covers my entry with a wildcard catching this one configs/freescale_t* --- configs/freescale_t2080_qds_rdb_defconfig | 25 +++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 configs/freescale_t2080_qds_rdb_defconfig