@@ -201,9 +201,9 @@ ramips_setup_interfaces()
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
+ mikrotik,rb750gr3|\
mikrotik,rbm33g|\
mzk-wdpr|\
- rb750gr3|\
rt-n14u|\
tplink,c20-v4|\
tplink,c50-v3|\
@@ -418,9 +418,6 @@ ramips_board_detect() {
*"R6220")
name="r6220"
;;
- *"RB750Gr3")
- name="rb750gr3"
- ;;
*"RE350 v1")
name="re350-v1"
;;
@@ -132,7 +132,6 @@ platform_check_image() {
psr-680w|\
px-4885-4M|\
px-4885-8M|\
- rb750gr3|\
re6500|\
rp-n53|\
rt5350f-olinuxino|\
@@ -302,6 +301,7 @@ platform_check_image() {
nand_do_platform_check "$board" "$1"
return $?;
;;
+ mikrotik,rb750gr3|\
mikrotik,rbm11g|\
mikrotik,rbm33g|\
re350-v1)
@@ -329,6 +329,7 @@ platform_pre_upgrade() {
local board=$(board_name)
case "$board" in
+ mikrotik,rb750gr3|\
mikrotik,rbm11g|\
mikrotik,rbm33g)
[ -z "$(rootfs_type)" ] && mtd erase firmware
@@ -7,10 +7,10 @@
/ {
compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc";
- model = "MikroTik RB750Gr3";
+ model = "MikroTik RouterBOARD 750Gr3";
aliases {
- led-status = &led_pwr;
+ led-status = &led_usr;
};
memory@0 {
@@ -19,18 +19,19 @@
};
chosen {
- bootargs = "console=ttyS0,57600";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
- led_pwr: pwr {
+ pwr {
label = "rb750gr3:blue:pwr";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
- usr {
+ led_usr: usr {
label = "rb750gr3:green:usr";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
@@ -43,7 +44,7 @@
mode {
label = "mode";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
+ linux,code = <BTN_0>;
};
res {
@@ -64,9 +65,21 @@
};
usb {
- gpio-export,name = "usb";
+ gpio-export,name = "usb_power_off";
gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ // Used to enable power-over-ethernet passthrough to eth4 (according to OEM source).
+ poe_out {
+ gpio-export,name = "poe_passthrough";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe_status {
+ gpio-export,name = "poe_status";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -74,11 +87,11 @@
&spi0 {
status = "okay";
- m25p80@0 {
+ w25q128@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <10000000>;
- m25p,chunked-io = <32>;
+ // XXX matching RBM11/RBM33, untested
+ spi-max-frequency = <3125000>;
partitions {
compatible = "fixed-partitions";
@@ -86,40 +99,61 @@
#size-cells = <1>;
partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
+ label = "RouterBoot";
+ reg = <0x0 0x40000>;
read-only;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0xf000>;
+ read-only;
+ };
+
+ hard_config: partition@f000 {
+ label = "hard_config";
+ reg = <0xf000 0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0xf000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "soft_config";
+ reg = <0x20000 0x1000>;
+ };
+
+ partition@30000 {
+ label = "bios";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
};
- partition@50000 {
+ partition@40000 {
label = "firmware";
- reg = <0x50000 0xfb0000>;
+ reg = <0x040000 0xFC0000>;
};
};
};
};
ðernet {
- mtd-mac-address = <&factory 0xe000>;
+ mtd-mac-address = <&hard_config 0x0010>;
mtd-mac-address-increment = <1>;
};
+
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "i2c", "uart2", "uart3", "pcie", "rgmii2", "jtag";
+ ralink,group = "uart2", "uart3", "jtag", "wdt";
ralink,function = "gpio";
};
};
@@ -275,14 +275,6 @@ define Device/r6220
endef
TARGET_DEVICES += r6220
-define Device/rb750gr3
- DTS := RB750Gr3
- IMAGE_SIZE := $(ralink_default_fw_size_16M)
- DEVICE_TITLE := MikroTik RB750Gr3
- DEVICE_PACKAGES := kmod-usb3 uboot-envtools
-endef
-TARGET_DEVICES += rb750gr3
-
define Device/MikroTik
BLOCKSIZE := 64k
IMAGE_SIZE := 16128k
@@ -294,6 +286,13 @@ define Device/MikroTik
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
+define Device/mikrotik_rb750gr3
+ $(Device/MikroTik)
+ DTS := RB750Gr3
+ DEVICE_TITLE := MikroTik RouterBOARD RB750Gr3
+endef
+TARGET_DEVICES += mikrotik_rb750gr3
+
define Device/mikrotik_rbm33g
$(Device/MikroTik)
DTS := RBM33G
[Repost after rebasing on current master] This patch attempts to support the MikroTik RouterBOARD 750Gr3 "natively", i.e. without reflashing the bootloader. Installation through RouterBoot probably follows the usual MikroTik method (force tftp booting via long press on the reset button, boot openwrt initramfs, and sysupgrade from there). I don't own the hardware, this code is untested. Signed-off-by: Thibaut VARĂˆNE <hacks@slashdirt.org> --- .../linux/ramips/base-files/etc/board.d/02_network | 2 +- target/linux/ramips/base-files/lib/ramips.sh | 3 - .../ramips/base-files/lib/upgrade/platform.sh | 3 +- target/linux/ramips/dts/RB750Gr3.dts | 92 +++++++++++++++------- target/linux/ramips/image/mt7621.mk | 15 ++-- 5 files changed, 73 insertions(+), 42 deletions(-)