diff mbox series

[v7,01/13] mesh: factor out mesh join function

Message ID 19b631fa81f72fca60e3374b7ca42b9d0bad6fec.1530660888.git.peter.oh@bowerswilkins.com
State Superseded
Headers show
Series mesh: enable DFS channels in mesh mode | expand

Commit Message

Peter Oh July 3, 2018, 11:40 p.m. UTC 
From: Peter Oh <peter.oh@bowerswilkins.com>

mesh join function consists of 2 parts which are preparing
configurations and sending join event to driver.
Since physical mesh join event could happen either right
after mesh configuration is done or after CAC is done
in case of DFS channel is used, factor out the function
into 2 parts to reduce redundant calls.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
---
 wpa_supplicant/mesh.c             | 124 +++++++++++++++++++++-----------------
 wpa_supplicant/wpa_supplicant_i.h |   1 +
 2 files changed, 71 insertions(+), 54 deletions(-)
diff mbox series

Patch

diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index 38b9fb3..9bbff4c 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -34,6 +34,8 @@  static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
 	wpa_s->current_ssid = NULL;
 	os_free(wpa_s->mesh_rsn);
 	wpa_s->mesh_rsn = NULL;
+	os_free(wpa_s->mesh_params);
+	wpa_s->mesh_params = NULL;
 	/* TODO: leave mesh (stop beacon). This will happen on link down
 	 * anyway, so it's not urgent */
 }
@@ -147,6 +149,41 @@  static void wpas_mesh_copy_groups(struct hostapd_data *bss,
 }
 
 
+static void wpas_mesh_complete_cb(void *ctx)
+{
+	struct wpa_supplicant *wpa_s = (struct wpa_supplicant *)ctx;
+	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
+	struct wpa_ssid *ssid = wpa_s->current_ssid;
+	int ret = 0;
+
+	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
+		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
+		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
+		wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
+	}
+
+	if (wpa_s->ifmsh) {
+		params->ies = wpa_s->ifmsh->mconf->rsn_ie;
+		params->ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
+		params->basic_rates = wpa_s->ifmsh->basic_rates;
+		params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
+		params->conf.ht_opmode = wpa_s->ifmsh->bss[0]->iface->ht_op_mode;
+	}
+
+	ret = wpa_drv_join_mesh(wpa_s, params);
+	if (ret)
+		wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d\n", ret);
+
+	/* hostapd sets the interface down until we associate */
+	wpa_drv_set_operstate(wpa_s, 1);
+
+	if (!ret)
+		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
+
+	return;
+}
+
+
 static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
 				    struct wpa_ssid *ssid,
 				    struct hostapd_freq_params *freq)
@@ -367,11 +404,13 @@  void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
 int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
 			     struct wpa_ssid *ssid)
 {
-	struct wpa_driver_mesh_join_params params;
+	struct wpa_driver_mesh_join_params *params =
+		os_zalloc(sizeof(struct wpa_driver_mesh_join_params));
 	int ret = 0;
 
-	if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency) {
+	if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency || !params) {
 		ret = -ENOENT;
+		os_free(params);
 		goto out;
 	}
 
@@ -381,22 +420,22 @@  int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
 	wpa_s->group_cipher = WPA_CIPHER_NONE;
 	wpa_s->mgmt_group_cipher = 0;
 
-	os_memset(&params, 0, sizeof(params));
-	params.meshid = ssid->ssid;
-	params.meshid_len = ssid->ssid_len;
-	ibss_mesh_setup_freq(wpa_s, ssid, &params.freq);
-	wpa_s->mesh_ht_enabled = !!params.freq.ht_enabled;
-	wpa_s->mesh_vht_enabled = !!params.freq.vht_enabled;
-	if (params.freq.ht_enabled && params.freq.sec_channel_offset)
-		ssid->ht40 = params.freq.sec_channel_offset;
+	params->meshid = ssid->ssid;
+	params->meshid_len = ssid->ssid_len;
+	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
+	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
+	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
+	if (params->freq.ht_enabled && params->freq.sec_channel_offset)
+		ssid->ht40 = params->freq.sec_channel_offset;
+
 	if (wpa_s->mesh_vht_enabled) {
 		ssid->vht = 1;
-		switch (params.freq.bandwidth) {
+		switch (params->freq.bandwidth) {
 		case 80:
-			if (params.freq.center_freq2) {
+			if (params->freq.center_freq2) {
 				ssid->max_oper_chwidth = VHT_CHANWIDTH_80P80MHZ;
 				ssid->vht_center_freq2 =
-					params.freq.center_freq2;
+					params->freq.center_freq2;
 			} else {
 				ssid->max_oper_chwidth = VHT_CHANWIDTH_80MHZ;
 			}
@@ -410,67 +449,44 @@  int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
 		}
 	}
 	if (ssid->beacon_int > 0)
-		params.beacon_int = ssid->beacon_int;
+		params->beacon_int = ssid->beacon_int;
 	else if (wpa_s->conf->beacon_int > 0)
-		params.beacon_int = wpa_s->conf->beacon_int;
+		params->beacon_int = wpa_s->conf->beacon_int;
 	if (ssid->dtim_period > 0)
-		params.dtim_period = ssid->dtim_period;
+		params->dtim_period = ssid->dtim_period;
 	else if (wpa_s->conf->dtim_period > 0)
-		params.dtim_period = wpa_s->conf->dtim_period;
-	params.conf.max_peer_links = wpa_s->conf->max_peer_links;
+		params->dtim_period = wpa_s->conf->dtim_period;
+	params->conf.max_peer_links = wpa_s->conf->max_peer_links;
 	if (ssid->mesh_rssi_threshold < DEFAULT_MESH_RSSI_THRESHOLD) {
-		params.conf.rssi_threshold = ssid->mesh_rssi_threshold;
-		params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
+		params->conf.rssi_threshold = ssid->mesh_rssi_threshold;
+		params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
 	}
 
 	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
-		params.flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
-		params.flags |= WPA_DRIVER_MESH_FLAG_AMPE;
+		params->flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
+		params->flags |= WPA_DRIVER_MESH_FLAG_AMPE;
 		wpa_s->conf->user_mpm = 1;
 	}
 
 	if (wpa_s->conf->user_mpm) {
-		params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
-		params.conf.auto_plinks = 0;
+		params->flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
+		params->conf.auto_plinks = 0;
 	} else {
-		params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
-		params.conf.auto_plinks = 1;
+		params->flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
+		params->conf.auto_plinks = 1;
 	}
-	params.conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
+	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
 
-	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params.freq)) {
+	os_free(wpa_s->mesh_params);
+	wpa_s->mesh_params = params;
+	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
 		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
 		wpa_drv_leave_mesh(wpa_s);
 		ret = -1;
 		goto out;
 	}
 
-	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
-		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
-		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
-		wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
-	}
-
-	if (wpa_s->ifmsh) {
-		params.ies = wpa_s->ifmsh->mconf->rsn_ie;
-		params.ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
-		params.basic_rates = wpa_s->ifmsh->basic_rates;
-		params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
-		params.conf.ht_opmode = wpa_s->ifmsh->bss[0]->iface->ht_op_mode;
-	}
-
-	wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
-		wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
-	ret = wpa_drv_join_mesh(wpa_s, &params);
-	if (ret)
-		wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d", ret);
-
-	/* hostapd sets the interface down until we associate */
-	wpa_drv_set_operstate(wpa_s, 1);
-
-	if (!ret)
-		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
-
+	wpas_mesh_complete_cb(wpa_s);
 out:
 	return ret;
 }
diff --git a/wpa_supplicant/wpa_supplicant_i.h b/wpa_supplicant/wpa_supplicant_i.h
index 2b0dca0..3fdef82 100644
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -810,6 +810,7 @@  struct wpa_supplicant {
 	unsigned int mesh_if_created:1;
 	unsigned int mesh_ht_enabled:1;
 	unsigned int mesh_vht_enabled:1;
+	struct wpa_driver_mesh_join_params *mesh_params;
 #ifdef CONFIG_PMKSA_CACHE_EXTERNAL
 	/* struct external_pmksa_cache::list */
 	struct dl_list mesh_external_pmksa_cache;