Message ID | 20180627131609.13681-2-bugalski.piotr@gmail.com |
---|---|
State | Changes Requested |
Delegated to: | Boris Brezillon |
Headers | show |
Series | New QuadSPI driver for Atmel SAMA5D2 | expand |
Hi, On 27/06/2018 15:16:04+0200, Piotr Bugalski wrote: > Just minor typo fix. Fixed in preparation of new driver. > > Signed-off: Piotr Bugalski <pbu@cryptera.com> This SoB line must match the author. It doesn't matter which one you change. note that you can still submit your patch from an address different from your work address if necessary (git format-patch will insert the proper From line).
Hi Alexandre, Thank you for you comment. On Tue, 3 Jul 2018, Alexandre Belloni wrote: > Hi, > > On 27/06/2018 15:16:04+0200, Piotr Bugalski wrote: >> Just minor typo fix. Fixed in preparation of new driver. >> >> Signed-off: Piotr Bugalski <pbu@cryptera.com> > > This SoB line must match the author. It doesn't matter which one you > change. note that you can still submit your patch from an address > different from your work address if necessary (git format-patch will > insert the proper From line). > I didn't notice this issue, I'll fix it in next release. > -- > Alexandre Belloni, Bootlin (formerly Free Electrons) > Embedded Linux and Kernel engineering > https://bootlin.com > Best Regards, Piotr
diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c index 6c5708bacad8..bdbfaa632dbf 100644 --- a/drivers/mtd/spi-nor/atmel-quadspi.c +++ b/drivers/mtd/spi-nor/atmel-quadspi.c @@ -67,7 +67,7 @@ #define QSPI_CR_LASTXFER BIT(24) /* Bitfields in QSPI_MR (Mode Register) */ -#define QSPI_MR_SSM BIT(0) +#define QSPI_MR_SMM BIT(0) #define QSPI_MR_LLB BIT(1) #define QSPI_MR_WDRBT BIT(2) #define QSPI_MR_SMRM BIT(3) @@ -563,7 +563,7 @@ static int atmel_qspi_init(struct atmel_qspi *aq) qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST); /* Set the QSPI controller in Serial Memory Mode */ - mr = QSPI_MR_NBBITS(8) | QSPI_MR_SSM; + mr = QSPI_MR_NBBITS(8) | QSPI_MR_SMM; qspi_writel(aq, QSPI_MR, mr); src_rate = clk_get_rate(aq->clk);