[1/5] dt-bindings: input: touchscreen: add bindings for eeti touchscreen controller

Describe the bindings for EETI touchscreen controllers.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
 .../bindings/input/touchscreen/eeti.txt       | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/eeti.txt

Hi Daniel,

On Sun, Jun 17, 2018 at 01:46:57PM +0200, Daniel Mack wrote:
> Use touchscreen_parse_properties() to automatically set some of the common
> touchscreen properties. Also make flip_x and flip_y members of the private
> device context and allow setting them through both the module parameters and
> devicetree properties.
> 
> Signed-off-by: Daniel Mack <daniel@zonque.org>
> ---
>  drivers/input/touchscreen/eeti_ts.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
> index cc4fd33f9d6d..e7fade1a895c 100644
> --- a/drivers/input/touchscreen/eeti_ts.c
> +++ b/drivers/input/touchscreen/eeti_ts.c
> @@ -28,6 +28,7 @@
>  #include <linux/moduleparam.h>
>  #include <linux/kernel.h>
>  #include <linux/input.h>
> +#include <linux/input/touchscreen.h>
>  #include <linux/interrupt.h>
>  #include <linux/i2c.h>
>  #include <linux/timer.h>
> @@ -48,6 +49,7 @@ struct eeti_ts {
>  	struct i2c_client *client;
>  	struct input_dev *input;
>  	struct gpio_desc *attn_gpio;
> +	bool flip_x, flip_y;
>  	bool running;
>  };
>  
> @@ -74,10 +76,10 @@ static void eeti_ts_report_event(struct eeti_ts *eeti, u8 *buf)
>  	x >>= res - EETI_TS_BITDEPTH;
>  	y >>= res - EETI_TS_BITDEPTH;
>  
> -	if (flip_x)
> +	if (eeti->flip_x)
>  		x = EETI_MAXVAL - x;
>  
> -	if (flip_y)
> +	if (eeti->flip_y)
>  		y = EETI_MAXVAL - y;
>  
>  	if (buf[0] & REPORT_BIT_HAS_PRESSURE)
> @@ -149,6 +151,7 @@ static void eeti_ts_close(struct input_dev *dev)
>  static int eeti_ts_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *idp)
>  {
> +	struct touchscreen_properties props;
>  	struct device *dev = &client->dev;
>  	struct eeti_ts *eeti;
>  	struct input_dev *input;
> @@ -179,6 +182,8 @@ static int eeti_ts_probe(struct i2c_client *client,
>  	input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0);
>  	input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0);
>  
> +	touchscreen_parse_properties(input, false, &props);
> +
>  	input->name = client->name;
>  	input->id.bustype = BUS_I2C;
>  	input->open = eeti_ts_open;
> @@ -187,6 +192,9 @@ static int eeti_ts_probe(struct i2c_client *client,
>  	eeti->client = client;
>  	eeti->input = input;
>  
> +	eeti->flip_x = flip_x || props.invert_x;
> +	eeti->flip_y = flip_y || props.invert_y;

I would like to get rid completely of these module parameters. The only
user of this drover in mainline is arch/arm/mach-pxa/raumfeld.c and I do
not know how it is mounted there, but we can adjust with static board
properties if needed.

Can we please switch to not only touchscreen_parse_properties() but also
touchscreen_report_pos()?

> +
>  	eeti->attn_gpio = devm_gpiod_get_optional(dev, "attn", GPIOD_IN);
>  	if (IS_ERR(eeti->attn_gpio))
>  		return PTR_ERR(eeti->attn_gpio);
> -- 
> 2.17.1
> 

Thanks.

Hi Dmitry,

On Friday, June 22, 2018 08:59 PM, Dmitry Torokhov wrote:
> On Sun, Jun 17, 2018 at 01:46:57PM +0200, Daniel Mack wrote:
>> +	eeti->flip_x = flip_x || props.invert_x;
>> +	eeti->flip_y = flip_y || props.invert_y;
> 
> I would like to get rid completely of these module parameters. The only
> user of this drover in mainline is arch/arm/mach-pxa/raumfeld.c and I do
> not know how it is mounted there, but we can adjust with static board
> properties if needed.

Yeah, you're right. I know for a fact that this platform does not use 
the module parameters, so let's just drop them.

> Can we please switch to not only touchscreen_parse_properties() but also
> touchscreen_report_pos()?

Didn't know about this one. Nice. Will update the series and repost.


Thanks!
Daniel

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html