@@ -182,6 +182,16 @@ carambola2)
ucidef_set_led_netdev "wan" "WAN" "$board:orange:eth1" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+cf-e214n-v2)
+ ucidef_set_led_netdev "lan" "LAN" "$board:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$board:wan" "eth1"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
+ ucidef_set_rssimon "wlan" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:link1" "wlan" "1" "100" "0" "13"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:link2" "wlan" "26" "100" "-25" "13"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:link3" "wlan" "51" "100" "-50" "13"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:link4" "wlan" "76" "100" "-75" "13"
+ ;;
cf-e316n-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
@@ -504,6 +504,9 @@ ar71xx_board_detect() {
*"Carambola2"*)
name="carambola2"
;;
+ *"CF-E214N v2")
+ name="cf-e214n-v2"
+ ;;
*"CF-E316N v2")
name="cf-e316n-v2"
;;
@@ -215,6 +215,7 @@ platform_check_image() {
bullet-m|\
c-55|\
carambola2|\
+ cf-e214n-v2|\
cf-e316n-v2|\
cf-e320n-v2|\
cf-e355ac|\
@@ -67,6 +67,7 @@ CONFIG_ATH79_MACH_C55=y
CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CF_E214N_V2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CF_E320N_V2=y
CONFIG_ATH79_MACH_CF_E355AC=y
@@ -66,6 +66,7 @@ CONFIG_ATH79_MACH_C55=y
CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CF_E214N_V2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CF_E320N_V2=y
CONFIG_ATH79_MACH_CF_E355AC=y
@@ -2032,6 +2032,14 @@ config ATH79_MACH_RAMBUTAN
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_CF_E214N_V2
+ bool "COMFAST CF-E214N v2 board"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_CF_E316N_V2
bool "COMFAST CF-E316N v2 support"
select SOC_AR934X
@@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_C60) += mach-c60.o
obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
+obj-$(CONFIG_ATH79_MACH_CF_E214N_V2) += mach-cf-e214n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E355AC) += mach-cf-e316n-v2.o
new file mode 100644
@@ -0,0 +1,124 @@
+/*
+ * COMFAST CF-E214N v2
+ * by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+ *
+ * aka CF-E214V2, CF-E214N-V2 and CF-E214Nv2.0 (no FCC ID)
+ *
+ * Copyright (C) 2017 Robert Budde <rl.budde@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+static struct gpio_led cf_e214n_v2_leds_gpio[] __initdata = {
+ {
+ .name = "cf-e214n-v2:wlan",
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .name = "cf-e214n-v2:lan",
+ .gpio = 2,
+ .active_low = 1,
+ }, {
+ .name = "cf-e214n-v2:wan",
+ .gpio = 3,
+ .active_low = 1,
+ }, {
+ .name = "cf-e214n-v2:link1",
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .name = "cf-e214n-v2:link2",
+ .gpio = 12,
+ .active_low = 1,
+ }, {
+ .name = "cf-e214n-v2:link3",
+ .gpio = 14,
+ .active_low = 1,
+ }, {
+ .name = "cf-e214n-v2:link4",
+ .gpio = 16,
+ .active_low = 1,
+ },
+};
+
+/* There's a Pericon Technology PT7A7514 connected to GPIO 13 */
+#define EXT_WATCHDOG_GPIO 13
+static struct timer_list gpio_wdt_timer;
+
+static void gpio_wdt_toggle(unsigned long period)
+{
+ static int state;
+ state = !state;
+ gpio_set_value(EXT_WATCHDOG_GPIO, state);
+ mod_timer(&gpio_wdt_timer, jiffies + period);
+}
+
+static void __init cf_e214n_v2_setup(void)
+{
+ u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
+ u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
+ u8 tmpmac[ETH_ALEN];
+
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cf_e214n_v2_leds_gpio); i++)
+ ath79_gpio_output_select(cf_e214n_v2_leds_gpio[i].gpio,
+ AR934X_GPIO_OUT_GPIO);
+
+ gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
+ gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
+ setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
+ gpio_wdt_toggle(msecs_to_jiffies(1));
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 1);
+
+ /* "LAN" - GMAC0 is connected to the PHY4 of the internal switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* "WAN" - GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_init_mac(tmpmac, macwlan, 0);
+ ath79_register_wmac(ee, tmpmac);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e214n_v2_leds_gpio),
+ cf_e214n_v2_leds_gpio);
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E214N_V2, "CF-E214N-V2", "COMFAST CF-E214N v2",
+ cf_e214n_v2_setup);
@@ -61,6 +61,7 @@ enum ath79_mach_type {
ATH79_MACH_CAP324, /* PowerCloud CAP324 */
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
+ ATH79_MACH_CF_E214N_V2, /* COMFAST CF-E214N v2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
ATH79_MACH_CF_E355AC, /* COMFAST CF-E355AC */
@@ -135,6 +135,14 @@ define Device/carambola2
endef
TARGET_DEVICES += carambola2
+define Device/cf-e214n-v2
+ DEVICE_TITLE := COMFAST CF-E214N v2
+ BOARDNAME := CF-E214N-V2
+ IMAGE_SIZE := 16192k
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
+endef
+TARGET_DEVICES += cf-e214n-v2
+
define Device/cf-e316n-v2
DEVICE_TITLE := COMFAST CF-E316N v2
BOARDNAME := CF-E316N-V2
Based on Robert Budde's patch, with additional reworks. https://github.com/openwrt/openwrt/pull/390 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> --- target/linux/ar71xx/base-files/etc/board.d/01_leds | 10 ++ target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.4 | 1 + target/linux/ar71xx/config-4.9 | 1 + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 8 ++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../files/arch/mips/ath79/mach-cf-e214n-v2.c | 124 +++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/generic.mk | 8 ++ 10 files changed, 158 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e214n-v2.c