Message ID | 1486297918-2536-1-git-send-email-hacks@slashdirt.org |
---|---|
State | Superseded |
Headers | show |
Hi, Please ignore this series for now: since there are SPI-NOR devices which are not wireless APs that could be supported with the same code base, I’m going to resubmit these patches with « rbspi » as the namespace for the new file and attached bits. T. > Le 5 févr. 2017 à 13:31, hacks@slashdirt.org a écrit : > > From: Thibaut VARENE <hacks@slashdirt.org> > > This patch adds support for the MikroTik RouterBOARD mAP lite > https://routerboard.com/RBmAPL-2nD > > Specifications: > - SoC: Qualcomm QCA9533 (650MHz) > - RAM: 64MB > - Storage: 16MB NOR SPI flash > - Wireless: builtin QCA9533, 2x2:2 > - Ethernet: 1x100M > > This is another 16M SPI NOR mikrotik device. The machine file is named > mach-rbxap.c because I plan to add support for most of the other "AP" > RouterBOARD devices in subsequent patches: they share most of the hardware > and thus the same codebase. > > Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> > --- > target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 + > .../linux/ar71xx/base-files/etc/board.d/02_network | 1 + > target/linux/ar71xx/base-files/etc/diag.sh | 3 +- > target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + > .../ar71xx/base-files/lib/upgrade/platform.sh | 7 +- > target/linux/ar71xx/config-4.4 | 1 + > .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 13 ++ > target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + > .../ar71xx/files/arch/mips/ath79/mach-rbxap.c | 209 +++++++++++++++++++++ > .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + > target/linux/ar71xx/image/mikrotik.mk | 9 +- > target/linux/ar71xx/mikrotik/config-default | 1 + > 12 files changed, 250 insertions(+), 4 deletions(-) > create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c > > diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds > index b1ecb02..c52f822 100755 > --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds > +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds > @@ -228,6 +228,11 @@ rb-2011uias-2hnd) > ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04" > ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" > ;; > +rb-mapl-2nd) > + ucidef_set_led_default "power" "POWER" "rb:green:power" "1" > + ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" > + ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" > + ;; > dap-2695-a1) > ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" > ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0" > diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network > index 976440e..639ae55 100755 > --- a/target/linux/ar71xx/base-files/etc/board.d/02_network > +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network > @@ -90,6 +90,7 @@ ar71xx_setup_interfaces() > rb-911g-5hpnd|\ > rb-912uag-2hpnd|\ > rb-912uag-5hpnd|\ > + rb-mapl-2nd|\ > rb-sxt2n|\ > rb-sxt5n|\ > re450|\ > diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh > index edcf621..c7f377e 100644 > --- a/target/linux/ar71xx/base-files/etc/diag.sh > +++ b/target/linux/ar71xx/base-files/etc/diag.sh > @@ -289,7 +289,8 @@ get_status_led() { > rb-911g-5hpacd|\ > rb-911g-5hpnd|\ > rb-912uag-2hpnd|\ > - rb-912uag-5hpnd) > + rb-912uag-5hpnd|\ > + rb-mapl-2nd) > status_led="rb:green:user" > ;; > rb-951ui-2hnd | rb-941-2nd) > diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh > index 3ca2c0d..7c249c5 100755 > --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh > +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh > @@ -868,6 +868,9 @@ ar71xx_board_detect() { > *"RouterBOARD 2011UiAS-2HnD") > name="rb-2011uias-2hnd" > ;; > + *"RouterBOARD mAP L-2nD") > + name="rb-mapl-2nd" > + ;; > *"RouterBOARD SXT Lite2") > name="rb-sxt2n" > ;; > diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh > index cf2aab2..17469b9 100755 > --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh > @@ -343,6 +343,7 @@ platform_check_image() { > pb42|\ > pb44|\ > rb-941-2nd|\ > + rb-mapl-2nd|\ > routerstation-pro|\ > routerstation|\ > wp543|\ > @@ -609,7 +610,8 @@ platform_pre_upgrade() { > local board=$(ar71xx_board_name) > > case "$board" in > - rb-941-2nd) > + rb-941-2nd|\ > + rb-mapl-2nd) > ;; > rb*|\ > c-60|\ > @@ -645,7 +647,8 @@ platform_do_upgrade() { > local board=$(ar71xx_board_name) > > case "$board" in > - rb-941-2nd) > + rb-941-2nd|\ > + rb-mapl-2nd) > PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1 > platform_do_upgrade_combined "$ARGV" > ;; > diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 > index 8ba0c2a..20f1f0b 100644 > --- a/target/linux/ar71xx/config-4.4 > +++ b/target/linux/ar71xx/config-4.4 > @@ -148,6 +148,7 @@ CONFIG_ATH79_MACH_R6100=y > # CONFIG_ATH79_MACH_RB922 is not set > # CONFIG_ATH79_MACH_RB941 is not set > # CONFIG_ATH79_MACH_RB95X is not set > +# CONFIG_ATH79_MACH_RBXAP is not set > # CONFIG_ATH79_MACH_RBSXTLITE is not set > CONFIG_ATH79_MACH_RE450=y > CONFIG_ATH79_MACH_RW2458N=y > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > index 8b6554c..0378fed 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt > @@ -914,6 +914,19 @@ config ATH79_MACH_RB2011 > select ATH79_DEV_WMAC > select ATH79_ROUTERBOOT > > +config ATH79_MACH_RBXAP > + bool "MikroTik RouterBOARD XAP support" > + select SOC_QCA953X > + select ATH79_DEV_ETH > + select ATH79_DEV_GPIO_BUTTONS > + select ATH79_DEV_LEDS_GPIO > + select ATH79_DEV_M25P80 > + select ATH79_DEV_WMAC > + select ATH79_ROUTERBOOT > + help > + Say 'Y' here if you want your kernel to support the > + MikroTik RouterBOARD mAP lite > + > config ATH79_MACH_RBSXTLITE > bool "MikroTik RouterBOARD SXT Lite" > select SOC_AR934X > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile > index e9d69a4..fc104c3 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile > +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile > @@ -152,6 +152,7 @@ obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o > obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o > obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o > obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o > +obj-$(CONFIG_ATH79_MACH_RBXAP) += mach-rbxap.o > obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o > obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o > obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c > new file mode 100644 > index 0000000..7d2f840 > --- /dev/null > +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c > @@ -0,0 +1,209 @@ > +/* > + * MikroTik RouterBOARD *AP (SPI NOR) support > + * > + * - MikroTik RouterBOARD mAPL-2nD > + * > + * Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + */ > + > +#include <linux/export.h> > +#include <linux/platform_device.h> > +#include <linux/phy.h> > +#include <linux/routerboot.h> > +#include <linux/gpio.h> > + > +#include <linux/mtd/mtd.h> > +#include <linux/mtd/partitions.h> > + > +#include <asm/prom.h> > +#include <asm/mach-ath79/ar71xx_regs.h> > +#include <asm/mach-ath79/ath79.h> > + > +#include "common.h" > +#include "dev-eth.h" > +#include "dev-spi.h" > +#include "dev-gpio-buttons.h" > +#include "dev-leds-gpio.h" > +#include "dev-m25p80.h" > +#include "dev-wmac.h" > +#include "machtypes.h" > +#include "routerboot.h" > + > +#define RBXAP_KEYS_POLL_INTERVAL 20 /* msecs */ > +#define RBXAP_KEYS_DEBOUNCE_INTERVAL (3 * RBXAP_KEYS_POLL_INTERVAL) > + > +#define RB_ROUTERBOOT_OFFSET 0x0000 > +#define RB_BIOS_SIZE 0x1000 > +#define RB_SOFT_CFG_SIZE 0x1000 > +#define RB_KERNEL_OFFSET 0xa00000 > +#define RB_KERNEL_SIZE MTDPART_SIZ_FULL > + > +void __init rbxap_wlan_init(int wmac_offset) > +{ > + char *art_buf; > + u8 wlan_mac[ETH_ALEN]; > + > + art_buf = rb_get_wlan_data(); > + if (art_buf == NULL) > + return; > + > + ath79_init_mac(wlan_mac, ath79_mac_base, wmac_offset); > + ath79_register_wmac(art_buf + 0x1000, wlan_mac); > + > + kfree(art_buf); > +} > + > +static struct mtd_partition rbxap_spi_partitions[] = { > + { > + .name = "routerboot", > + .offset = RB_ROUTERBOOT_OFFSET, > + .mask_flags = MTD_WRITEABLE, > + }, > + { > + .name = "hard_config", > + .mask_flags = MTD_WRITEABLE, > + }, > + { > + .name = "bios", > + .size = RB_BIOS_SIZE, > + .mask_flags = MTD_WRITEABLE, > + }, > + { > + .name = "routerboot2", > + .mask_flags = MTD_WRITEABLE, > + }, > + { > + .name = "soft_config", > + .size = RB_SOFT_CFG_SIZE, > + }, > + { > + .name = "rootfs", > + }, > + { > + .name = "kernel", > + .offset = RB_KERNEL_OFFSET, > + .size = RB_KERNEL_SIZE, > + } > +}; > + > +/* calculate the partitions offsets and size based on initial > + * parsing. Kernel is fixed at RB_KERNEL_OFFSET so the rootfs > + * partition adjusts accordingly */ > +static void __init rbxap_init_partitions(const struct rb_info *info) > +{ > + rbxap_spi_partitions[0].size = info->hard_cfg_offs; > + rbxap_spi_partitions[1].offset = info->hard_cfg_offs; > + rbxap_spi_partitions[1].size = info->hard_cfg_size; > + rbxap_spi_partitions[2].offset = info->hard_cfg_offs + info->hard_cfg_size; > + rbxap_spi_partitions[3].offset = rbxap_spi_partitions[2].offset + RB_BIOS_SIZE; > + rbxap_spi_partitions[3].size = info->soft_cfg_offs - rbxap_spi_partitions[3].offset; > + rbxap_spi_partitions[4].offset = info->soft_cfg_offs; > + rbxap_spi_partitions[5].offset = rbxap_spi_partitions[4].offset + RB_SOFT_CFG_SIZE; > + rbxap_spi_partitions[5].size = RB_KERNEL_OFFSET - rbxap_spi_partitions[5].offset; > +} > + > +static struct flash_platform_data rbxap_spi_flash_data = { > + .parts = rbxap_spi_partitions, > + .nr_parts = ARRAY_SIZE(rbxap_spi_partitions), > +}; > + > + > +/* RB mAP L-2nD gpios */ > +#define RBMAPL_GPIO_LED_POWER 17 > +#define RBMAPL_GPIO_LED_USER 14 > +#define RBMAPL_GPIO_LED_ETH 4 > +#define RBMAPL_GPIO_LED_WLAN 11 > +#define RBMAPL_GPIO_BTN_RESET 16 > + > +static struct gpio_led rbmapl_leds[] __initdata = { > + { > + .name = "rb:green:power", > + .gpio = RBMAPL_GPIO_LED_POWER, > + .active_low = 0, > + .default_state = LEDS_GPIO_DEFSTATE_ON, > + }, > + { > + .name = "rb:green:user", > + .gpio = RBMAPL_GPIO_LED_USER, > + .active_low = 0, > + }, > + { > + .name = "rb:green:eth", > + .gpio = RBMAPL_GPIO_LED_ETH, > + .active_low = 0, > + }, > + { > + .name = "rb:green:wlan", > + .gpio = RBMAPL_GPIO_LED_WLAN, > + .active_low = 0, > + }, > +}; > + > +static struct gpio_keys_button rbmapl_gpio_keys[] __initdata = { > + { > + .desc = "Reset button", > + .type = EV_KEY, > + .code = KEY_RESTART, > + .debounce_interval = RBXAP_KEYS_DEBOUNCE_INTERVAL, > + .gpio = RBMAPL_GPIO_BTN_RESET, > + .active_low = 1, > + }, > +}; > + > +static int __init rbxap_setup(int wmac_offset) > +{ > + const struct rb_info *info; > + char buf[64]; > + > + info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000); > + if (!info) > + return -ENODEV; > + > + scnprintf(buf, sizeof(buf), "MikroTik %s", > + (info->board_name) ? info->board_name : ""); > + mips_set_machine_name(buf); > + > + /* fix partitions based on flash parsing */ > + rbxap_init_partitions(info); > + ath79_register_m25p80(&rbxap_spi_flash_data); > + > + /* set the SoC to SW_ONLY_MODE, which connects all PHYs > + * to the internal switch */ > + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); > + ath79_register_mdio(0, 0x0); > + > + /* GMAC0 is left unused */ > + /* GMAC1 is connected to MAC0 on the internal switch */ > + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); > + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; > + ath79_register_eth(1); > + > + rbxap_wlan_init(wmac_offset); > + > + return 0; > +} > + > +/* The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0. > + * Trying to use GMAC0 in direct mode was unsucessful, so we're > + * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal > + * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused. */ > +static void __init rbmapl_setup(void) > +{ > + if (rbxap_setup(1)) /* WLAN MAC is HW MAC + 1 */ > + return; > + > + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds); > + ath79_register_gpio_keys_polled(-1, RBXAP_KEYS_POLL_INTERVAL, > + ARRAY_SIZE(rbmapl_gpio_keys), > + rbmapl_gpio_keys); > + > + /* Clear internal multiplexing */ > + ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, 0); > + ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, 0); > +} > + > +MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); > diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > index 12e81db..1e161de 100644 > --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h > @@ -168,6 +168,7 @@ enum ath79_mach_type { > ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */ > ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ > ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ > + ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ > ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ > ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ > ATH79_MACH_RE450, /* TP-LINK RE450 */ > diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk > index a2b682f..257c618 100644 > --- a/target/linux/ar71xx/image/mikrotik.mk > +++ b/target/linux/ar71xx/image/mikrotik.mk > @@ -25,6 +25,7 @@ TARGET_DEVICES += nand-64m nand-large > > define Device/rb-nor-flash-16M > DEVICE_TITLE := MikroTik RouterBoard with 16 MB NOR flash > + DEVICE_PACKAGES := rbcfg > BLOCKSIZE := 64k > IMAGE_SIZE := 16000k > LOADER_TYPE := elf > @@ -42,4 +43,10 @@ $(Device/rb-nor-flash-16M) > BOARDNAME:= rb-941-2nd > endef > > -TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd > +define Device/rb-xap > +$(Device/rb-nor-flash-16M) > + DEVICE_TITLE := xAP devices > + BOARDNAME:= rb-xap > +endef > + > +TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd rb-xap > diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default > index 324c6f7..8db03f4 100644 > --- a/target/linux/ar71xx/mikrotik/config-default > +++ b/target/linux/ar71xx/mikrotik/config-default > @@ -114,6 +114,7 @@ CONFIG_ATH79_MACH_RB91X=y > CONFIG_ATH79_MACH_RB922=y > CONFIG_ATH79_MACH_RB941=y > CONFIG_ATH79_MACH_RB95X=y > +CONFIG_ATH79_MACH_RBXAP=y > CONFIG_ATH79_MACH_RBSXTLITE=y > # CONFIG_ATH79_MACH_RE450 is not set > # CONFIG_ATH79_MACH_RW2458N is not set > -- > 2.1.4 >
Hi, This series has been resubmitted as PR #800. HTH, T. > Le 7 févr. 2017 à 11:10, Thibaut <hacks@slashdirt.org> a écrit : > > Hi, > > Please ignore this series for now: since there are SPI-NOR devices which are not wireless APs that could be supported with the same code base, I’m going to resubmit these patches with « rbspi » as the namespace for the new file and attached bits. > > T. > >> Le 5 févr. 2017 à 13:31, hacks@slashdirt.org a écrit : >> >> From: Thibaut VARENE <hacks@slashdirt.org> >> >> This patch adds support for the MikroTik RouterBOARD mAP lite >> https://routerboard.com/RBmAPL-2nD >> >> Specifications: >> - SoC: Qualcomm QCA9533 (650MHz) >> - RAM: 64MB >> - Storage: 16MB NOR SPI flash >> - Wireless: builtin QCA9533, 2x2:2 >> - Ethernet: 1x100M >> >> This is another 16M SPI NOR mikrotik device. The machine file is named >> mach-rbxap.c because I plan to add support for most of the other "AP" >> RouterBOARD devices in subsequent patches: they share most of the hardware >> and thus the same codebase. >> >> Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> >> --- >> target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 + >> .../linux/ar71xx/base-files/etc/board.d/02_network | 1 + >> target/linux/ar71xx/base-files/etc/diag.sh | 3 +- >> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + >> .../ar71xx/base-files/lib/upgrade/platform.sh | 7 +- >> target/linux/ar71xx/config-4.4 | 1 + >> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 13 ++ >> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + >> .../ar71xx/files/arch/mips/ath79/mach-rbxap.c | 209 +++++++++++++++++++++ >> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + >> target/linux/ar71xx/image/mikrotik.mk | 9 +- >> target/linux/ar71xx/mikrotik/config-default | 1 + >> 12 files changed, 250 insertions(+), 4 deletions(-) >> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c >> >> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds >> index b1ecb02..c52f822 100755 >> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds >> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds >> @@ -228,6 +228,11 @@ rb-2011uias-2hnd) >> ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04" >> ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" >> ;; >> +rb-mapl-2nd) >> + ucidef_set_led_default "power" "POWER" "rb:green:power" "1" >> + ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" >> + ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" >> + ;; >> dap-2695-a1) >> ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" >> ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0" >> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network >> index 976440e..639ae55 100755 >> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network >> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network >> @@ -90,6 +90,7 @@ ar71xx_setup_interfaces() >> rb-911g-5hpnd|\ >> rb-912uag-2hpnd|\ >> rb-912uag-5hpnd|\ >> + rb-mapl-2nd|\ >> rb-sxt2n|\ >> rb-sxt5n|\ >> re450|\ >> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh >> index edcf621..c7f377e 100644 >> --- a/target/linux/ar71xx/base-files/etc/diag.sh >> +++ b/target/linux/ar71xx/base-files/etc/diag.sh >> @@ -289,7 +289,8 @@ get_status_led() { >> rb-911g-5hpacd|\ >> rb-911g-5hpnd|\ >> rb-912uag-2hpnd|\ >> - rb-912uag-5hpnd) >> + rb-912uag-5hpnd|\ >> + rb-mapl-2nd) >> status_led="rb:green:user" >> ;; >> rb-951ui-2hnd | rb-941-2nd) >> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh >> index 3ca2c0d..7c249c5 100755 >> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh >> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh >> @@ -868,6 +868,9 @@ ar71xx_board_detect() { >> *"RouterBOARD 2011UiAS-2HnD") >> name="rb-2011uias-2hnd" >> ;; >> + *"RouterBOARD mAP L-2nD") >> + name="rb-mapl-2nd" >> + ;; >> *"RouterBOARD SXT Lite2") >> name="rb-sxt2n" >> ;; >> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh >> index cf2aab2..17469b9 100755 >> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh >> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh >> @@ -343,6 +343,7 @@ platform_check_image() { >> pb42|\ >> pb44|\ >> rb-941-2nd|\ >> + rb-mapl-2nd|\ >> routerstation-pro|\ >> routerstation|\ >> wp543|\ >> @@ -609,7 +610,8 @@ platform_pre_upgrade() { >> local board=$(ar71xx_board_name) >> >> case "$board" in >> - rb-941-2nd) >> + rb-941-2nd|\ >> + rb-mapl-2nd) >> ;; >> rb*|\ >> c-60|\ >> @@ -645,7 +647,8 @@ platform_do_upgrade() { >> local board=$(ar71xx_board_name) >> >> case "$board" in >> - rb-941-2nd) >> + rb-941-2nd|\ >> + rb-mapl-2nd) >> PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1 >> platform_do_upgrade_combined "$ARGV" >> ;; >> diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 >> index 8ba0c2a..20f1f0b 100644 >> --- a/target/linux/ar71xx/config-4.4 >> +++ b/target/linux/ar71xx/config-4.4 >> @@ -148,6 +148,7 @@ CONFIG_ATH79_MACH_R6100=y >> # CONFIG_ATH79_MACH_RB922 is not set >> # CONFIG_ATH79_MACH_RB941 is not set >> # CONFIG_ATH79_MACH_RB95X is not set >> +# CONFIG_ATH79_MACH_RBXAP is not set >> # CONFIG_ATH79_MACH_RBSXTLITE is not set >> CONFIG_ATH79_MACH_RE450=y >> CONFIG_ATH79_MACH_RW2458N=y >> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt >> index 8b6554c..0378fed 100644 >> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt >> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt >> @@ -914,6 +914,19 @@ config ATH79_MACH_RB2011 >> select ATH79_DEV_WMAC >> select ATH79_ROUTERBOOT >> >> +config ATH79_MACH_RBXAP >> + bool "MikroTik RouterBOARD XAP support" >> + select SOC_QCA953X >> + select ATH79_DEV_ETH >> + select ATH79_DEV_GPIO_BUTTONS >> + select ATH79_DEV_LEDS_GPIO >> + select ATH79_DEV_M25P80 >> + select ATH79_DEV_WMAC >> + select ATH79_ROUTERBOOT >> + help >> + Say 'Y' here if you want your kernel to support the >> + MikroTik RouterBOARD mAP lite >> + >> config ATH79_MACH_RBSXTLITE >> bool "MikroTik RouterBOARD SXT Lite" >> select SOC_AR934X >> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile >> index e9d69a4..fc104c3 100644 >> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile >> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile >> @@ -152,6 +152,7 @@ obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o >> obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o >> obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o >> obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o >> +obj-$(CONFIG_ATH79_MACH_RBXAP) += mach-rbxap.o >> obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o >> obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o >> obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o >> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c >> new file mode 100644 >> index 0000000..7d2f840 >> --- /dev/null >> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c >> @@ -0,0 +1,209 @@ >> +/* >> + * MikroTik RouterBOARD *AP (SPI NOR) support >> + * >> + * - MikroTik RouterBOARD mAPL-2nD >> + * >> + * Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published >> + * by the Free Software Foundation. >> + */ >> + >> +#include <linux/export.h> >> +#include <linux/platform_device.h> >> +#include <linux/phy.h> >> +#include <linux/routerboot.h> >> +#include <linux/gpio.h> >> + >> +#include <linux/mtd/mtd.h> >> +#include <linux/mtd/partitions.h> >> + >> +#include <asm/prom.h> >> +#include <asm/mach-ath79/ar71xx_regs.h> >> +#include <asm/mach-ath79/ath79.h> >> + >> +#include "common.h" >> +#include "dev-eth.h" >> +#include "dev-spi.h" >> +#include "dev-gpio-buttons.h" >> +#include "dev-leds-gpio.h" >> +#include "dev-m25p80.h" >> +#include "dev-wmac.h" >> +#include "machtypes.h" >> +#include "routerboot.h" >> + >> +#define RBXAP_KEYS_POLL_INTERVAL 20 /* msecs */ >> +#define RBXAP_KEYS_DEBOUNCE_INTERVAL (3 * RBXAP_KEYS_POLL_INTERVAL) >> + >> +#define RB_ROUTERBOOT_OFFSET 0x0000 >> +#define RB_BIOS_SIZE 0x1000 >> +#define RB_SOFT_CFG_SIZE 0x1000 >> +#define RB_KERNEL_OFFSET 0xa00000 >> +#define RB_KERNEL_SIZE MTDPART_SIZ_FULL >> + >> +void __init rbxap_wlan_init(int wmac_offset) >> +{ >> + char *art_buf; >> + u8 wlan_mac[ETH_ALEN]; >> + >> + art_buf = rb_get_wlan_data(); >> + if (art_buf == NULL) >> + return; >> + >> + ath79_init_mac(wlan_mac, ath79_mac_base, wmac_offset); >> + ath79_register_wmac(art_buf + 0x1000, wlan_mac); >> + >> + kfree(art_buf); >> +} >> + >> +static struct mtd_partition rbxap_spi_partitions[] = { >> + { >> + .name = "routerboot", >> + .offset = RB_ROUTERBOOT_OFFSET, >> + .mask_flags = MTD_WRITEABLE, >> + }, >> + { >> + .name = "hard_config", >> + .mask_flags = MTD_WRITEABLE, >> + }, >> + { >> + .name = "bios", >> + .size = RB_BIOS_SIZE, >> + .mask_flags = MTD_WRITEABLE, >> + }, >> + { >> + .name = "routerboot2", >> + .mask_flags = MTD_WRITEABLE, >> + }, >> + { >> + .name = "soft_config", >> + .size = RB_SOFT_CFG_SIZE, >> + }, >> + { >> + .name = "rootfs", >> + }, >> + { >> + .name = "kernel", >> + .offset = RB_KERNEL_OFFSET, >> + .size = RB_KERNEL_SIZE, >> + } >> +}; >> + >> +/* calculate the partitions offsets and size based on initial >> + * parsing. Kernel is fixed at RB_KERNEL_OFFSET so the rootfs >> + * partition adjusts accordingly */ >> +static void __init rbxap_init_partitions(const struct rb_info *info) >> +{ >> + rbxap_spi_partitions[0].size = info->hard_cfg_offs; >> + rbxap_spi_partitions[1].offset = info->hard_cfg_offs; >> + rbxap_spi_partitions[1].size = info->hard_cfg_size; >> + rbxap_spi_partitions[2].offset = info->hard_cfg_offs + info->hard_cfg_size; >> + rbxap_spi_partitions[3].offset = rbxap_spi_partitions[2].offset + RB_BIOS_SIZE; >> + rbxap_spi_partitions[3].size = info->soft_cfg_offs - rbxap_spi_partitions[3].offset; >> + rbxap_spi_partitions[4].offset = info->soft_cfg_offs; >> + rbxap_spi_partitions[5].offset = rbxap_spi_partitions[4].offset + RB_SOFT_CFG_SIZE; >> + rbxap_spi_partitions[5].size = RB_KERNEL_OFFSET - rbxap_spi_partitions[5].offset; >> +} >> + >> +static struct flash_platform_data rbxap_spi_flash_data = { >> + .parts = rbxap_spi_partitions, >> + .nr_parts = ARRAY_SIZE(rbxap_spi_partitions), >> +}; >> + >> + >> +/* RB mAP L-2nD gpios */ >> +#define RBMAPL_GPIO_LED_POWER 17 >> +#define RBMAPL_GPIO_LED_USER 14 >> +#define RBMAPL_GPIO_LED_ETH 4 >> +#define RBMAPL_GPIO_LED_WLAN 11 >> +#define RBMAPL_GPIO_BTN_RESET 16 >> + >> +static struct gpio_led rbmapl_leds[] __initdata = { >> + { >> + .name = "rb:green:power", >> + .gpio = RBMAPL_GPIO_LED_POWER, >> + .active_low = 0, >> + .default_state = LEDS_GPIO_DEFSTATE_ON, >> + }, >> + { >> + .name = "rb:green:user", >> + .gpio = RBMAPL_GPIO_LED_USER, >> + .active_low = 0, >> + }, >> + { >> + .name = "rb:green:eth", >> + .gpio = RBMAPL_GPIO_LED_ETH, >> + .active_low = 0, >> + }, >> + { >> + .name = "rb:green:wlan", >> + .gpio = RBMAPL_GPIO_LED_WLAN, >> + .active_low = 0, >> + }, >> +}; >> + >> +static struct gpio_keys_button rbmapl_gpio_keys[] __initdata = { >> + { >> + .desc = "Reset button", >> + .type = EV_KEY, >> + .code = KEY_RESTART, >> + .debounce_interval = RBXAP_KEYS_DEBOUNCE_INTERVAL, >> + .gpio = RBMAPL_GPIO_BTN_RESET, >> + .active_low = 1, >> + }, >> +}; >> + >> +static int __init rbxap_setup(int wmac_offset) >> +{ >> + const struct rb_info *info; >> + char buf[64]; >> + >> + info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000); >> + if (!info) >> + return -ENODEV; >> + >> + scnprintf(buf, sizeof(buf), "MikroTik %s", >> + (info->board_name) ? info->board_name : ""); >> + mips_set_machine_name(buf); >> + >> + /* fix partitions based on flash parsing */ >> + rbxap_init_partitions(info); >> + ath79_register_m25p80(&rbxap_spi_flash_data); >> + >> + /* set the SoC to SW_ONLY_MODE, which connects all PHYs >> + * to the internal switch */ >> + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); >> + ath79_register_mdio(0, 0x0); >> + >> + /* GMAC0 is left unused */ >> + /* GMAC1 is connected to MAC0 on the internal switch */ >> + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); >> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; >> + ath79_register_eth(1); >> + >> + rbxap_wlan_init(wmac_offset); >> + >> + return 0; >> +} >> + >> +/* The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0. >> + * Trying to use GMAC0 in direct mode was unsucessful, so we're >> + * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal >> + * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused. */ >> +static void __init rbmapl_setup(void) >> +{ >> + if (rbxap_setup(1)) /* WLAN MAC is HW MAC + 1 */ >> + return; >> + >> + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds); >> + ath79_register_gpio_keys_polled(-1, RBXAP_KEYS_POLL_INTERVAL, >> + ARRAY_SIZE(rbmapl_gpio_keys), >> + rbmapl_gpio_keys); >> + >> + /* Clear internal multiplexing */ >> + ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, 0); >> + ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, 0); >> +} >> + >> +MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); >> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h >> index 12e81db..1e161de 100644 >> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h >> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h >> @@ -168,6 +168,7 @@ enum ath79_mach_type { >> ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */ >> ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ >> ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ >> + ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ >> ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ >> ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ >> ATH79_MACH_RE450, /* TP-LINK RE450 */ >> diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk >> index a2b682f..257c618 100644 >> --- a/target/linux/ar71xx/image/mikrotik.mk >> +++ b/target/linux/ar71xx/image/mikrotik.mk >> @@ -25,6 +25,7 @@ TARGET_DEVICES += nand-64m nand-large >> >> define Device/rb-nor-flash-16M >> DEVICE_TITLE := MikroTik RouterBoard with 16 MB NOR flash >> + DEVICE_PACKAGES := rbcfg >> BLOCKSIZE := 64k >> IMAGE_SIZE := 16000k >> LOADER_TYPE := elf >> @@ -42,4 +43,10 @@ $(Device/rb-nor-flash-16M) >> BOARDNAME:= rb-941-2nd >> endef >> >> -TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd >> +define Device/rb-xap >> +$(Device/rb-nor-flash-16M) >> + DEVICE_TITLE := xAP devices >> + BOARDNAME:= rb-xap >> +endef >> + >> +TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd rb-xap >> diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default >> index 324c6f7..8db03f4 100644 >> --- a/target/linux/ar71xx/mikrotik/config-default >> +++ b/target/linux/ar71xx/mikrotik/config-default >> @@ -114,6 +114,7 @@ CONFIG_ATH79_MACH_RB91X=y >> CONFIG_ATH79_MACH_RB922=y >> CONFIG_ATH79_MACH_RB941=y >> CONFIG_ATH79_MACH_RB95X=y >> +CONFIG_ATH79_MACH_RBXAP=y >> CONFIG_ATH79_MACH_RBSXTLITE=y >> # CONFIG_ATH79_MACH_RE450 is not set >> # CONFIG_ATH79_MACH_RW2458N is not set >> -- >> 2.1.4 >> >
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index b1ecb02..c52f822 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -228,6 +228,11 @@ rb-2011uias-2hnd) ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04" ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" ;; +rb-mapl-2nd) + ucidef_set_led_default "power" "POWER" "rb:green:power" "1" + ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" + ;; dap-2695-a1) ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 976440e..639ae55 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -90,6 +90,7 @@ ar71xx_setup_interfaces() rb-911g-5hpnd|\ rb-912uag-2hpnd|\ rb-912uag-5hpnd|\ + rb-mapl-2nd|\ rb-sxt2n|\ rb-sxt5n|\ re450|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index edcf621..c7f377e 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -289,7 +289,8 @@ get_status_led() { rb-911g-5hpacd|\ rb-911g-5hpnd|\ rb-912uag-2hpnd|\ - rb-912uag-5hpnd) + rb-912uag-5hpnd|\ + rb-mapl-2nd) status_led="rb:green:user" ;; rb-951ui-2hnd | rb-941-2nd) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 3ca2c0d..7c249c5 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -868,6 +868,9 @@ ar71xx_board_detect() { *"RouterBOARD 2011UiAS-2HnD") name="rb-2011uias-2hnd" ;; + *"RouterBOARD mAP L-2nD") + name="rb-mapl-2nd" + ;; *"RouterBOARD SXT Lite2") name="rb-sxt2n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index cf2aab2..17469b9 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -343,6 +343,7 @@ platform_check_image() { pb42|\ pb44|\ rb-941-2nd|\ + rb-mapl-2nd|\ routerstation-pro|\ routerstation|\ wp543|\ @@ -609,7 +610,8 @@ platform_pre_upgrade() { local board=$(ar71xx_board_name) case "$board" in - rb-941-2nd) + rb-941-2nd|\ + rb-mapl-2nd) ;; rb*|\ c-60|\ @@ -645,7 +647,8 @@ platform_do_upgrade() { local board=$(ar71xx_board_name) case "$board" in - rb-941-2nd) + rb-941-2nd|\ + rb-mapl-2nd) PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1 platform_do_upgrade_combined "$ARGV" ;; diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 8ba0c2a..20f1f0b 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -148,6 +148,7 @@ CONFIG_ATH79_MACH_R6100=y # CONFIG_ATH79_MACH_RB922 is not set # CONFIG_ATH79_MACH_RB941 is not set # CONFIG_ATH79_MACH_RB95X is not set +# CONFIG_ATH79_MACH_RBXAP is not set # CONFIG_ATH79_MACH_RBSXTLITE is not set CONFIG_ATH79_MACH_RE450=y CONFIG_ATH79_MACH_RW2458N=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 8b6554c..0378fed 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -914,6 +914,19 @@ config ATH79_MACH_RB2011 select ATH79_DEV_WMAC select ATH79_ROUTERBOOT +config ATH79_MACH_RBXAP + bool "MikroTik RouterBOARD XAP support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_ROUTERBOOT + help + Say 'Y' here if you want your kernel to support the + MikroTik RouterBOARD mAP lite + config ATH79_MACH_RBSXTLITE bool "MikroTik RouterBOARD SXT Lite" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index e9d69a4..fc104c3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -152,6 +152,7 @@ obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o +obj-$(CONFIG_ATH79_MACH_RBXAP) += mach-rbxap.o obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c new file mode 100644 index 0000000..7d2f840 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbxap.c @@ -0,0 +1,209 @@ +/* + * MikroTik RouterBOARD *AP (SPI NOR) support + * + * - MikroTik RouterBOARD mAPL-2nD + * + * Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/export.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/routerboot.h> +#include <linux/gpio.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/prom.h> +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-spi.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "routerboot.h" + +#define RBXAP_KEYS_POLL_INTERVAL 20 /* msecs */ +#define RBXAP_KEYS_DEBOUNCE_INTERVAL (3 * RBXAP_KEYS_POLL_INTERVAL) + +#define RB_ROUTERBOOT_OFFSET 0x0000 +#define RB_BIOS_SIZE 0x1000 +#define RB_SOFT_CFG_SIZE 0x1000 +#define RB_KERNEL_OFFSET 0xa00000 +#define RB_KERNEL_SIZE MTDPART_SIZ_FULL + +void __init rbxap_wlan_init(int wmac_offset) +{ + char *art_buf; + u8 wlan_mac[ETH_ALEN]; + + art_buf = rb_get_wlan_data(); + if (art_buf == NULL) + return; + + ath79_init_mac(wlan_mac, ath79_mac_base, wmac_offset); + ath79_register_wmac(art_buf + 0x1000, wlan_mac); + + kfree(art_buf); +} + +static struct mtd_partition rbxap_spi_partitions[] = { + { + .name = "routerboot", + .offset = RB_ROUTERBOOT_OFFSET, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "hard_config", + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "bios", + .size = RB_BIOS_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "routerboot2", + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "soft_config", + .size = RB_SOFT_CFG_SIZE, + }, + { + .name = "rootfs", + }, + { + .name = "kernel", + .offset = RB_KERNEL_OFFSET, + .size = RB_KERNEL_SIZE, + } +}; + +/* calculate the partitions offsets and size based on initial + * parsing. Kernel is fixed at RB_KERNEL_OFFSET so the rootfs + * partition adjusts accordingly */ +static void __init rbxap_init_partitions(const struct rb_info *info) +{ + rbxap_spi_partitions[0].size = info->hard_cfg_offs; + rbxap_spi_partitions[1].offset = info->hard_cfg_offs; + rbxap_spi_partitions[1].size = info->hard_cfg_size; + rbxap_spi_partitions[2].offset = info->hard_cfg_offs + info->hard_cfg_size; + rbxap_spi_partitions[3].offset = rbxap_spi_partitions[2].offset + RB_BIOS_SIZE; + rbxap_spi_partitions[3].size = info->soft_cfg_offs - rbxap_spi_partitions[3].offset; + rbxap_spi_partitions[4].offset = info->soft_cfg_offs; + rbxap_spi_partitions[5].offset = rbxap_spi_partitions[4].offset + RB_SOFT_CFG_SIZE; + rbxap_spi_partitions[5].size = RB_KERNEL_OFFSET - rbxap_spi_partitions[5].offset; +} + +static struct flash_platform_data rbxap_spi_flash_data = { + .parts = rbxap_spi_partitions, + .nr_parts = ARRAY_SIZE(rbxap_spi_partitions), +}; + + +/* RB mAP L-2nD gpios */ +#define RBMAPL_GPIO_LED_POWER 17 +#define RBMAPL_GPIO_LED_USER 14 +#define RBMAPL_GPIO_LED_ETH 4 +#define RBMAPL_GPIO_LED_WLAN 11 +#define RBMAPL_GPIO_BTN_RESET 16 + +static struct gpio_led rbmapl_leds[] __initdata = { + { + .name = "rb:green:power", + .gpio = RBMAPL_GPIO_LED_POWER, + .active_low = 0, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "rb:green:user", + .gpio = RBMAPL_GPIO_LED_USER, + .active_low = 0, + }, + { + .name = "rb:green:eth", + .gpio = RBMAPL_GPIO_LED_ETH, + .active_low = 0, + }, + { + .name = "rb:green:wlan", + .gpio = RBMAPL_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button rbmapl_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RBXAP_KEYS_DEBOUNCE_INTERVAL, + .gpio = RBMAPL_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static int __init rbxap_setup(int wmac_offset) +{ + const struct rb_info *info; + char buf[64]; + + info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000); + if (!info) + return -ENODEV; + + scnprintf(buf, sizeof(buf), "MikroTik %s", + (info->board_name) ? info->board_name : ""); + mips_set_machine_name(buf); + + /* fix partitions based on flash parsing */ + rbxap_init_partitions(info); + ath79_register_m25p80(&rbxap_spi_flash_data); + + /* set the SoC to SW_ONLY_MODE, which connects all PHYs + * to the internal switch */ + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); + ath79_register_mdio(0, 0x0); + + /* GMAC0 is left unused */ + /* GMAC1 is connected to MAC0 on the internal switch */ + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); + + rbxap_wlan_init(wmac_offset); + + return 0; +} + +/* The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0. + * Trying to use GMAC0 in direct mode was unsucessful, so we're + * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal + * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused. */ +static void __init rbmapl_setup(void) +{ + if (rbxap_setup(1)) /* WLAN MAC is HW MAC + 1 */ + return; + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds); + ath79_register_gpio_keys_polled(-1, RBXAP_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rbmapl_gpio_keys), + rbmapl_gpio_keys); + + /* Clear internal multiplexing */ + ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, 0); + ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, 0); +} + +MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 12e81db..1e161de 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -168,6 +168,7 @@ enum ath79_mach_type { ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ + ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ ATH79_MACH_RE450, /* TP-LINK RE450 */ diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk index a2b682f..257c618 100644 --- a/target/linux/ar71xx/image/mikrotik.mk +++ b/target/linux/ar71xx/image/mikrotik.mk @@ -25,6 +25,7 @@ TARGET_DEVICES += nand-64m nand-large define Device/rb-nor-flash-16M DEVICE_TITLE := MikroTik RouterBoard with 16 MB NOR flash + DEVICE_PACKAGES := rbcfg BLOCKSIZE := 64k IMAGE_SIZE := 16000k LOADER_TYPE := elf @@ -42,4 +43,10 @@ $(Device/rb-nor-flash-16M) BOARDNAME:= rb-941-2nd endef -TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd +define Device/rb-xap +$(Device/rb-nor-flash-16M) + DEVICE_TITLE := xAP devices + BOARDNAME:= rb-xap +endef + +TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd rb-xap diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 324c6f7..8db03f4 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -114,6 +114,7 @@ CONFIG_ATH79_MACH_RB91X=y CONFIG_ATH79_MACH_RB922=y CONFIG_ATH79_MACH_RB941=y CONFIG_ATH79_MACH_RB95X=y +CONFIG_ATH79_MACH_RBXAP=y CONFIG_ATH79_MACH_RBSXTLITE=y # CONFIG_ATH79_MACH_RE450 is not set # CONFIG_ATH79_MACH_RW2458N is not set