@@ -199,6 +199,9 @@ rb-750)
ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
+rb-941-2nd)
+ ucidef_set_led_timer "act" "act" "rb:green:act" "1000" "1000"
+ ;;
rb-2011l|\
rb-2011uas|\
rb-2011uias|\
@@ -237,6 +237,10 @@ ar71xx_setup_interfaces()
dap-2695-a1)
ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
;;
+ rb-941-2nd)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1"
+ ;;
db120|\
rb-2011l|\
rb-2011uas|\
@@ -288,7 +288,7 @@ get_status_led() {
rb-912uag-5hpnd)
status_led="rb:green:user"
;;
- rb-951ui-2hnd)
+ rb-951ui-2hnd | rb-941-2nd)
status_led="rb:green:act"
;;
rb-sxt2n|\
@@ -827,6 +827,9 @@ ar71xx_board_detect() {
*"RouterBOARD 912UAG-5HPnD")
name="rb-912uag-5hpnd"
;;
+ *"RouterBOARD 941-2nD")
+ name="rb-941-2nd"
+ ;;
*"RouterBOARD 951G-2HnD")
name="rb-951g-2hnd"
;;
@@ -11,6 +11,8 @@ RAMFS_COPY_DATA=/lib/ar71xx.sh
CI_BLKSZ=65536
CI_LDADR=0x80060000
+PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
+
platform_find_partitions() {
local first dev size erasesize name
while read dev size erasesize name; do
@@ -40,6 +42,13 @@ platform_find_kernelpart() {
done
}
+platform_find_rootfspart() {
+ local part
+ for part in "${1%:*}" "${1#*:}"; do
+ [ "$part" != "$2" ] && echo "$part"; break
+ done
+}
+
platform_do_upgrade_combined() {
local partitions=$(platform_find_partitions)
local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
@@ -53,13 +62,22 @@ platform_do_upgrade_combined() {
[ ${root_blocks:-0} -gt 0 ] && \
[ ${erase_size:-0} -gt 0 ];
then
+ local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart")
local append=""
[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
- ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
- dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
- mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
+ if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then
+ ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
+ dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
+ mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
+ elif [ -n "$rootfspart" ]; then
+ dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
+ mtd write - $kernelpart
+ dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
+ mtd -r $append write - $rootfspart
+ fi
fi
+ PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
}
tplink_get_image_hwid() {
@@ -308,6 +326,7 @@ platform_check_image() {
ls-sr71|\
pb42|\
pb44|\
+ rb-941-2nd|\
routerstation-pro|\
routerstation|\
wp543|\
@@ -586,6 +605,10 @@ platform_do_upgrade() {
local board=$(ar71xx_board_name)
case "$board" in
+ rb-941-2nd)
+ PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1
+ platform_do_upgrade_combined "$ARGV"
+ ;;
all0258n)
platform_do_upgrade_allnet "0x9f050000" "$ARGV"
;;
@@ -143,6 +143,7 @@ CONFIG_ATH79_MACH_R6100=y
# CONFIG_ATH79_MACH_RB750 is not set
# CONFIG_ATH79_MACH_RB91X is not set
# CONFIG_ATH79_MACH_RB922 is not set
+# CONFIG_ATH79_MACH_RB941 is not set
# CONFIG_ATH79_MACH_RB95X is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
CONFIG_ATH79_MACH_RE450=y
@@ -860,6 +860,16 @@ config ATH79_MACH_RB922
select ATH79_ROUTERBOOT
select RLE_DECOMPRESS
+config ATH79_MACH_RB941
+ bool "MikroTik RouterBOARD 941-2nd support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+
config ATH79_MACH_RB95X
bool "MikroTik RouterBOARD 95X support"
select SOC_AR934X
@@ -147,6 +147,7 @@ obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o
+obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o
obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
new file mode 100644
@@ -0,0 +1,174 @@
+/*
+ * MikroTik RouterBOARD 941-2nD support
+ *
+ * Copyright (C) 2016 Sergey Sergeev <adron@yapic.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/ar8216_platform.h>
+#include <linux/rle.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+
+#include <linux/mtd/mtd.h>
+//#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-spi.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+//#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "routerboot.h"
+
+#define RB941_GPIO_LED_ACT 14
+#define RB941_GPIO_BTN_RESET 16
+
+#define RB941_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RB941_KEYS_DEBOUNCE_INTERVAL (3 * RB941_KEYS_POLL_INTERVAL)
+
+#define RB_ROUTERBOOT_OFFSET 0x0000
+#define RB_ROUTERBOOT_SIZE 0xe000
+#define RB_HARD_CFG_OFFSET 0xe000
+#define RB_HARD_CFG_SIZE 0x1000
+#define RB_BIOS_OFFSET 0xf000
+#define RB_BIOS_SIZE 0x1000
+#define RB_ROUTERBOOT2_OFFSET 0x10000
+#define RB_ROUTERBOOT2_SIZE 0xf000
+#define RB_SOFT_CFG_OFFSET 0x1f000
+#define RB_SOFT_CFG_SIZE 0x1000
+#define RB_ROOTFS_OFFSET 0x20000
+#define RB_ROOTFS_SIZE 0x9e0000
+#define RB_KERNEL_OFFSET 0xa00000
+#define RB_KERNEL_SIZE MTDPART_SIZ_FULL
+
+void __init rb941_wlan_init(void)
+{
+ char *art_buf;
+ u8 wlan_mac[ETH_ALEN];
+
+ art_buf = rb_get_wlan_data();
+ if (art_buf == NULL)
+ return;
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, 11);
+ ath79_register_wmac(art_buf + 0x1000, wlan_mac);
+
+ kfree(art_buf);
+}
+
+static struct mtd_partition rb941_spi_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = RB_ROUTERBOOT_OFFSET,
+ .mask_flags = MTD_WRITEABLE,
+ .size = RB_ROUTERBOOT_SIZE,
+ }, {
+ .name = "hard_config",
+ .offset = RB_HARD_CFG_OFFSET,
+ .size = RB_HARD_CFG_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = RB_BIOS_OFFSET,
+ .size = RB_BIOS_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "routerboot2",
+ .offset = RB_ROUTERBOOT2_OFFSET,
+ .size = RB_ROUTERBOOT2_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .offset = RB_SOFT_CFG_OFFSET,
+ .size = RB_SOFT_CFG_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "rootfs",
+ .offset = RB_ROOTFS_OFFSET,
+ .size = RB_ROOTFS_SIZE,
+ }, {
+ .name = "kernel",
+ .offset = RB_KERNEL_OFFSET,
+ .size = RB_KERNEL_SIZE,
+ }
+};
+
+static struct flash_platform_data rb941_spi_flash_data = {
+ .parts = rb941_spi_partitions,
+ .nr_parts = ARRAY_SIZE(rb941_spi_partitions),
+};
+
+static struct gpio_led rb941_leds[] __initdata = {
+ {
+ .name = "rb:green:act",
+ .gpio = RB941_GPIO_LED_ACT,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button rb941_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RB941_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RB941_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init rb941_setup(void)
+{
+ const struct rb_info *info;
+ //try to get rb_info data
+ info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000);
+ if (!info){
+ pr_err("%s: Can't get rb_info data from flash!\n", __func__);
+ //return -EINVAL; //Not critical ... continue!
+ }
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+ ath79_register_m25p80(&rb941_spi_flash_data);
+ ath79_register_mdio(0, 0x0);
+
+ /* WAN. We have no WAN. Only LAN. */
+ /*ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_register_eth(0); */
+
+ /* LAN */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ //ath79_register_usb();
+
+ rb941_wlan_init();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb941_leds), rb941_leds);
+ ath79_register_gpio_keys_polled(-1, RB941_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb941_gpio_keys),
+ rb941_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_941, "H951L", "MikroTik RouterBOARD 941-2nD", rb941_setup);
@@ -162,6 +162,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */
+ ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
@@ -847,6 +847,29 @@ define Image/Build/Zcomax
fi
endef
+ifeq ($(SUBTARGET),mikrotik)
+
+define Device/rb-nor-flash-16M
+ DEVICE_PROFILE := MikrotikDefault MikrotikNorFlash
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 16000k
+ KERNEL2MINOR_ARGS := -s 1024 -e
+ LOADER_TYPE := elf
+ KERNEL_INSTALL := 1
+ KERNEL := kernel-bin | lzma | loader-kernel | kernel2minor $$(KERNEL2MINOR_ARGS)
+ KERNEL_INITRAMFS := kernel-bin | lzma | loader-kernel
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/rb-941-2nd
+$(Device/rb-nor-flash-16M)
+ BOARDNAME:= rb-941-2nd
+endef
+TARGET_DEVICES += rb-941-2nd
+
+endif # ifeq ($(SUBTARGET),mikrotik)
+
# $(1): template name to be defined.
# $(2): squashfs suffix to be used.
new file mode 100644
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/MikrotikNorFlash
+ NAME:=NorFlash Profile
+ PACKAGES:=kmod-ath9k
+endef
+
+define Profile/MikrotikNorFlash/Description
+ Package set optimized for the Mikrotik's boards with single NOR flash(16MB or more).
+endef
+$(eval $(call Profile,MikrotikNorFlash))